Predicting the wideband radiation of the high-power interconnection cable network within the system is necessary for the electromagnetic compatibility design verification of power electronic systems, and it is urgent to accurately model and analyze its radiation characteristics. The current modeling methods, such as the equivalent dipole method, have numerous constraints, making it difficult to effectively analyze multi-core cable network with connectors, transmission lines of arbitrary arrangement, and large-scale branches. To address this problem, this paper proposes a hybrid modeling method, which integrates multi-conductor transmission line (MTL) equations, dipole radiation theory, and multi-port network theory. Firstly, by using multi-port network theory, this method creates an equivalent circuit for the connection by extracting the S-parameters of the connector. Then, a cascaded transmission model is established using MTL equations, which can analyze the radiation characteristics of various interconnecting cable networks between electromechanical devices, including both straight and bent configurations. Next, the current distribution along the cable network is solved through termination conditions. Furthermore, dipole array radiation theory is used to calculate the radiated field of the complicated cable network with connectors, large-scale branches, and transmission lines of arbitrary layout. Finally, some examples are used to validate the validity and accuracy of this method.
As more and more new power electronics with high switching frequencies are used in power-electronic equipment on ships and other platforms, the wideband radiation that power-electronic equipment gives off could affect sensitive equipment on the platform. Therefore, it is crucial to accurately model and characterize its wideband radiation properties to predict the wideband field distribution near such equipment. The traditional equivalent dipole method is commonly used to model power-electronic equipment at a single frequency. It is difficult to apply this method to wideband applications, and the precision of equivalent dipole array modeling at each frequency is insufficient. Additionally, acquiring the near-field phase data necessary for comparable modeling through practical measurement is frequently difficult. To solve the above problems, this paper proposes an equivalent dipole hybrid modeling method for power-electronic equipment’s broadband radiation characteristics. Starting with the near-field data at finite frequency points in a wideband, the method employs a global optimization algorithm to find the best equivalent dipole array, which characterizes the power-electronic equipment’s radiation characteristics. Furthermore, the interpolation technique is used to predict the wideband radiation properties of power-electronic equipment. Finally, test and numerical examples demonstrate the method’s accuracy and effectiveness.
With the development of pulse technology, reinforced concrete buildings are exposed to increasingly complex high-power electromagnetic pulse (EMP) environments, posing risks of functional degradation or destruction of indoor electronic equipment and systems. Therefore, it is imperative to assess the internal fields of buildings under EMP irradiation. The challenge lies in the multi-scale characteristics of reinforced concrete buildings, where fine grids are required for the accurate modelling of rebar, thereby consuming substantial computing resources. To address this challenge, this paper proposes a fast calculation method of the time–domain coupling characteristics between buildings and EMPs based on the electromagnetic parameter equivalence of reinforced concrete walls. The method first calculates the equivalent electromagnetic parameters from the S-parameters of the walls, which are then fitted into polynomial rational functions. Then, the auxiliary differential equation finite-difference time–domain (ADE-FDTD) method is used to analyze the time–domain coupling characteristics of reinforced concrete walls and buildings under EMP irradiation. The results show that the proposed method significantly enhances computational efficiency while maintaining high accuracy. Specifically, for a large two-story reinforced concrete building, the method achieves a 3.2-fold increase in computational speed and a 4.3-fold reduction in memory usage compared to conventional commercial software (CST Studio Suite 2022). This approach provides an effective solution for simulating the coupling characteristics between large reinforced concrete buildings and external EMPs.