The purpose of this study is to investigate the effects of the wind drift factor under strong tidal conditions in the western coastal area of Korea on the movement of oil slicks caused by the Hebei Spirit oil spill accident in 2007. The movement of oil slicks was computed using a simple simulation model based on the empirical formula as a function of surface current, wind speed, and the wind drift factor. For the simulation, the Environmental Fluid Dynamics Code (EFDC) model and Automatic Weather System (AWS) were used to generate tidal and wind fields respectively. Simulation results were then compared with 5 sets of spaceborne optical and synthetic aperture radar (SAR) data. From the present study, it was found that highest matching rate between the simulation results and satellite imagery was obtained with different values of the wind drift factor, and to first order, this factor was linearly proportional to the wind speed. Based on the results, a new modified empirical formula was proposed for forecasting the movement of oil slicks on the coastal area.
This study proposes an approaching method of identifying sea fog by using Geostationary Ocean Color Imager (GOCI) data through applying a Convolution Neural Network Transfer Learning (CNN-TL) model. In this study, VGG19 and ResNet50, pre-trained CNN models, are used for their high identification performance. The training and testing datasets were extracted from GOCI images for the area of coastal regions of the Korean Peninsula for six days in March 2015. With varying band combinations and changing whether Transfer Learning (TL) is applied, identification experiments were executed. TL enhanced the performance of the two models. Training data of CNN-TL showed up to 96.3% accuracy in matching, both with VGG19 and ResNet50, identically. Thus, it is revealed that CNN-TL is effective for the detection of sea fog from GOCI imagery.
This paper investigates the positioning accuracy of image pairs achieved by integrating images from multiple satellites. High-resolution satellite images from IKONOS, QuickBird, and KOMPSAT-2 for Daejeon, Korea were combined to produce pairs of stereo images. From single-satellite stereo pairs to multiple-satellite image pairs, all available combinations were analyzed via a rational function model (RFM). The positioning accuracy of multiple-satellite pairs was compared to a typical single-satellite stereo pair. The results show that dual-satellite integration can be an effective alternative to single-satellite stereo imagery for horizontal position mapping, but is less accurate for vertical mapping. The integration of additional higher-resolution images can improve the overall accuracy of the existing two images, but, conversely, may result in lower accuracy when very weak convergence or bisector elevation (BIE) angles occur. This highlights that the use of higher resolution images may not ensure improved accuracy, as it can result in very weak geometry. The findings confirm that multiple-satellite images can replace or enhance typical stereo pairs, but also suggest the need for careful verification, including consideration of various geometric elements and image resolution. This paper reveals the potential, limitations, and important considerations for mapping applications using images from multiple satellites.
8 February 2018 in International Journal of Remote Sensing
Mapping of sea ice in the Arctic region is essential for environmental monitoring and ship navigation. Synthetic Aperture Radar can be used to observe sea ice at high spatial and temporal resolutions over an extended range at high latitudes. The sea ice discrimination method based on Support Vector Machine was applied to 226 scenes of Sentinel-1 acquired in Extra Wide Swath Mode with dual-polarization (HH & HV) from 1 July 2016 to 31 August 2016 along the Northern Sea Route from the Kara Sea to the Chukchi Sea. The discriminated sea ice results were evaluated using both manually classified ice maps and Multisensor Analyzed Sea Ice Extent (MASIE). It is revealed that the proposed method based on the backscattering coefficient (σ0), incidence angle, air temperature, and wind speed improves the sea ice and water discrimination, showing matching rates of approximately 93.4% for manual classification and 82.8% for MASIE. It is concluded that the method could be considered for an operational use to discriminate summer sea ice from open water in the Northern Sea Route.
This paper presents results on the estimation of the phase velocity of internal waves (IWs) in the shallow waters of the South China Sea in terms of the water depth using satellite data. To calculate the phase velocity, two methods are considered. The first is based on the different positions of IW images acquired by Environmental Satellite-advanced synthetic aperture radar (ASAR) and Terra–Moderate Resolution Imaging Spectroradiometer (MODIS) in a very short time interval, and the second method uses the images of several packets of IWs associated with semidiurnal tidal period in either a single ASAR or MODIS image. The former is termed as the multitemporal images (MTI) method, and the latter is referred to as the tidal period images (TPI) method. The results show that the wave velocities estimated by the MTI method have strong correlation with those derived from a depth-dependent IW propagation theory, while those by the TPI method have moderate correlation. Both the methods can be used to estimate the IW phase velocity but with reduced accuracy by the TPI method. The main reason of this reduced accuracy is the long tidal period during which the characteristics of IWs change as they propagate over long distance in the water of variable currents and/or bottom topography.
Ship type classification of synthetic aperture radar imagery with convolution neural network (CNN) has been faced with insufficient labeled datasets, unoptimized and noised polarization images that can deteriorate a classification performance. Meanwhile, numerous labeled text information for ships, such as length and breadth, can be easily obtained from various sources and can be utilized in a classification with k-nearest neighbor (KNN). This study proposes a method to improve the efficiency of ship type classification from Sentinel-1 dual-polarization data with 10 m pixel spacing using both CNN and KNN models. In the first stage, Sentinel-1 intensity images centered on ship positions were used in a rectangular shape to apply an image processing procedure such as head-up, padding and image augmentation. The process increased the accuracy by 33.0% and 31.7% for VH (vertical transmit and horizontal receive) and VV (vertical transmit and vertical receive) polarization compared to the CNN-based classification with original ship images, respectively. In the second step, a combined method of CNN and KNN was compared with a CNN-alone case. The f1-score of CNN alone was up to 85.0%, whereas the combination method showed up to 94.3%, which was a 9.3% increase. In the future, more details on an optimization method will be investigated through field experiments of ship classification.