With recent advances in technologies such as those of semiconductors and actuators, easy-to-control compact actuators have been actively applied in various fields such as factory automation and precision machining. In the automobile industry, major manufacturers and venture companies are also concentrating on electric vehicle development. Ultra-compact mobility vehicles, which exhibit an excellent environmental performance and are highly convenient for short-distance movement, are becoming popular. However, owing to cabin space limitations, it is difficult to mount systems such as power steering for assisting steering operations, and such systems are currently not installed in most ultra-compact mobility vehicles. Our research group focused on a steer-by-wire system that does not require a physical connection between the steering wheel and the wheels. Using this system, the steering wheel can be installed without any constraints, and the cabin layout can be easily changed. The reaction torque applied to the steering wheel can be expected to provide an optimum steering feel to each driver by controlling the reaction-force-generating actuator output. Drivers with different heights and arm lengths were then grouped, and arm model calculation and electromyogram measurements obtained during steering operations were used to examine the muscle burden experienced during driving owing to differences in the drivers’ physiques.
This paper presents an analysis of the control law for a torque-vectoring system that actively distributes left and right drive torques to maximize the steady-state cornering performance of a rear-wheel drive race car. The control law allocates torque to the left and right vertical load distribution. Steady-state analysis results show that the maximum lateral acceleration could be improved by 7.8% by decreasing the maximum slip ratio and altering the point at which the yaw moment is trimmed compared to the existing passive system. Furthermore, the stability of the system is reduced, and measures to ensure stability are presented.
The application of mechanical products in many situations involves linear motion. The cylinder head of an internal combustion engine (ICE), a mechanical product, contains intake and exhaust valves. These valves open or close using the linear motion converted by the camshafts rotated by the engine. A typical engine is operated with a single cam profile; depending on the engine rotation, there are areas where the cam profiles do not match, resulting in a poor engine performance. An intake and exhaust system with an actuator can solve this problem. In a previous study on this system, the geometry and processing during manufacturing were complex. Therefore, in response, a linear actuator operated by Lorentz force with a coil as the mover was designed in this study. Through an electromagnetic field analysis using the finite element method, a three-phase alternating current was applied to the coil, assuming that it would be used as a power source for a general inverter. Consequently, the thrust obtained in the valve-actuation direction was 56.7 N, indicating improved axial thrust over the conventional model.
In this study, we explored the potential of a compact acoustic control system using giant magnetostrictive actuators (GMAs) for application in ultracompact electric vehicles (EVs), which face significant challenges in maintaining interior acoustic comfort due to their structural limitations. A fundamental investigation was conducted to clarify how differences in the internal structure of GMAs affect their vibration and acoustic output performances. Two GMA prototypes with different internal configurations (Model A, featuring two shorter rods and multiple permanent magnets, and Model B, featuring a single long rod) were evaluated through driving experiments. The acoustic signals were measured using a wall panel setup simulating in-cabin conditions. Both models exhibited an increase in sound pressure level with an increase in the applied voltage. However, the frequency response characteristics differed between the models. Model A performed better in the low-frequency range, whereas Model B maintained consistent performance across a broader frequency range. These findings provide essential insights into the design of space-saving and energy-efficient acoustic systems for next-generation mobility solutions.
1 January 2026 in Journal of the Japan Society of Applied Electromagnetics and Mechanics