In this article, a sliding mode control scheme is proposed for a quadrotor in the presence of an exogenous disturbance. A nonlinear sliding mode surface is constructed based on the estimate output of a disturbance observer to reject the effect of the unknown disturbance in the quadrotor. The desired control performance is achieved by bringing the state from unstable state to stable ones. To show the effectiveness of the developed control scheme, simulation results are provided for illustration of the designed controller based on disturbance observer.
9 August 2021 in Journal of Intelligent & Robotic Systems
Purpose: In this research paper, an adaptive output-feedback robust active disturbance rejection control (RADRC) is designed for the multiple input multiple output (MIMO) quadrotor attitude model subject to unwanted uncertainties and disturbances (UUDs).Design/methodology/approach: In order to achieve the desired control objectives in the presence of UUDs, the low pass filter (LPF) and extended high gain observer (EHGO) methods are used for the estimation of matched and mismatched UUDs, respectively. Furthermore, for solving the chattering incurred in the standard sliding mode control (SMC), a multilayer sliding mode surface is constructed. For formulating the adaptive output-feedback RADRC algorithm, the EHGO, LPF and SMC schemes are combined using the separation principle.Findings: The findings of this research work include the design of an adaptive output-feedback RADRC with the ability to negate the UUDs as well as estimate the unknown states of the quadrotor attitude model. In addition, the chattering problem is addressed by designing a modified SMC scheme based on the multilayer sliding mode surface obtained by utilizing the estimated state variables. This sliding mode surface is also used to obtain the adaptive criteria for the switching design gain parameters involved in the SMC. Moreover, the requirement of high design gain parameters in the EHGO is solved by combining it with the LPF.Originality/value: Designing the flight control techniques while assuming that the state variables are available is a common practice. In addition, to obtain robustness, the SMC technique is widely used. However, in practice, the state variables might not be available due to unknown parameters and uncertainties, as well as the chattering due to SMC reduces the performances of the actuators. Hence, in this paper, an adaptive output-feedback RADRC technique is designed to solve the problems of UUDs and chattering.
Unmanned aerial vehicles must achieve precise flight maneuvers despite disturbances, parametric uncertainties, modeling inaccuracies, and limitations in onboard sensor information. This paper presents a robust adaptive control for trajectory tracking under nonlinear disturbances. Firstly, parametric and modeling uncertainties are addressed using model reference adaptive control principles to ensure that the dynamics of the aerial vehicle closely follow a reference model. To address the effects of disturbances, a modified nonlinear disturbance observer is designed based on estimated state variables. This observer effectively attenuates constant, nonlinear disturbances with variable frequency and magnitude, and noises. In the next step, a two-stage sliding mode control strategy is introduced, incorporating adaptive laws and a commanded-filter to compute numerical derivatives of the state variables required for control design. An error compensator is integrated into the framework to reduce numerical and computational delays. To address sensor inaccuracies and potential failures, a high-gain observer-based state estimation technique is employed, utilizing the separation principle to incorporate estimated state variables into the control design. Finally, Lyapunov-based stability analysis demonstrates that the system is uniformly ultimately bounded. Numerical simulations on a DJI F450 quadrotor validate the approach’s effectiveness in achieving robust trajectory tracking under disturbances.
23 October 2024 in Engineering Science and Technology, an International Journal