In this study, a thin film of silicon carbide (SiC) was deposited on a porous silicon (P-Si) substrate using pulsed laser deposition (PLD). The photo–electrochemical etching method with an Nd: YAG laser at 1064 nm wavelength and 900 mJ pulse energy and at a vacuum of 10−2 mbar P-Si was utilized to create a sufficiently high amount of surface area for SiC film deposition to achieve efficient SiC film growth on the P-Si substrate. X-ray diffraction (XRD) analysis was performed on the crystalline structure of SiC and showed high-intensity peaks at the (111) and (220) planes, indicating that the substrate–film interaction is substantial. Surface roughness particle topography was examined via atomic force microscopy (AFM), and a mean diameter equal to 72.83 nm was found. Field emission scanning electron microscopy (FESEM) was used to analyze surface morphology, and the pictures show spherical nanoparticles and a mud-sponge-like shape demonstrating significant nanoscale features. Photoluminescence and UV-Vis spectroscopy were utilized to investigate the optical properties, and two emission peaks were observed for the SiC and P-Si substrates, at 590 nm and 780 nm. The SiC/P-Si heterojunction photodetector exhibited rectification behavior in its dark I–V characteristics, indicating high junction quality. The spectral responsivity of the SiC/P-Si observed a peak responsivity of 0.0096 A/W at 365 nm with detectivity of 24.5 A/W Jones, and external quantum efficiency reached 340%. The response time indicates a rise time of 0.48 s and a fall time of 0.26 s. Repeatability was assured by the tight clustering of the data points, indicating the good reproducibility and stability of the SiC/P-Si deposition process. Linearity at low light levels verifies efficient photocarrier generation and separation, whereas a reverse saturation current at high intensities points to the maximum carrier generation capability of the device. Moreover, Raman spectroscopy and energy dispersive spectroscopy (EDS) analysis confirmed the structural quality and elemental composition of the SiC/P-Si film, further attesting to the uniformity and quality of the material produced. This hybrid material’s improved optoelectronic properties, achieved by combining the stability of SiC with the quantum confinement effects of P-Si, make it useful in advanced optoelectronic applications such as UV-Vis photodetectors.
This article discusses the successful deposition of gallium nitride (GaN) thin films on porous silicon (P-Si) substrates using pulsed laser deposition (PLD) techniques. The primary objective is to develop a high-efficiency GaN/P-Si heterojunction photodetector. Porous silicon was prepared through a photo-electrochemical etching process, resulting in a high-surface-area template that enhances both the adhesion of the GaN film and its optoelectronic properties. Surface morphology analysis, conducted using atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM), revealed a well-defined nanostructured GaN surface characterized by moderate roughness and a densely packed arrangement of nanoparticles. These features optimize photon absorption and facilitate efficient charge carrier transport. Energy-dispersive X-ray spectroscopy (EDS) further confirmed the successful integration of materials through elemental composition analysis.
23 July 2025 in International Journal of Nanoelectronics and Materials (IJNeaM)
Successfully deposited Indium gallium nitride (InGaN) thin films onto porous silicon (P-Si) substrates by pulsed laser deposition (PLD). Electrochemical etching is applied to the P-Si substrate to achieve a high surface area, facilitating enhanced adhesion and uniform growth of the InGaN layers. The formation of a wurtzite-phase InGaN structure, with pronounced diffraction peaks observed at the (002) and (004) planes, reflecting strong film–substrate interaction and high crystallinity, is confirmed by X-ray diffraction (XRD) measurements—a significant peak at 203.872 cm⁻¹, characteristic of InGaN vibrational modes revealed by a Raman spectroscopy. Photoluminescence (PL) analysis exhibited emission peaks at 510 nm, 700 nm, and 850 nm, corresponding respectively to band-edge transitions, deep-level defect emissions, and strain-induced states at the InGaN/P-Si interface. Collectively, these results show that InGaN/P-Si heterostructure demonstrates good optoelectronic properties, underscoring its viability for ultraviolet-visible-near-infrared photodetectors, light-emitting diodes, and a wide range of advanced optoelectronic device applications.