R. Jalal

Dr. R. Jalal


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 March 2024 in Frontiers in Chemistry
Verified
Journal Article
Open access
SASana Azeroual
Sana Azeroual
KKKhalid Khatib
Khalid Khatib
ABAhmed Belfkira
Ahmed Belfkira
EAEl-houssaine Ablouh
El-houssaine Ablouh
ZHZouhair Hanani
Zouhair Hanani
RJR. Jalal
R. Jalal
The presence of organic dyes in wastewater raises significant environmental and human health concerns, owing to their high toxicity. In light of this, a novel adsorbent material with porous cryogel architecture was developed and employed for the effective removal of organic dyes from an aqueous solution. Initially, a titanium dioxide nanowire doped with zirconium HZTO was synthesized by the hydrothermal process. Subsequently, the beads (SA/HZTO) of sodium alginate and HZTO were successfully prepared through a cross-linking process, employing Ca2+ ions as the crosslinking agent. Structural analysis of SA/HZTO beads was performed using FTIR, SEM, and EDX techniques. We systematically examined the impact of different conditions, including the initial dye concentration, pH, contact time, and adsorbent dosage, on the adsorption process. Batch experiments, both in signal and binary systems, were conducted to rigorously assess the dye adsorption capabilities. Kinetic modeling revealed that the adsorption process adhered to the pseudo-second-order kinetic model. Remarkably, the prepared beads exhibited impressive adsorption capacities of 26 and 29 mg/g toward methylene blue (MB) and safranin (SF), respectively. SA/HZTO beads have demonstrated excellent adsorption properties, offering a promising avenue for the development of low-cost, efficient, and reusable adsorbent to remove dyes from wastewater.

2 February 2025 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
HEH. Elmoudnia
H. Elmoudnia
YMYounoussa MILLOGO
Younoussa MILLOGO
Paulina FariaPaulina Faria
Paulina Faria
RJR. Jalal
R. Jalal
MWMohamed Waqif
Mohamed Waqif
LSLatifa Saâdi
Latifa Saâdi
This study focuses on the development of an insulation biocomposite using Doum palm (Chamaerops humilis) fibers reinforced with a natural binder based on citric acid and glycerol. The main objective is to optimize the thermal conductivity and mechanical properties of the biocomposite as a function of fiber preparation (short or powdered fibers) and binder content (20%, 30% and 40%), and relate them to the bonding of the fibers and the binder. The obtained results suggest that the addition of the binder greatly enhances the density, compressive strength and Young’s modulus of biocomposites. More specifically, the addition of 20% by weight of the citric acid/glycerol binder improves the bond between fibers, whether they are short fibers or powders. This leads to an increase in the mechanical properties, with Young’s modulus reaching (212.1) MPa and compressive strength at (24.3) MPa. On the other hand, the results show that these biocomposites also have acceptable thermal insulation performance, achieving a thermal conductivity of (0.102) W/(m·K), making them suitable for a variety of applications in sustainable buildings and for refurbishment.

30 June 2026 in Water
Verified
Journal Article
Open access
PDF file
LMLhachmi MOUSSAOUI
Lhachmi MOUSSAOUI
HAHalima Asli
Halima Asli
MBMeriem Bamaarouf
Meriem Bamaarouf
LSLatifa Saadi
Latifa Saadi
RJR. Jalal
R. Jalal
AAAbdeslam Abid
Abdeslam Abid
Two natural materials, pozzolan from Aguelmous (Middle Atlas, Morocco) and local gravel (3–6 mm), were selected and compared as permeable layers in a multi-soil layering (MSL) system treating domestic wastewater. This comparison was motivated by the need to evaluate a widely used conventional material in Morocco (gravel) against a highly porous volcanic pozzolan expected to improve pollutant removal due to its superior structural and physicochemical properties. The study combined physicochemical characterization, adsorption experiments using methylene blue (MB) and methyl orange (MO), and pilot-scale multi-soil layering (MSL) system tests under vertical-flow conditions. Pozzolan exhibited a highly porous structure with a specific surface area of 13.77 m2·g−1 and a total porosity of 70.12%, compared with 1.92 m2·g−1 and 45.49% for gravel, respectively. These properties resulted in higher adsorption performance, with MB removal efficiencies of 66.60% for pozzolan versus 45.35% for gravel at 16.5 mg·L−1, and MO removal efficiencies of 69.12% versus 58.55% at 10 mg·L−1. Correspondingly, pozzolan showed higher adsorption capacities for MB (9.976 mg·g−1) and MO (1.534 mg·g−1) than gravel (0.829 and 0.750 mg·g−1, respectively). In pilot-scale operation, pozzolan-based filters achieved higher removal efficiencies for BOD5 (82.01%), COD (86.14%), ammoniacal nitrogen (89.48%), and total phosphorus (66.30%) compared with gravel (75.56%, 78.24%, 61.56%, and 50.42%, respectively). The enhanced ammoniacal nitrogen removal in filter F2 (6–15 mm) is attributed to favorable aerobic conditions within the system, which likely promoted nitrification due to improved oxygen availability. However, the absence of sufficient anoxic zones limited denitrification, leading to nitrate (NO3−) accumulation. Overall, the results indicate that natural pozzolan is a highly suitable permeable material for enhanced pollutant removal, making it a promising alternative to conventional gravel in decentralized MSL wastewater treatment systems.