A rigid, high temperature-resistant aromatic polymer, poly(1,1′-biphenyl)-6,8a-dihydroacenaphthylene-1(2H)-one (BDA) comprising acenaphthenequinone and biphenyl was successfully synthesized by superacid catalyzed polymerization. BDA has a high decomposition temperature (Td = 520 °C) that renders it a viable candidate for carbon molecular sieve membranes (CMSM) formation. BDA precursor pyrolysis at 600 °C (BDA-P600) leads to a carbon turbostratic structure formation with graphene-like amorphous strands in a matrix with micropores and ultramicropores, resulting in a carbon structure with higher diffusion and higher selectivity than dense BDA. When the BDA pyrolysis temperature is raised to 700 °C (BDA-P700), the average stacking number of carbon layers N increases, along with an increase in the crystallite thickness stacking Lc, and layer plane size La, leading to a more compact structure. Pure gas permeability coefficients P are between 3 and 5 times larger for BDA-P600 compared to the BDA precursors. On the other hand, there is a P decrease between 10 and 50% for O2 and CO2 between CMSM BDA-P600 and BDA-P700, while the large kinetic diameter gases N2 and CH4 show a large decrease in permeability of 44 and 67%, respectively. It was found that the BDA-P700 WAXD results show the emergence of a new peak at 2θ = 43.6° (2.1 Å), which effectively hinders the diffusion of gases such O2, N2, and CH4. This behavior has been attributed to the formation of new micropores that become increasingly compact at higher pyrolysis temperatures. As a result, the CMSM derived from BDA precursors pyrolyzed at 700 °C (BDA-P700) show exceptional O2/N2 gas separation performance, significantly surpassing baseline trade-off limits.
Las membranas de Carbón de Malla Molecular (MCMM) presentan excelentes propiedades químicas y térmicas, superan fácilmente la típica compensación entre permeabilidad y selectividad en procesos de separación de gases. Sin embargo, el rendimiento y los mecanismos de transporte involucrados en la separación no están muy claros. Los principales polímeros precursores para la síntesis de MCMM están limitados a resinas fenólicas, poliimidas y estructuras altamente aromáticas. Lo anterior, abre la oportunidad para explorar nuevos materiales poliméricos como precursores. Por ejemplo, las diferentes variantes de los poli(oxindoliliden arileno)s, POXINARs. Esta investigación se enfoca en evaluar el rendimiento de separación de las MCMM modificadas estructuralmente con grupos para-fluorofenilo. Se sintetizaron MCMM a partir de los precursores poli(2-oxo-3-bifenilen)indol [POBI-H], y poli(2-oxo-3-bifenilen-1-(4-fluoro)fenilindol [POBI-FPh]. La caracterización se realizó mediante microscopia de infrarrojo y análisis termogravimétrico y, finalmente, se evaluaron las propiedades de transporte de gases puros a temperaturas de 30, 40 y 45 °C y una diferencia de presión de 2 atm.
16 February 2026 in Metodologías en Ingeniería Desarrollo en la Educación, Administración, Humanidades y Social
Composite materials with polysulfone (PSF), microcrystalline cellulose (CMC) extracted from sargassum, and iron nanoparticles (NPFe) at a ratio of 1:33 (additive: PSF of PSF-CMC, PSF-NPFe, PSF-CMC-NPFe, and PSF were evaluated for the adsorption of indigo blue (AI) dye at an initial concentration of 50 mg/L. The materials were prepared with (TT) and without heat treatment (STT). The adsorption tests were carried out using 50 mL of solution adjusted to pH 6.0, with a stirring speed of 125 rpm, an adsorbent mass of 0.25 g, and a contact time of 210 min. The adsorption efficiency was evaluated using kinetic and isothermal models. The maximum adsorption capacity of the STT materials was 7.15, 6.75, 5.72, and 5.96 mg/g for PSF, PSF-CMC, PSF-NPFe, and PSF-CMC-NPFe STT, respectively, and 4.22, 6.14, 7.06, and 6.40 mg/g for TT, respectively. All materials exhibit pseudo-second-order adsorption kinetics. The Langmuir model fitted all materials adequately, indicating that the adsorption process was dominated by monolayer chemisorption.