Juin Acharjee

Dr. Juin Acharjee


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2018 in AEU - International Journal of Electronics and Communications
Verified
Journal Article
Closed access
JAJuin Acharjee
Juin Acharjee
KMKaushik Mandal
Kaushik Mandal
SMSujit Kumar Mandal
Sujit Kumar Mandal

16 September 2016 in Journal of Electromagnetic Waves and Applications
Verified
Journal Article
Closed access
JAJuin Acharjee
Juin Acharjee
KMKaushik Mandal
Kaushik Mandal
SMSujit Kumar Mandal
Sujit Kumar Mandal
PSPartha Pratim Sarkar
Partha Pratim Sarkar
This article presents a compact, enhanced bandwidth, and variable dual band notched printed monopole antenna for ultra wideband (UWB) applications. By inserting a simple inverted L-shaped slot in the ground plane and modifying the lower edge of the patch, wider bandwidth with usable fractional bandwidth of 139.2% (3.1–17.3 GHz) is achieved whereas two inverted U-shaped slots in the corner modified patch are embedded to realize two notch bands exactly at WiMAX (3.25–3.75 GHz) and WLAN (5.1–5.9 GHz). A precise design formula is also proposed to calculate the length of the slots. The proposed simple antenna structure with a 50 Ω feed line has been obtained within a small size of 0.11λ × 0.19λ. The simulated results are validated using measured results to show potentiality of the proposed antenna structure in UWB applications.

27 June 2017 in Microwave and Optical Technology Letters
Verified
Journal Article
Closed access
PDF file
JAJuin Acharjee
Juin Acharjee
KMKaushik Mandal
Kaushik Mandal
SMSujit Kumar Mandal
Sujit Kumar Mandal
PSPartha Pratim Sarkar
Partha Pratim Sarkar

16 November 2023 in Frequenz
Verified
Journal Article
Closed access
LDLaxmikant Dewangan
Laxmikant Dewangan
MPMegh Sainadh Patinavalasa
Megh Sainadh Patinavalasa
JAJuin Acharjee
Juin Acharjee
SSShrey Anant Sandiman
Shrey Anant Sandiman
SGSaptarshi Ghosh
Saptarshi Ghosh
NMNipun Kumar Mishra
Nipun Kumar Mishra
In this work, the design of broadband, wide-angle, direction-independent metamaterial (MM) electromagnetic wave (EM) absorber for K-band frequency application is investigated and validated experimentally. The unit cell of the metamaterial absorber consists of four 90° rotated L-shaped metallic patches imprinted on a dielectric substrate backed by a metallic sheet. The structure yield absorption in the broad frequency ranges from 22.5 to 29.3 GHz for both TE and TM polarized waves with more than 90 % absorptivity having a wide fractional bandwidth of (6.8 GHz) 25.8 %. The structure is four-fold symmetric and hence yields polarization insensitivity for different angles of polarization under both TE and TM polarized waves. The structure is also investigated under oblique incidence where the 80 % absorptivity holds up to 45° incident angles for both TE and TM waves. The absorption mechanism is explained with the help of top and bottom surface current distribution, induced electric field, and parametric analysis. To verify the resonance in the structure, characteristic mode, and equivalent circuit analysis have been carried out and presented. A prototype of the absorber has been fabricated and simulated results are validated with measured results. Measured results are showing good agreement with the simulated responses. The novelty of the proposed absorber lies in its unique metallic pattern on a λ 0/8 (concerning the canter frequency of absorption bandwidth) thin FR-4 substrate while showing the wide absorption bandwidth and direction independence to normal and oblique incidence. The compact nature of the absorber and broadband response with good polarization insensitivity at normal and oblique incidence makes it commercially suitable for the reduction of radar cross section (RCS) in stealth applications at the K-band.

13 December 2019 in Radioengineering
Verified
Journal Article
Closed access
JAJuin Acharjee
Juin Acharjee
RKR. L. Kumar
R. L. Kumar
KMK. Mandal
K. Mandal
SMS. K. Mandal
S. K. Mandal

20 November 2025 in Frequenz
Verified
Journal Article
Closed access
SSShrey Anant Sandiman
Shrey Anant Sandiman
LDLaxmikant Dewangan
Laxmikant Dewangan
STSrivishal Tripathi
Srivishal Tripathi
BDBalwinder Singh Dhaliwal
Balwinder Singh Dhaliwal
JAJuin Acharjee
Juin Acharjee
NMNipun Kumar Mishra
Nipun Kumar Mishra
In this communication, a single-layered (resistive ink-dielectric-metal based) wide-band frequency selective surface microwave absorber using a unique pattern of resistive ink is presented analytically and experimentally for the reduction of radar cross section (RCS) in stealth technology. As compared to multilayer designs, single layer designs are more easy to deploy in practical applications like stealth technology. Further in contrast to other options, resistive ink has numerous benefits, including consistent wideband absorption, uniform resistance distribution, low cost, and material flexibility. In this work four-fold symmetric topology based on resistive ink is imprinted using screen printing technology on a copper-backed FR-4 dielectric substrate to yield polarization insensitive response. Absorptivity over 90 % has achieved over the frequency range of 17.2–26.5 GHz, associated to a fractional bandwidth of 42.5 % for normal incidence of electromagnetic (EM) wave with two absorption peaks at 19.4 GHz and 22.9 GHz covering the K U and K bands. In the entire band, more than 20 dB monostatic RCS reduction is obtained with a maximum RCS reduction of 38 dB at 22.9 GHz. Current distribution on the upper and lower surface, along with the induced electric fields at absorption peaks, and equivalent circuits have presented to examine the absorption mechanism. The proposed design is evaluated for transverse electric (TE) and transverse magnetic (TM) waves under oblique incidence, and for varying polarization angles in TE and TM mode, demonstrating wide angular stability. A prototype has been fabricated, and the measured outcomes are compared and validated against the simulation results. The novelty of the proposed absorber lies in its distinctive single layer λ 1 /11 ( λ 1 corresponding to the lower absorbing frequency) thin topology made from resistive ink, which shows polarization insensitivity and wide angular stability. All the above-mentioned attributes along with 18 % fractional bandwidth of 20 dB RCS reduction make it commercially appropriate for RCS reduction in stealth applications.