Jung Keun Lee

Dr. Jung Keun Lee

School of ICT, Robotics & Mechanical Engineering, Hankyong National University, Anseong 17579, Gyeonggi-do, Korea
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 March 2012 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
JLJung Keun Lee
Jung Keun Lee
EPEdward J. Park
Edward J. Park
SRStephen N. Robinovitch
Stephen N. Robinovitch
This paper proposes a Kalman filter-based attitude (i.e., roll and pitch) estimation algorithm using an inertial sensor composed of a triaxial accelerometer and a triaxial gyroscope. In particular, the proposed algorithm has been developed for accurate attitude estimation during dynamic conditions, in which external acceleration is present. Although external acceleration is the main source of the attitude estimation error and despite the need for its accurate estimation in many applications, this problem that can be critical for the attitude estimation has not been addressed explicitly in the literature. Accordingly, this paper addresses the combined estimation problem of the attitude and external acceleration. Experimental tests were conducted to verify the performance of the proposed algorithm in various dynamic condition settings and to provide further insight into the variations in the estimation accuracy. Furthermore, two different approaches for dealing with the estimation problem during dynamic conditions were compared, i.e., threshold-based switching approach versus acceleration model-based approach. Based on an external acceleration model, the proposed algorithm was capable of estimating accurate attitudes and external accelerations for short accelerated periods, showing its high effectiveness during short-term fast dynamic conditions. Contrariwise, when the testing condition involved prolonged high external accelerations, the proposed algorithm exhibited gradually increasing errors. However, as soon as the condition returned to static or quasi-static conditions, the algorithm was able to stabilize the estimation error, regaining its high estimation accuracy.

25 March 2022 in Sensors
Verified
Journal Article
Open access
PDF file
CLChang June Lee
Chang June Lee
JLJung Keun Lee
Jung Keun Lee
In biomechanics, joint kinetics has an important role in evaluating the mechanical load of the joint and understanding its motor function. Although an optical motion capture (OMC) system has mainly been used to evaluate joint kinetics in combination with force plates, inertial motion capture (IMC) systems have recently been emerging in joint kinetic analysis due to their wearability and ubiquitous measurement capability. In this regard, numerous studies have been conducted to estimate joint kinetics using IMC-based wearable systems. However, these have not been comprehensively addressed yet. Thus, the aim of this review is to explore the methodology of the current studies on estimating joint kinetic variables by means of an IMC system. From a systematic search of the literature, 48 studies were selected. This paper summarizes the content of the selected literature in terms of the (i) study characteristics, (ii) methodologies, and (iii) study results. The estimation methods of the selected studies are categorized into two types: the inverse dynamics-based method and the machine learning-based method. While these two methods presented different characteristics in estimating the kinetic variables, it was demonstrated in the literature that both methods could be applied with good performance for the kinetic analysis of joints in different daily activities.

23 May 2019 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
JLJung Keun Lee
Jung Keun Lee
This paper proposes an inertial and magnetic sensing-based parallel orientation Kalman filter (KF), which is composed of two separate KFs: one for attitude estimation with an external acceleration model as presented in author's previous work and the other for heading estimation with a magnetic disturbance model. The novelty of the proposed attitude-heading KF, compared to other model-based KFs, is that the disturbance models are implemented by inserting them into the measurement equations without state-augmentation. In this case, there is no increase in the matrix size of the corresponding KF structure, which is advantageous as the computational cost is approximately halved when compared with the state-augmentation type approaches. The proposed KF has been experimentally verified in magnetically disturbed conditions. The proposed method has advantages over the KF with state-augmentation in the calculation efficiency and ease of use.

28 August 2023 in Sensors
Verified
Journal Article
Open access
PDF file
JCJi Seok Choi
Ji Seok Choi
JLJung Keun Lee
Jung Keun Lee
The nine-axis inertial and measurement unit (IMU)-based three-dimensional (3D) orientation estimation is a fundamental part of inertial motion capture. Recently, owing to the successful utilization of deep learning in various applications, orientation estimation neural networks (NNs) trained on large datasets, including nine-axis IMU signals and reference orientation data, have been developed. During the training process, the limited amount of training data is a critical issue in the development of powerful networks. Data augmentation, which increases the amount of training data, is a key approach for addressing the data shortage problem and thus for improving the estimation performance. However, to the best of our knowledge, no studies have been conducted to analyze the effects of data augmentation techniques on estimation performance in orientation estimation networks using IMU sensors. This paper selects three data augmentation techniques for IMU-based orientation estimation NNs, i.e., augmentation by virtual rotation, bias addition, and noise addition (which are hereafter referred to as rotation, bias, and noise, respectively). Then, this paper analyzes the effects of these augmentation techniques on estimation accuracy in recurrent neural networks, for a total of seven combinations (i.e., rotation only, bias only, noise only, rotation and bias, rotation and noise, and rotation and bias and noise). The evaluation results show that, among a total of seven augmentation cases, four cases including ‘rotation’ (i.e., rotation only, rotation and bias, rotation and noise, and rotation and bias and noise) occupy the top four. Therefore, it may be concluded that the augmentation effect of rotation is overwhelming compared to those of bias and noise. By applying rotation augmentation, the performance of the NN can be significantly improved. The analysis of the effect of the data augmentation techniques presented in this paper may provide insights for developing robust IMU-based orientation estimation networks.

10 January 2024 in Sensors
Verified
Journal Article
Open access
PDF file
CLChang June Lee
Chang June Lee
JLJung Keun Lee
Jung Keun Lee
In ubiquitous healthcare systems, energy expenditure estimation based on wearable sensors such as inertial measurement units (IMUs) is important for monitoring the intensity of physical activity. Although several studies have reported data-driven methods to estimate energy expenditure during activities of daily living using wearable sensor signals, few have evaluated the performance while walking at various speeds and inclines. In this study, we present a hybrid model comprising a convolutional neural network (CNN) and long short-term memory (LSTM) to estimate the steady-state energy expenditure under various walking conditions based solely on IMU data. To implement and evaluate the model, we performed level/inclined walking and level running experiments on a treadmill. With regard to the model inputs, the performance of the proposed model based on fixed-size sequential data was compared with that of a method based on stride-segmented data under different conditions in terms of the sensor location, input sequence format, and neural network model. Based on the experimental results, the following conclusions were drawn: (i) the CNN–LSTM model using a two-second sequence from the IMU attached to the lower body yielded optimal performance, and (ii) although the stride-segmented data-based method showed superior performance, the performance difference between the two methods was not significant; therefore, the proposed model based on fixed-size sequential data may be considered more practical as it does not require heel-strike detection.

16 November 2018 in Sensors
Verified
Journal Article
Open access
PDF file
JLJung Keun Lee
Jung Keun Lee
WJWoo Chang Jung
Woo Chang Jung
Local frame alignment between an inertial measurement unit (IMU) system and an optical motion capture system (MCS) is necessary to combine the two systems for motion analysis and to validate the accuracy of IMU-based motion data by using references obtained through the MCS. In this study, we propose a new quaternion-based local frame alignment method where equations of angular velocity transformation are used to determine the frame alignment orientation in the form of quaternion. The performance of the proposed method was compared with those of three other methods by using data with different angular velocities, noises, and alignment orientations. Furthermore, the effects of the following three factors on the estimation performance were investigated for the first time: (i) transformation concept, i.e., angular velocity transformation vs. angle transformation; (ii) orientation representations, i.e., quaternion vs. direction cosine matrix (DCM); and (iii) applied solvers, i.e., nonlinear least squares method vs. least squares method through pseudoinverse. Within our limited test data, we obtained the following results: (i) the methods using angular velocity transformation were better than the method using angle transformation; (ii) the quaternion is more suitable than the DCM; and (iii) the applied solvers were not critical in general. The proposed method performed the best among the four methods. We surmise that the fewer number of components and constraints of the quaternion in the proposed method compared to the number of components and constraints of the DCM-based methods may result in better accuracy. Owing to the high accuracy and easy setup, the proposed method can be effectively used for local frame alignment between an IMU and a motion capture system.