The frequent launches of reusable launch vehicles are currently the primary approach to support large-scale space transportation, necessitating high reliability in recovery flights. This paper proposes a mission re-planning scheme to address throttling faults, which significantly affect the feasibility of powered landing. To quantify the influence of throttling capability, the concept of “controllable set (CS)” is introduced. The CS is defined as the collection of all feasible initial states that can achieve a successful powered landing and is computed using polyhedron approximation and convex optimization. Based on the CS, the physical feasibility of a power landing problem under deviations from the nominal conditions can be evaluated probabilistically. Besides, a deep neural network (DNN) is constructed to enhance the computational efficiency of the CS analysis, thereby meeting the requirements for online applications. Finally, an effective re-planning scheme is proposed to deal with throttling faults in recovery flight. This is achieved by adjusting the designed angle of attack during the endo-atmosphere unpowered descent phase and selecting the associated optimal handover conditions to initiate the powered landing. The optimal re-planning parameters are determined through a comprehensive investigation of the design space, leveraging probability-based CS analysis and computationally efficient DNN predictions. Simulations verify the accuracy of the CS computation algorithm and the effectiveness of the re-planning scheme under different fault conditions. The results indicate high feasibility probabilities of 99.97%, 98.12%, and 78.52% for maximum throttling capabilities at 65%, 75%, and 85% of nominal thrust magnitude, respectively.
A damped iterative explicit guidance (DIEG) algorithm is proposed to address the problem of the insufficient convergence of classical explicit guidance methods in the event of thrust drop faults in multistage rockets. Based on the iterative guidance mode (IGM) and powered explicit guidance (PEG), this method is enhanced in three aspects: (1) an accurate transversality condition is derived and applied in the dimension-reduction framework instead of using a simplified assumption; (2) the Gauss–Legendre quadrature formula (GLQF) is adopted to increase the accuracy of the method by addressing the issue of excessive errors in calculating thrust integration using linearization methods based on a small quantity assumption under fault conditions; and (3) a damping factor for solving the time-to-go is introduced to avoid the chattering phenomenon and enhance convergence. A numerical simulation was conducted in single- and multistage mission scenarios by gradually reducing the engine thrust to compare the performance of DIEG and PEG. The results show that DIEG has a much larger convergence range than PEG and has fuel optimality similar to that of the optimization method in most fault scenarios. Finally, the robustness of DIEG under various deviations is verified through Monte Carlo simulation.