The reduction and removal of surface oxides from GaAs substrates by atomic layer deposition (ALD) of ${\mathrm{Al}}_2{\mathrm{O}}_3$ and $\mathrm{Hf}{\mathrm{O}}_2$ are studied using in situ monochromatic x-ray photoelectron spectroscopy. Using the combination of in situ deposition and analysis techniques, the interfacial “self-cleaning” is shown to be oxidation state dependent as well as metal organic precursor dependent. Thermodynamics, charge balance, and oxygen coordination drive the removal of certain species of surface oxides while allowing others to remain. These factors suggest proper selection of surface treatments and ALD precursors can result in selective interfacial bonding arrangements.

Cleaving with a metal handle: Using adhesive tape to pull off monolayers of two-dimensional (2D) materials is now a well-established approach. However, the flakes tend to be micrometer scale, and the creation of multilayer stacks for device application can be challenging and time consuming. Shim et al. show that monolayers of a variety of 2D materials, including molybdenum disulfide and hexagonal boron nitride, can be cleaved from multilayers grown as 5-centimeter-diameter wafers. The multilayer is capped with a nickel layer, which can be used to pull off the entire grown stack. The bottom of the stack is again capped with nickel, and a second round of cleaving leaves the monolayer on the bottom nickel layer. The monolayers could be transferred to other surfaces, which allowed the authors to make field-effect transistors with high charge-carrier mobilities. Science , this issue p. 665