The proper design of protective structures may start from improving the characteristics of soils. In order to obtain reasonable safety criteria, several research studies have recently been dedicated to enhancing complex civil engineering structural systems with the use of nanotechnology. Thus, the following paper investigates the effect of nanospheres, including nanosilica (nano‐SiO₂) and nano zinc oxide (nano‐ZnO), on lime‐stabilized high‐plasticity clay soil. For this purpose, unconfined compressive strength (UCS) and California bearing ratio (CBR) tests were performed on samples. The results showed that the use of the selected nanospheres greatly increased the UCS of the samples compared to untreated soil. The UCS value of samples containing 6% lime and 1.5% nano‐ZnO after 28 days of treatment increased by 5‐fold compared to the UCS of untreated samples. In addition, the samples containing 6% lime and 2% nano‐SiO₂, with similar curing conditions, experienced a 5.3‐fold increase in their UCS value compared to the untreated samples. These compounds were considered as the optimal amounts and showed the highest mechanical strength in both UCS and CBR tests. The same trend was achieved in the CBR test, in which the CBR value for the optimal mixtures containing nano‐ZnO and nano‐SiO₂ was 14.8 and 16.6 times higher than that of high‐plasticity clay soil, respectively. Finally, the results obtained from scanning electron microscopy (SEM) analysis revealed that the nanospheres caused a dense and compact matrix to form in the soil, which led to the enhancement of the mechanical strength of the treated samples.

By application of the limit equilibrium method associated with Coulomb failure mechanism, the effect of variation of undrained shear strength with depth on seismic bearing capacity was evaluated. The approach followed in this study to take into account seismic forces is pseudo-static. It is also assumed that the occurrence of an earthquake does not have any effects on the values of soil cohesion. Two different marine soil deposits exhibiting linear and bilinear variations of undrained shear strength with depth were considered. The undrained bearing capacity factor has been computed as a function of dimensionless parameters of λ₁B/c₀, λ₂B/c₀, and Z_t/B. The results of this paper have been compared with solutions reported in the literature, and the consistency of the results confirmed the ability of Coulomb failure mechanism and its corresponding limit equilibrium method formulation in static condition. Furthermore, the pseudo-static bearing capacity of shallow foundations on heterogeneous marine deposit is addressed. Finally the results of this study presented in the form of table and design charts.