Cheng-Jung Yang

Prof. Cheng-Jung Yang

Program in Interdisciplinary Studies, National Sun Yat-sen University,
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 January 2023 in Sensors
Verified
Journal Article
Open access
PDF file
Cheng-Jung YangCheng-Jung Yang
Cheng-Jung Yang
WHWei-Kai Huang
Wei-Kai Huang
KLKeng-Pei Lin
Keng-Pei Lin
Fused deposition modeling (FDM) is a form of additive manufacturing where three-dimensional (3D) models are created by depositing melted thermoplastic polymer filaments in layers. Although FDM is a mature process, defects can occur during printing. Therefore, an image-based quality inspection method for 3D-printed objects of varying geometries was developed in this study. Transfer learning with pretrained models, which were used as feature extractors, was combined with ensemble learning, and the resulting model combinations were used to inspect the quality of FDM-printed objects. Model combinations with VGG16 and VGG19 had the highest accuracy in most situations. Furthermore, the classification accuracies of these model combinations were not significantly affected by differences in color. In summary, the combination of transfer learning with ensemble learning is an effective method for inspecting the quality of 3D-printed objects. It reduces time and material wastage and improves 3D printing quality.

24 August 2020 in International Journal of Energy Research
Verified
Journal Article
Closed access
PDF file
STSangeetha Thangavel
Sangeetha Thangavel
PCPo-Tuan Chen
Po-Tuan Chen
WYWei‐Mon Yan
Wei‐Mon Yan
Cheng-Jung YangCheng-Jung Yang
Cheng-Jung Yang
KHK. David Huang
K. David Huang

6 October 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Cheng-Jung YangCheng-Jung Yang
Cheng-Jung Yang
SWSin-Syuan Wu
Sin-Syuan Wu
The 3D printers integrated with fused filament fabrication (FFF) are highly valued worldwide because of their properties, which include fast proofing, compatibility with various materials, and low printing cost. The competitiveness of FFF can be enhanced by improving printing quality. However, due to the increasing sustainability issues worldwide, there is an urgent need to lower energy consumption. In this study, we focused on fan rate, printing speed, nozzle temperature, build plate temperature, and layer thickness as factors that directly impact the dimensional accuracy, carbon dioxide emissions, and printing cost of FFF printers. Several single-objective and multiobjective optimization tasks were performed using the Taguchi method and desirability approach to implement sustainable manufacturing decisions. In single-objective optimization, the inner width, outer width, material cost, and labor cost were most easily affected by the layer thickness. The outer length, carbon dioxide emissions, and electricity cost were significantly affected by the build plate temperature. In multiobjective optimization, a different set of printing parameters can be used to optimize dimensional accuracy, carbon dioxide emissions, material cost, labor cost, and electricity cost. This study helps users to obtain optimal solutions under different optimization requirements to cope with diverse manufacturing characteristics.


4 August 2020 in RSC Advances
Verified
Journal Article
Open access
PDF file
TSThangavel Sangeetha
Thangavel Sangeetha
WYWei-Mon Yan
Wei-Mon Yan
PCPo-Tuan Chen
Po-Tuan Chen
Cheng-Jung YangCheng-Jung Yang
Cheng-Jung Yang
KHK. David Huang
K. David Huang
Zinc–air flow fuel cells utilizing zinc particles as fuel possess the potential to evolve as efficient distributed grid generators. In this research study, electrochemical impedance analysis was employed to determine the optimum design and operational parameters for the feasible maneuver and enhanced energy generation from zinc fuel cells. Polarization resistance (Rp), ohmic resistance (Rs), and mass transfer resistance (Rm) were used as the indicators for determination of the optimum parameters of fuel cell performance. Experimental conditions optimized from previous studies like potassium hydroxide electrolyte with temperature of 25 °C and concentration of 40 wt% zinc powder quantity of 20 g, electrode reaction surface area of 48 cm2 were followed in the fuel cells used in the present study. Parameters like collector plate material, air flow velocity and cell operating temperature were augmented and finally were all implemented in the fuel cell and operated. Plain nickel or nickel-plated copper were both advantageous as collector plate materials whereas an air flow velocity ranging from 1–3 m s−1 and a cell operating temperature of 25 °C to 45 °C were beneficial for the stability and performance of the zinc fuel cells. Finally, based on the optimized parameters obtained from the above experiments, performance tests of zinc fuel cells were investigated. The maximum power produced was 16.5 W, along with a corresponding voltage of 0.8 V, maximum current density of 430 mA cm−2 and peak power density of 364.6 mW cm−2. Thus it can be concluded that the fuel cells designed and operated in this study were capable for feasible and efficient future applications.

12 February 2020 in International Journal of Energy Research
Verified
Journal Article
Closed access
PDF file
STSANGEETHA THANGAVEL
SANGEETHA THANGAVEL
Cheng-Jung YangCheng-Jung Yang
Cheng-Jung Yang
PCPo-Tuan Chen
Po-Tuan Chen
WYWei‐Mon Yan
Wei‐Mon Yan
KHK. David Huang
K. David Huang