Eric G Allain

Dr. Eric G Allain


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2018 in Metals
Verified
Journal Article
Open access
PDF file
Ndue KANARINdue KANARI
Ndue KANARI
NMNour -Eddine MENAD
Nour -Eddine MENAD
EOEtleva Ostrosi
Etleva Ostrosi
SSSeit Shallari
Seit Shallari
FDFrederic DIOT
Frederic DIOT
JYJacques Yvon
Jacques Yvon
Iron sulfate, in particular FeSO4·7H2O, is derived from titanium dioxide production and the steel pickling process. Regarding TiO2 manufacturing, the amount of the resultant FeSO4·7H2O can be as high as 6 tons per ton of produced TiO2, leading to a huge amount of ferrous sulfate heptahydrate, which is considered an environmental and economic concern for the titanium dioxide industry in European countries. The present paper focuses on the thermal treatment of ferrous sulfate (heptahydrate and monohydrate) samples under different conditions. Nonisothermal thermogravimetric (TG) analysis was used to study the behavior of iron sulfate samples at temperatures of up to 1000 °C in Cl2 + O2, O2, and N2 atmospheres. Results showed that the dehydration of iron sulfate heptahydrate in nitrogen started at room temperature and resulted in iron sulfate tetrahydrate (FeSO4·4H2O). The ferrous sulfate monohydrate (FeSO4·H2O) was formed at temperatures close to 150 °C, while the anhydrous ferrous sulfate (FeSO4) was obtained when the samples were heated in nitrogen at over 225 °C. The kinetic features of FeSO4 decomposition into Fe2O3 were revealed under isothermal conditions at temperatures ranging from 500 to 575 °C. The decomposition of iron sulfate was characterized by an apparent activation energy of around 250 kJ/mol, indicating a significant temperature effect on the decomposition process. The obtained powder iron oxide could be directed to the agglomeration unit of iron and the steelmaking process.

17 May 2019 in Materials
Verified
Journal Article
Open access
PDF file
Ndue KANARINdue KANARI
Ndue KANARI
EAEric G Allain
Eric G Allain
SSSeit Shallari
Seit Shallari
FDFrederic DIOT
Frederic DIOT
SDSebastien Diliberto
Sebastien Diliberto
JYJacques Yvon
Jacques Yvon
Development of our modern society requests a number of critical and strategic elements (platinum group metals, In, Ga, Ge…) and high value added elements (Au, Ag, Se, Te, Ni…) which are often concentrated in by-products during the extraction of base metals (Cu, Pb, Zn…). Further, recycling of end-of-life materials employed in high technology, renewable energy and transport by conventional extractive processes also leads to the concentration of such chemical elements and their compounds in metallurgical by-products and/or co-products. One of these materials, copper anode slime (CAS), derived from a copper electrolytic refining factory, was used for this study. The sample was subjected to isothermal treatment from 225 to 770 °C under air atmosphere and the reaction products were systematically analyzed by scanning electron microscopy through energy dispersive spectroscopy (SEM-EDS) and X-ray diffraction (XRD) to investigate the thermal behavior of the treated sample. The main components of the anode slime (CuAgSe, Cu2-xSeyS1-y, Ag3AuSe2) react with oxygen, producing mostly copper and selenium oxides as well as Ag-Au alloys as final products at temperatures higher than 500 °C. Selenium dioxide (SeO2) is volatilized and recovered in pure state by cooling the gaseous phase, whilst copper(II) oxide, silver, gold and tellurium remain in the treatment residue.

9 October 2020 in Materials
Verified
Journal Article
Open access
PDF file
Ndue KANARINdue KANARI
Ndue KANARI
EAEric G Allain
Eric G Allain
Lev FilippovLev Filippov
Lev Filippov
SSSeit Shallari
Seit Shallari
FDFrederic DIOT
Frederic DIOT
FPFabrice Patisson
Fabrice Patisson
The most economically important iron-chromium bearing minerals is chromite. In natural deposits, iron(II) is frequently substituted by magnesium(II) while chromium(III) is replaced by aluminum(III) and/or iron(III) forming a complex chromium bearing material. The majority of mined chromite is intended for the production of ferrochrome which requires a chromite concentrate with high chromium-to-iron ratio. Found mostly in the spinel chromite structure, iron cannot be removed by physical mineral processing methods. In this frame, the present work deals with the reaction of chlorine and chlorine+oxygen with selected samples of chromite concentrates for assessing the reactivity of their components towards chlorinating atmosphere, allowing the preferential removal of iron, hence meeting the chromite metallurgical grade requirements. Isothermal thermogravimetric analysis was used as a reliable approach for the kinetic reactivity investigation. Results indicated a wide difference in the thermal behavior of chromite constituents in a chlorinating atmosphere when considering their respective values of apparent activation energy oscillating from about 60 to 300 kJ/mol as a function of the sample reacted fraction. During the chromite treatment by chlorine in presence of oxygen, chromium was recovered as liquid chromyl chloride by condensation of the reaction gas phase.

24 July 2021 in Materials
Verified
Journal Article
Open access
PDF file
Ndue KANARINdue KANARI
Ndue KANARI
NMNour -Eddine MENAD
Nour -Eddine MENAD
Lev FilippovLev Filippov
Lev Filippov
SSSeit Shallari
Seit Shallari
EAEric G Allain
Eric G Allain
JYJacques Yvon
Jacques Yvon
The mass production of synthetic plastics began in the last century and today they have become one of the most abundant man-made materials. The disposal or the beneficiation of end-of-life plastics represent a great challenge for society especially in the case of polyvinyl chloride (PVC). This study is focused on the use of PVC waste as a useful agent for the direct reduction of hematite (Fe2O3) after a thermal treatment at 300 °C for removing the chlorine contained in PVC. Thermal reduction tests were conducted from 600 °C to 1100 °C with (Fe2O3 + PVC + clay) pellet mixtures in which clay was used as plasticizing and binder agent of the pellets. The starting samples and treatment residues were analyzed by scanning electron microscopy through energy dispersive spectroscopy (SEM-EDS) and X-ray diffraction (XRD) to monitor the chemical behavior and reactivity of the pellet constituents during their thermal treatment. The stepwise reduction of hematite up to metallic iron was achieved at temperatures approaching 1000 °C, confirming the capability of using PVC waste for the direct reduction of iron oxides.

19 June 2019 in Materials
Verified
Journal Article
Open access
PDF file
Ndue KANARINdue KANARI
Ndue KANARI
EOEtleva Ostrosi
Etleva Ostrosi
CDCécile Diliberto
Cécile Diliberto
IFInna Filippova
Inna Filippova
SSSeit Shallari
Seit Shallari
JYJacques Yvon
Jacques Yvon
The investigation presented here features the design of a cleaner and greener chemical process for the conversion of industrial wastes into super-oxidizing materials. The waste of interest is the iron sulfate heptahydrate (FeSO4·7H2O) mainly generated through the sulfate route used for titanium dioxide industrial production. The products of this transformation process are alkali ferrates (A2FeO4, A = Na, K) containing iron in its hexavalent state and considered as powerful oxidants characterized by properties useful for cleaning waters, wastewaters, and industrial effluents. The proposed process includes two steps: (i) The first step consisting of the pre-mixing of two solids (AOH with FeSO4·xH2O) in a rotary reactor allowing the coating of iron sulfate in the alkali hydroxides through solid–solid reactions; and (ii) the second step involves the synthesis of alkali ferrates in a fluidized bed by oxidation of the single solid obtained in the first step in diluted chlorine. The chemical synthesis of alkali ferrates can be carried out within a timeframe of a few minutes. The usage of a fluidized bed enhanced the energy and mass transfer allowing a quasi-complete control of the ferrate synthesis process. The alkali ferrate synthesis process described here possesses many characteristics aligned with the principles of the “green chemistry”.

21 September 2020 in Materials
Verified
Journal Article
Open access
PDF file
Ndue KANARINdue KANARI
Ndue KANARI
EAEric G Allain
Eric G Allain
SSSeit Shallari
Seit Shallari
FDFrederic DIOT
Frederic DIOT
SDSébastien Diliberto
Sébastien Diliberto
JYJacques Yvon
Jacques Yvon
During the treatment of copper anode slime (CAS) under an air atmosphere, several aspects of the interactions of its main components (CuAgSe, Cu2−xSeyS1−y, Ag3AuSe2) with oxygen were described in Part I. As a comparative and complementary study, this work deals with the thermal behavior of CAS under air in the presence of polyvinyl chloride (PVC) between 195 and 770 °C. The preliminary thermal treatment of an e-waste sample containing brominated substances was also performed. The reaction products were systematically analyzed by scanning electron microscopy through energy-dispersive spectroscopy (SEM-EDS) and X-ray diffraction (XRD) to investigate the thermal behaviors of the studied samples in a halogenated medium. At low temperatures, the copper, silver and selenium compounds of the CAS reacted with the HCl, issued from PVC degradation, leading to the formation of their respective chlorides. Bromides of valuable metals (Cu, Pb, Sn…) were synthesized during the e-waste treatment at 500 °C and they were distributed between the solid residue and gaseous phase. The data obtained give an insight into the reactivity of several metals towards halogenated substances, which may be valuable information for conducting the extraction and recycling of targeted elements from industrial by-products and end-of-life materials by a thermochemical route.