Gong Lei

Dr. Gong Lei

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 October 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
GLGong Lei
Gong Lei
Changsheng ZhuChangsheng Zhu
Changsheng Zhu
Unbalance compensation forces the unbalance rotor to rotate around the geometric axis, then suppresses the unbalance vibration of the rotor to the greatest extent. Aim to the unbalance compensation of active magnetic bearings (AMBs) systems in the full rotation range including rigid body mode frequencies, the polarity switching control (PSC) based on PID control was adopted to effectively suppress the rotor vibration. In the PSC, it was necessary to switch the polarity factor of the notching filter before and after the rigid mode frequencies of the rotor system. However, improper polarity switching frequency could increase the rotor vibration, even destabilize the rotor system. Therefore, in this article, the equivalent stiffness and damping defined by PID control was used to obtain the natural frequency of the AMBs rigid rotor system, and the selection method of polarity switching frequency and PID controller parameters was studied to ensure that the rotor system has a better unbalance compensation effect in the full speed range including the rigid body mode frequency. Besides, in order to further study whether the PSC is dependent on the controller types or not, H ∞ controller based on the PSC was also designed to compare the conclusion drawn from PID controller based on the PSC. PID controller and H ∞ controller are the representatives of fixed parameter controllers and unfixed parameter controllers, respectively. Finally, experiment results verified the correctness of the theoretical analysis.

27 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GLGong Lei
Gong Lei
WLWenjuan Luo
Wenjuan Luo
雨李雨 李
雨 李
JCJingwen Chen
Jingwen Chen
ZHZhiguang Hua
Zhiguang Hua
This paper proposes an adaptive fuzzy controller based on a switching notch filter to address the rotor unbalance vibration control problem of an active magnetic bearing (AMB) high-speed motor system in the full rotational speed range. Aiming at the complex nonlinear and time-varying characteristics of the AMB rigid rotor system, this study designs an adaptive fuzzy controller (AFC) that obtains fuzzy quantities by blurring the rotor vibration information and vibration rate of change as the input signals and then obtains the fuzzy set through fuzzy reasoning and modifies the parameters of the initial fuzzy controller. The initial fuzzy controller parameters are modified through fuzzy reasoning to improve the control effect and ensure the stable suspension of the rotor during high-speed rotation. At the same time, in order to effectively suppress the vibration of the rotor in high-speed operation due to unbalance and other factors, this paper introduces an adapting notch filter (ANF) as a vibration control strategy on the basis of AFC, and the notch filter is able to monitor the rotor vibration signals and adaptively adjust the center frequency and bandwidth. Finally, the correctness and effectiveness of the adaptive fuzzy controller based on a switching notch filter (AFC-ANF) are verified via simulations and experiments. The simulation results demonstrate that compared to traditional PID control, the AFC reduces the response time by 0.11 s. Under constant-speed operating conditions, the AFC-ANF strategy decreases rotor vibration by 60%, while under variable-speed conditions, it reduces rotor vibration displacement by 40%, showcasing significant vibration suppression effectiveness. This research provides a novel solution for vibration control in magnetic bearing systems, offering both important theoretical significance and practical application value.

18 September 2025 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
GLGong Lei
Gong Lei
JTJunsong Tao
Junsong Tao
QXQilin Xiong
Qilin Xiong
JCJingwen Chen
Jingwen Chen
ZHZhiguang Hua
Zhiguang Hua
This article proposes a control strategy integrating parameter adaptive particle swarm optimization (PA-PSO) and adaptive notch filter to address the challenges of residual imbalance vibration suppression and dynamic stiffness enhancement in the active magnetic bearing (AMB) rotor system under high-speed operating conditions. The four-degree-of-freedom rigid rotor dynamics model reveals the unbalanced force perturbation of the rotor caused by the unbalanced mass, as well as the mechanism of suppressing the resonance peaks in the critical speed region by the notch filter parameters. An innovative asymmetric collaborative optimization mechanism based on the Sigmoid function is introduced, which dynamically adjusts the inertia weight and learning factors to balance global exploration and local exploitation. Additionally, feedback on the fitness change rate and particle displacement constraints is incorporated to effectively suppress premature convergence of the algorithm. The parameters of the notch filter are optimized to suppress the resonance response in the critical speed region to ensure stable operation of the rotor at high speeds. Simulation and experimental results show that the method proposed significantly enhances the antiinterference ability while ensuring system stability, offering a novel approach for active vibration control in AMB-rotor system.

7 May 2025 in IEEE Access
Verified
Journal Article
Open access
GLGong Lei
Gong Lei
PHPai He
Pai He
DDDali Dai
Dali Dai
ZHZhiguang Hua
Zhiguang Hua
JCJingwen Chen
Jingwen Chen
In order to solve the problem of rotor vibration caused by the unbalanced mass of the Active magnetic bearing (AMBs) rotor system, an Enhanced Linear Extended State Observer (ELESO) is designed based on the linear Extended State Observer (LESO). Firstly, the lumped disturbance including the unbalanced force is observed by ELESO, and the observed value is filtered by the band-pass filter (BF), and secondly, the lumped disturbance is compensated in the frequency band where the peak of rotor vibration is generated, so as to reduce the peak vibration of the rotor, and the saturation of the power amplifier caused by compensation in the full frequency band can be avoided. Then, the poles of the closed-loop AMBs rotor system are analyzed, and it is proved that the proposed control method can ensure the stable operation of the system. Finally, the correctness and effectiveness of the proposed method are verified under the working conditions of no disturbance and sensor runout. The results show that the designed control method has a smaller unbalanced vibration peak and a significant reduction in the control current when the rotor is operating in the full speed range compared with the direct use of LESO.

15 January 2025 in Journal of Vibration Engineering & Technologies
Verified
Journal Article
Closed access
PDF file
GLGong Lei
Gong Lei
PHPai He
Pai He
WYWang Yichen
Wang Yichen
DZDang Zhaoyang
Dang Zhaoyang
CZChangsheng Zhu
Changsheng Zhu

12 November 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
GLGong Lei
Gong Lei
XWXingyu Wang
Xingyu Wang
WHWenjun Huang
Wenjun Huang
JCJingwen Chen
Jingwen Chen
This article proposes a joint optimization control strategy integrating a fuzzy controller with a three-parameter adaptive notch filter (TANF) to address rotor unbalance vibration in active magnetic bearings of high-speed rotating machinery. For the first time, an improved particle swarm optimization (IPSO) algorithm is used to cotune TANF parameters (notch depth k 2 and bandwidth k 1) and fuzzy controller gains in a unified optimization loop, targeting full-speed-range vibration suppression. The IPSO algorithm minimizes the integral of absolute error and incorporates adaptive inertia weight and learning factor adjustment strategies, significantly improving convergence speed, global search capability, and overall optimization efficiency. Comparative simulations and experiments under 60 Hz (constant low speed), 120 Hz (constant high speed), and acceleration conditions show that the proposed fuzzy-notch control reduces vibration amplitude, improves response speed, and maintains stable rotor vibration and control current over the full speed range. These results confirm the proposed strategy’s enhanced dynamic response, robust vibration suppression, and strong adaptability under varying operating conditions.