Inertial microfluidics has become a popular topic in microfluidics research for its good performance in particle manipulation and its advantages of simple structure, high throughput, and freedom from an external field. Compared with traditional microfluidic devices, the flow field in inertial microfluidics is between Stokes state and turbulence, whereas the flow is still regarded as laminar. However, many mechanical effects induced by the inertial effect are difficult to observe in traditional microfluidics, making particle motion analysis in inertial microfluidics more complicated. In recent years, the inertial migration effect in straight and curved channels has been explored theoretically and experimentally to realize on-chip manipulation with extensive applications from the ordinary manipulation of particles to biochemical analysis. In this review, the latest theoretical achievements and force analyses of inertial microfluidics and its development process are introduced, and its applications in circulating tumor cells, exosomes, DNA, and other biological particles are summarized. Finally, the future development of inertial microfluidics is discussed. Owing to its special advantages in particle manipulation, inertial microfluidics will play a more important role in integrated biochips and biomolecule analysis.
This paper focuses on solving the problems of unknown measurement noise covariance and measurement outliers, which occurs in the vision/dual-IMU integrated attitude determination system. Although many adaptive filters and robust filters have been proposed to deal with the unknown measurement noise covariance or measurement outliers, most of them cannot handle both the unknown noise covariance and outliers. The adaptive filters assume no outliers in measurements and the robust filters assume accurate measurement noise covariance matrices. In this paper, we propose an adaptive and robust cubature Kalman filter, which achieves the adaptivity by estimating the measurement noise covariance through the variational Bayesian (VB) method, and achieves the robustness by suppressing the outliers based on the maximum correntropy criterion (MCC). The robustness and adaptivity of the proposed filter are verified through a typical tracking simulation example. Furthermore, the experimental results show that the proposed filter can obtain higher estimation accuracy than other filters in the vision/dual-IMU integrated system.
13 September 2021 in IEEE Transactions on Instrumentation and Measurement
This article presents a loosely coupled visual/inertial hybrid system for relative attitude determination on a moving platform. The inertial measurements are accomplished by two gyroscopes, of which the slave gyroscope removes the redundant motion of the platform from the total motion sensed by the master gyroscope. To correct integration drift error and compensate for the gyroscope biases, we fuse the inertial and visual measurements fused together through the error-state Kalman filter (ESKF). Furthermore, an improved ESKF is proposed by utilizing the variational Bayesian (VB) inference to adaptively estimate the process and measurement noise covariance. To realize direct estimation of the process noise covariance, a latent variable is introduced and inferred together with the noise covariances and error-state. The practical experimental setup is built up and experiments of two different motion trajectories are conducted. The ESKF, the cubature Kalman filter (CKF), the extended Kalman filter (EKF), the proposed filter, and the other two adaptive filters are implemented for comparison to verify the effectiveness of the proposed filter. The results demonstrate the proposed filter show superiority in reducing both the root mean square error (RMSE) and maximum error (ME) and improving the filter consistency.
In fringe projection profilometry, the relationship between phase and height is of the utmost significance to perform accurate measurement. To enhance accuracy and robustness, a calibration method is presented based on pattern geometric constraints. By analyzing the pattern distribution in the image coordinate, this method establishes a one-to-one mapping relationship between phase and height directly, and the lens distortion of the camera is considered and involved in the mathematical description, so as to eliminate error propagation. The (, ) coordinates are calculated from camera calibration with known height values. This method is practical for the reason that strict system constraints are not needed and the calibration procedure is efficient. Experiments including error evaluation and robustness evaluation are conducted to verify its accuracy and robustness, respectively. The results reveal that this method has the desired properties of high accuracy and strong robustness. These performances guarantee its flexibility under different circumstances.
In this paper, a novel hybrid method combining adaptive chirp mode pursuit (ACMP) with an adaptive multiscale Savitzky–Golay filter (AMSGF) based on adaptive moving average (AMA) is proposed for offline denoising micro-electromechanical system (MEMS) gyroscope signal. The denoising scheme includes preliminary denoising and further denoising. At the preliminary denoising stage, the original gyroscope signal is decomposed into signal modes one by one using ACMP with modified stopping criterion based on mutual information. Useful information is extracted while most noise is discarded in the residue at this stage. Then, AMSGF is proposed to further denoise the signal modes. Sample variance based on AMA is used to adjust the window size of AMSGF adaptively. Practical MEMS gyroscope signal denoising results under different motion conditions show the superior performance of the proposed method over empirical mode decomposition (EMD)-based denoising, discrete wavelet threshold denoising, and variational mode decomposition (VMD)-based denoising. Moreover, AMSGF is proven to gain a better denoising effect than some other common smoothing methods.
1 January 2018 in Review of Scientific Instruments
To determine the relative attitude between the objects on a moving base and the base reference system by a MEMS (Micro-Electro-Mechanical Systems) gyroscope, the motion information of the base is redundant, which must be removed from the gyroscope. Our strategy is to add an auxiliary gyroscope attached to the reference system. The master gyroscope is to sense the total motion, and the auxiliary gyroscope is to sense the motion of the moving base. By a generalized difference method, relative attitude in a non-inertial frame can be determined by dual gyroscopes. With the vision sensor suppressing accumulative drift of the MEMS gyroscope, the vision and dual MEMS gyroscope integration system is formed. Coordinate system definitions and spatial transform are executed in order to fuse inertial and visual data from different coordinate systems together. And a nonlinear filter algorithm, Cubature Kalman filter, is used to fuse slow visual data and fast inertial data together. A practical experimental setup is built up and used to validate feasibility and effectiveness of our proposed attitude determination system in the non-inertial frame on the moving base.