Micro and nano plastics (MNPs) pollution has emerged as a significant environmental issue in recent years. Plastic contamination in the environment poses risks to both human health and other organisms within the ecosystem. This review discusses the overall impact of MNPs on the performance of vegetable crops, including a global perspective on the topic. Bibliometric analysis reveals that most research on this subject has been concentrated in a few countries, although the number of studies has notably increased in recent years. MNPs accumulate in arable lands due to human activities, often altering the soil's physical, chemical, and biological properties in the rhizosphere. Vegetable crops absorb these MNPs mainly through their roots, leading to accumulation in the edible parts of the plants. Consequently, this results in phytotoxic symptoms and poor growth and development. The phytotoxic effects of MNPs are attributed to genetic and metabolic changes within the plant's cellular structure. Current research on MNPs has been limited to a few vegetable cultivars. Future studies should encompass a broader range of vegetable crops under both laboratory and field conditions to advance this burgeoning field of research. Additionally, examining various types of plastics is essential to comprehensively understanding their impact. Graphical Abstract
6 June 2023 in Journal of Material Cycles and Waste Management
One of the problems that arise due to typhoon and flooding is the generation of large volumes of disaster wastes, which poses threats to the environment and human health when not managed properly. This study focused on the identification of suitable locations of temporary storage sites (TSS) for disaster wastes using geographic information system to address gaps in disaster waste management. A set of criteria for selection was established based on the guidelines of the United Nations Environment/Office for the Coordination of Humanitarian Affairs Joint Unit (UNEP/OCHA), with constraints set based on existing guidelines and past studies. Map layers were standardized using Boolean logic, and the criteria were analyzed using ArcGIS Pro and Google Earth Pro. Areas in the Province of Cavite having high disaster risks, particularly Cavite City, Noveleta, and Kawit, were selected as study sites. From the analysis, a total of 18 TSS candidates were identified. It was determined that land use and distances from fishponds and built-up areas were the most sensitive criteria as they cover large portions of the area. For each TSS candidate, a 15-min service area map was generated using the ArcGIS Pro Network Analyst which showed that selected locations may serve multiple cities/municipalities.
15 October 2024 in Frontiers in Environmental Science
The Philippines is one of the world’s main contributors to global marine plastic pollution. However, field data remains scarce, so model estimates of riverine plastic pollution may be inaccurate. This paper aims to characterize the macrolitter observed along the Tullahan River, with focus on plastics, passing through the barangays of Quezon City and Valenzuela City in Metro Manila. The impact of solid waste management and land use activities on plastic flux were also investigated. For the floating litter, visual counting and float method were used to determine the plastic flux and river velocity, respectively. Riverbank litter was collected manually to characterize it based on plastic product and polymer type. Results show that the macroplastic flux was lowest on the site where residential houses are farthest from the stream. Waste characterization revealed that riverbank litter was primarily plastic – 30%–41% were residuals, and 5%–21% were recyclables. Both methods revealed that wrappers and thin PE plastics are the top contributors to riverine macroplastic pollution. Therefore, the entry of macroplastics into the river may be due to land use activities and weak enforcement of existing solid waste management (SWM) policies. The points discussed in the study can help in improving SWM and land use planning. The results can also increase the accuracy of model estimates.
This study aims to analyze the effect of chemical pretreatment using sodium hydroxide (NaOH) on the capacity of coco peat in removing of copper (II) ions from aqueous solutions. The effects of varying the molarity of NaOH, the solution pH, initial Cu(II) concentration, coco peat dosage and contact time were studied in batch experiment. The result of the preliminary pretreatment study shows that treatment with 0.5M NaOH greatly enhanced the metal sorption capacity of raw coco peat. The uptake capacity for Cu of the raw coco peat was increased from 46% to 83% at pH 4.0 and from 15% to 27% uptake for initial solution pH of 2.4. The results showed that the removal rate is directly proportional to pH, coco peat’s dosage and contact time and inversely proportional to Cu(II) concentration. The adsorption process is best explained by the Langmuir isotherm than the Freundlich isotherm, indicating monolayer adsorption on a homogenous surface. The rate of reaction follows the pseudo-second order kinetic model, signifying that chemisorption is the ratelimiting mechanism. The results of the Fourier Transform Infra-Red (FTIR) analysis indicated that the main functional groups involved in the sorption of copper to NaOH pretreated coco peat are the hydroxyl, carboxyl and phenolic groups. Based on the results of this study, it was found that pretreating coco peat with NaOH significantly improve the overall efficiency of coco peat in removing Cu(II) by adsorption process.
In the Philippines, plastic laminates are seen everywhere because most of the products consumed are sold in sachet packets. These packets are composed of multiple layers of polymers, making them very difficult to recycle. Numerous studies concerning plastic waste as an additive to concrete and asphalt have shown increase in strength, decrease in deflection, and decrease in the overall construction cost. In this research, shredded plastic laminates were used as a partial substitute to bitumen (pen. 60/70). Volume replacement of plastic laminates to bitumen was performed from 0% to 100% with increments of 10%. The samples were tested for softening, penetration, and ductility. Results of the tests showed that as the replacement percentage increased, the penetration and ductility of the mastic decreased, while the softening point increased. This indicates that the mastic becomes tougher and brittle with the addition of plastic laminates. Both the penetration and softening point for the samples passed the standards provided by the Department of Public Works and Highways, which indicate that should the modified asphalt mastics be used in asphalt concrete, it would be less likely to deform under repeated loading, it would also be less susceptible to temperature changes. Meanwhile, the ductility measured for the modified asphalt mixtures did not pass the standards provided by Department Order 152. This may indicate an increase in the asphalt pavement’s tendency to crack under repeated loading. Despite the significant improvement in the physical properties of the binder even at 10% replacement with the plastic laminates, the presence of foil may have contributed to the loss in ductility. Further studies should be conducted considering a smaller replacement range between 2-10%