The roll-out of various emerging wireless services has triggered the need for the sixth-generation (6G) wireless networks to provide functions of target sensing, intelligent computing and information communication over the same radio spectrum. In this paper, we provide a unified framework integrating sensing, computing, and communication to optimize limited system resource for 6G wireless networks. In particular, two typical joint beamforming design algorithms are derived based on multi-objective optimization problems (MOOP) with the goals of the weighted overall performance maximization and the total transmit power minimization, respectively. Extensive simulation results validate the effectiveness of the proposed algorithms. Moreover, the impacts of key system parameters are revealed to provide useful insights for the design of integrated sensing, computing, and communication (ISCC).

In this paper, we investigate the issue of integrated sensing, computation and communication (SCC) in beyond fifthgeneration (B5G) cellular internet of things (IoT) networks. According to the characteristics of B5G cellular IoT, a comprehensive design framework integrating SCC is put forward for massive IoT. For sensing, highly accurate sensed information at IoT devices are sent to the base station (BS) by using non-orthogonal communication over wireless multiple access channels. Meanwhile, for computation, a novel technique, namely over-the-air computation (AirComp), is adopted to substantially reduce the latency of massive data aggregation via exploiting the superposition property of wireless multiple access channels. To coordinate the co-channel interference for enhancing the overall performance of B5G cellular IoT integrating SCC, two joint beamforming design algorithms are proposed from the perspectives of the computation error minimization and the weighted sum-rate maximization, respectively. Finally, extensive simulation results validate the effectiveness of the proposed algorithms for B5G cellular IoT over the baseline ones.

To jointly address the critical issues of the sixth-generation (6G) cellular internet of things (IoT), i.e., energy supply, data aggregation, and information transmission, we design a framework integrating energy, computation and communication (ECC). Firstly, the base station (BS) charges massive IoT devices simultaneously via wireless power transfer (WPT) in the downlink. Then, IoT devices with the harvested energy carry out the computation task and the communication task in the uplink over the same spectrum. To improve the overall performance of ECC, we propose a joint beamforming design algorithm for the BS and the IoT devices. Finally, simulation results validate the effectiveness of the proposed algorithm in 6G cellular IoT.

In this paper, we study the resource allocation design for non-orthogonal multiple access (NOMA)-based cellular massive Internet-of-Things (IoT) enabled with simultaneous wireless information and power transfer (SWIPT). The design is formulated as a non-convex optimization problem, which takes into account practical and adverse factors, e.g., the channel uncertainty during channel state information (CSI) acquisition, the non-linear receiver during energy harvesting (EH) and the imperfect successive information cancellation (SIC) during the information decoding (ID). The originally harmful co-channel interference in massive access is coordinated to strike a balance between efficient information transmission and efficient energy harvesting via spatial beamforming. Subsequently, two robust beamforming algorithms are designed from the aspects of the weighted sum rate maximization and the total power consumption minimization, respectively. It is found that overall performance can be improved by adding BS antennas due to more array gains. Moreover, it is proved that the proposed algorithms can effectively alleviate the influence of adverse practical conditions and achieve the best performance compared to the baseline ones, which demonstrates the effectiveness and robustness of proposed algorithms for cellular massive IoT.

Low earth orbit (LEO) satellite internet of things (IoT) is a promising way achieving global Internet of Everything, and thus has been widely recognized as an important component of sixth-generation (6G) wireless networks. Yet, due to high-speed movement of the LEO satellite, it is challenging to acquire timely channel state information (CSI) and design effective multibeam precoding for various IoT applications. To this end, this paper provides a deep learning (DL)-based joint channel prediction and multibeam precoding scheme under adverse environments, e.g., high Doppler shift, long propagation delay, and low satellite payload. Specifically, this paper first designs a DL-based channel prediction scheme by using convolutional neural networks (CNN) and long short term memory (LSTM), which predicts the CSI of current time slot according to that of previous time slots. With the predicted CSI, this paper designs a DL-based robust multibeam precoding scheme by using a channel augmentation method based on variational auto-encoder (VAE). Finally, extensive simulation results confirm the effectiveness and robustness of the proposed scheme in LEO satellite IoT.

In this paper, we investigate the issue of satellite-terrestrial computing in the sixth generation (6G) wireless networks, where multiple terrestrial base stations (BSs) and low earth orbit (LEO) satellites collaboratively provide edge computing services to ground user equipments (GUEs) and space user equipments (SUEs) over the world. In particular, we design a complete process of satellite-terrestrial computing in terms of communication and computing according to the characteristics of 6G wireless networks. In order to minimize the weighted total energy consumption while ensuring delay requirements of computing tasks, an energy-efficient satellite-terrestrial computing algorithm is put forward by jointly optimizing offloading selection, beamforming design and resource allocation. Finally, both theoretical analysis and simulation results confirm fast convergence and superior performance of the proposed algorithm for satellite-terrestrial computing in 6G wireless networks.