This study explores the biodegradation of polyhydroxybutyrate (PHB), polylactide (PLA), and their blends by 11 bacterial species (including Antarctic strains) and 6 fungal species. Aeration significantly enhanced PHB degradation by mold fungi (Aspergillus oryzae, Penicillium chrysogenum) and bacteria (Paenibacillus tundrae, Bacillus mycoides), while Aspergillus awamori was most effective under non-aerated conditions. For PLA, degradation peaked under aeration with Penicillium chrysogenum and Bacillus subtilis. PHB/PLA blends degraded slower overall, with maximum degradation under aeration by Penicillium chrysogenum, Pseudoarthrobacter sp., and Flavobacterium sp. Biodegradation was assessed via weight-loss measurements, X-ray diffraction (XRD), and thermal analysis. PHB samples showed reduced crystallinity and thermal stability linked to weight loss, while PLA samples exhibited varied changes, often with increased crystallinity and stability depending on the microorganism. PHB/PLA blends displayed variable crystallinity changes, generally decreasing under microbial action. The search for effective plastic-degrading microorganisms, particularly from extreme environments like Antarctica, is vital for addressing plastic pollution and advancing sustainable polymer degradation.
10 September 2026 in Physicochemical Mechanics of Materials
Structure, thermal and physicomechanical properties of thermoplastic biodegradable composites based on polyhydroxyalkanoates and hydroxyapatite were studied. Poly(3-hydroxybutyrate) and its copolymers with 3-hydroxyvalerate, 3-hydroxyhexanoate and 4-hydroxybutyrate were used as polymer matrices. The structural features of the materials were evaluated by X-ray diffraction analysis, thermal properties – by differential scanning calorimetry and thermogravimetric analysis, while physicomechanical characteristics – by strength and relative elongation during tension. It is found that the introduction of hydroxyapatite does not change the crystalline organization of polyhydroxyalkanoate matrices, but affects the degree of crystallinity of the composites. With an increase in the proportion of hydroxyapatite, the crystallization, melting and thermal decomposition temperatures, as well as the character of deformation fracture of materials change. It is found that a high content of hydroxyapatite reduces the strength and increases the brittleness of composites, while moderate filling allows us to maintain an acceptable balance of thermal and physicomechanical properties.
30 May 2026 in Chemistry, Technology and Application of Substances
Thermoplastic biodegradable composites based on polyhydroxyalkanoates (PHA) and hydroxyapatite (HA) were obtained by extrusion compounding. It was established that HA influences the crystallinity of PHA, as well as the mechanical and sorption properties of the composites, through its nucleation effect. The key factors determining the ability of PHA to form homogeneous, mechanically stable, and water-resistant composites were identified. A comprehensive analysis of the research results showed that composites based on poly(3- hydroxybutyrate-co-3-hydroxyhexanoate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) with HA are the most suitable for osteoplastic applications.