Emerging energy storage systems based on abundant and cost-effective materials are key to overcome the global energy and climate crisis of the 21st century.
Rechargeable magnesium batteries hold promise for providing high energy density, material sustainability, and safety features, attracting increasing research interest as post‐lithium batteries. With the progressive development of Mg electrolytes with enhanced (electro‐)chemical stability, tremendous efforts have been devoted to the exploration of high‐energy cathode materials. In this review, recent findings related to Mg cathode chemistry are summarized, focusing on the strategies that promote Mg2+ diffusion by targeting its interaction with the cathode hosts. The critical role of the cathode–electrolyte interfaces is elaborated, which remains largely unexplored in Mg systems. The approaches to optimization of cathode–electrolyte combinations to unlock the kinetic limitations of Mg2+ diffusion, enabling fast electrochemical processes of the cathodes, are highlighted. Furthermore, representative conversion chemistries and coordination chemistries that bypass bulk Mg2+ diffusion are discussed, with particular attention given to their key challenges and prospects. Finally, the hybrid systems that combine the fast kinetics of the monovalent cathode chemistries and high‐capacity Mg anodes are revisited, calling for further practical evaluation of this promising strategy. All in all, the aim is to provide fundamental insights into the cathode chemistry, which promotes the material development and interfacial regulations toward practical high‐performance Mg batteries.
The magnesium–sulfur battery represents a promising post-lithium system with potentially high energy density and improved safety. However, just as all metal–sulfur systems, it is plagued with the polysulfide shuttle leading to active material loss and surface layer formation on the anode. To gain further insights, the present study aims to shed light on the dissolution characteristics of sulfur and polysulfides in glyme-based electrolytes for magnesium–sulfur batteries. Therefore, operando UV/vis spectroscopy and imaging were applied to survey their concentration in solution and the separator coloration during galvanostatic cycling. The influence of conductive cathode additives (carbon black and titanium nitride) on the sulfur retention and cycling overpotentials were investigated. Thus, valuable insights into the system’s reversibility and the benefit of additional reaction sites are gained. On the basis of these findings, a reduction pathway is proposed with S8, S62–, and S42– being the present species in the electrolyte, while the dissolution of S82– and S3•– is unfavored. In addition, the evolution of the sulfur species concentration during an extended rest at open-circuit voltage was investigated, which revealed a three-staged self-discharge.
5 January 2025 in Angewandte Chemie International Edition
In the search for post-lithium battery systems, magnesium-sulfur batteries have attracted research attention in recent years due to their high potential energy density, raw material abundance, and low cost. Despite significant progress, the system still lacks cycling stability mainly associated with the ongoing parasitic reduction of sulfur at the anode surface, resulting in the loss of active materials and passivating surface layer formation on the anode. In addition to sulfur retention approaches on the cathode side, the protection of the reductive anode surface by an artificial solid electrolyte interphase (SEI) represents a promising approach, which contrarily does not impede the sulfur cathode kinetics. In this study, an organic coating approach based on ionomers and polymers is pursued to combine the desired properties of mechanical flexibility and high ionic conductivity while enabling a facile and energy-efficient preparation. Despite exhibiting higher polarization overpotentials in Mg-Mg cells, the charge overpotential in Mg-S cells was decreased by the coated anodes with the initial Coulombic efficiency being significantly increased. Consequently, the discharge capacity after 300 cycles applying an Aquivion/PVDF-coated Mg anode was twice that of a pristine Mg anode, indicating effective polysulfide repulsion from the Mg surface by the artificial SEI. This was backed by operando imaging during long-term OCV revealing a non-colored separator, i.e. mitigated self-discharge. While SEM, AFM, IR and XPS were applied to gain further insights into the surface morphology and composition, scalable coating techniques were investigated in addition to ensure practical relevance. Remarkably therein, the Mg anode preparation and all surface coatings were prepared under ambient conditions, which facilitates future electrode and cell assembly. Overall, this study highlights the important role of Mg anode coatings to improve the electrochemical performance of magnesium-sulfur batteries.