Jintao Ju

Dr. Jintao Ju

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 May 2016 in Energies
Verified
Journal Article
Open access
PDF file
HZHuangqiu Zhu
Huangqiu Zhu
SDShuling Ding
Shuling Ding
JJJintao Ju
Jintao Ju
In order to overcome the shortcoming of magnetic bearings whereby general mathematical models of the radial suspension forces cannot be accurately established, a mathematical model considering the edge effect is set up. The configuration, operation principle and flux distribution features of a three-pole radial hybrid magnetic bearing (HMB) are analyzed in this paper. The magnetic field division method is employed to calculate the permeance of different regions around the end portion of poles. The total permeance of a single pole is composed of the permeance of the regions. Then, an accurate mathematical model of the radial suspension forces considering the edge effect is deduced by the equivalent magnetic circuit method. From the modeling procedures, it can be seen that the edge effect calculation is only related to the configuration and parameters of the magnetic poles, and is isolated with the other configurations and parameters of the three-pole radial HMB, therefore, the mathematical model is proved universal for calculating different suspension forces of hybrid magnetic bearings. A finite element analysis (FEA) simulation and three-pole radial HMB experiments are performed. The error between the theoretical calculation values and the FEA simulation values of the suspension forces is less than 5%, and the error between theoretical calculation value and experimental value of suspension forces is less than 7%. The comparison between the results of the theoretical calculation, FEA simulation and experiments has verified that the established mathematical model can accurately calculate the suspension forces.

2 September 2016 in Energies
Verified
Journal Article
Open access
PDF file
JJJintao Ju
Jintao Ju
HZHuangqiu Zhu
Huangqiu Zhu
The radial stator of three-pole radial-axial hybrid magnetic bearings (HMB) has three magnetic poles and the three magnetic poles are driven by a three-phase converter, so the three-pole radial-axial HMB has the advantages of compact structure, low cost, low power consumption and so on. However, as the sum of three-phase current is zero and the three radial magnetic poles are asymmetric, the relationship between the radial suspension force and the control current is nonlinear. In this paper, firstly a mathematical model of three-pole radial-axial HMB is built based on the equivalent magnetic circuit method. The radial force-current characteristics are then analyzed based on the non-linearized model. The calculation, finite element method (FEM) and experimental results show that the suspension force on the x-axis is a quadratic function of the control current, but the suspension force on the y-axis is linear with control current. Besides, the suspension forces on the two radial axes are coupled with each other. Then, in order to decrease the nonlinearity and coupling of radial force-current characteristics, the six-pole radial-axial HMB is proposed based on the above analyses. The radial force-current characteristics of the six-pole radial-axial HMB are also analyzed based on the non-linearitzed model and are validated by 3-D FEM analysis. The calculation and FEM results have shown that the radial force-current relationship of a six-pole radial-axial HMB is linear and there is no coupling between the two radial axes.

24 September 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
BMBo Mao
Bo Mao
GLGai Liu
Gai Liu
HZHuangqiu Zhu
Huangqiu Zhu
JJJintao Ju
Jintao Ju
A radial displacement sensorless control method of a permanent magnet assisted bearingless synchronous reluctance motor (PMa-BSynRM) based on square wave voltage injection (SWVI) is proposed to replace the sensor and enhance system reliability. First, the inductance expression of the PMa-BSynRM winding is derived based on the magnetic potential and magnetic permeability method when the rotor is eccentric. Then, a SWVI method of PMa-BSynRM is proposed. The high-frequency (HF) voltage signal is injected into the static coordinate system of the torque winding, and the induced current generated before and after the HF injection period is sampled on the suspension force winding. Through mathematical calculations, the radial displacement information of the rotor can be obtained. The phase-locked loop (PLL) is used as a rotor displacement observer to estimate rotor radial displacement. Considering that the observer based on fixed bandwidth design is difficult to achieve good control performance in a wide speed domain, a neural network algorithm is introduced to optimize the observer parameters online. Finally, the proposed method is validated on the experimental platform of the PMa-BSynRM. The experimental results demonstrate that the proposed radial displacement sensorless control method based on SWVI can achieve stable suspension operation with exceptional precision.

1 January 2023 in Energies
Verified
Journal Article
Open access
PDF file
JJJintao Ju
Jintao Ju
PXPeng Xu
Peng Xu
SLShuqing Li
Shuqing Li
TXTong Xu
Tong Xu
FJFangming Ju
Fangming Ju
JDJiahui Du
Jiahui Du
The six-pole radial–axial hybrid magnetic bearing (RAHMB) has the advantages of small space and low power consumption, making it suitable for flywheel batteries. The bearing capacity and the volume are the main specifications of magnetic bearings that should be considered comprehensively. In this work, the six-pole RAHMB was used in a horizontal flywheel battery. As the axial bearing capacity is relatively smaller than the radial bearing capacity, a design method with independent radial and axial bearing capacity is proposed, and the parameters are optimized to minimize the volume. The mathematical model of six-pole RAHMB was derived from the equivalent magnetic circuit method. The relationships between bearing capacity, biased flux density, saturation flux density and the section area of magnetic poles were analyzed. The basic principle of the design method with independent radial and axial bearing capacity is to determine which five of the variables are preferred. According to the design method, one radial or axial biased flux density should be optimized to minimize the volume, and the genetic algorithm (GA) was adopted to search for the optimal value. The structural parameters were designed based on the optimized value of biased flux density. The total volume of the six-pole RAHMB was reduced by 24%. A 3D finite element (FE) model was built. The analysis results and experimental results show that the proposed design and the optimization method are feasible and valid.

18 May 2016 in Energies
Verified
Journal Article
Open access
PDF file
HZHuangqiu Zhu
Huangqiu Zhu
JYJianfei Yuan
Jianfei Yuan
JJJintao Ju
Jintao Ju
At present, because of their advantages of simple structure, low cost, low power consumption and high efficiency, single winding bearingless permanent magnet synchronous motors (SBPMSMs) have become one of the research hotspots in the bearingless technology field. However, a high motional-electromotive force (EMF) is generated by rotor rotation in the single winding, which already has side-effects on the normal suspension force current, and the suspension force response can be delayed. Because the method of double torque current inverse injection in the symmetrical winding allows the motional-EMFs of the corresponding phase windings to offset each other in the opposite direction, with no adverse effects on original performance, a T-shaped single winding configuration is proposed to realize precisely that effect. In this paper, the analytical expressions of the radial suspension force and torque are deduced and the motional-EMF and performance are analyzed by finite element method using the Ansys-Maxwell software. In addition, a suspension force vector closed loop control strategy is proposed to improve the suspension performance. The complete control strategy of torque and suspension force is designed based on the above motor winding configuration. Finite element analysis (FEA) is used to verify the T-shaped winding structure. The control strategy is demonstrated by software (MATLAB) simulation and an experimental prototype. These results show that the winding structure and the control strategy can achieve the desired effect, improving the radial suspension force.

24 October 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HLHaiming Li
Haiming Li
HZHuangqiu Zhu
Huangqiu Zhu
JJJintao Ju
Jintao Ju
To address the strong coupling and nonlinearity issues in the hybrid magnetic bearing (HMB) of magnetic levitation electric spindles, a deep fuzzy neural network inverse system (DFNNIS) decoupling strategy is proposed for the six-pole radial-axial HMB. First, the structure and principle of HMB are introduced, and its mathematical model of suspension force is derived. Second, the displacement and current data are collected using the HMB mathematical model and normalized. The inverse system model is obtained by training with the deep fuzzy neural network. According to the right inverse principle of the inverse system, the inverse system model is connected in series with the original system, thereby achieving decoupling of the HMB suspension force. Finally, through the simulation and experiments of rotor suspension and anti-interference, it is proven that the convergence speed and anti-interference performance of the DFNNIS decoupling model are superior to those of the traditional neural network inverse system model.