In the last decade, there has been a surge in the number of academic research groups and commercial companies exploiting naturally occurring cosmic-ray muons for imaging purposes in a range of industrial and geological applications. Since 2009, researchers at the University of Glasgow and the UK National Nuclear Laboratory (NNL) have pioneered this technique for the characterization of shielded nuclear waste containers with significant investment from the UK Nuclear Decommissioning Authority and Sellafield Ltd. Lynkeos Technology Ltd. was formed in 2016 to commercialize the Muon Imaging System (MIS) technology that resulted from this industry-funded academic research. The design, construction and performance of the Lynkeos MIS is presented along with first experimental and commercial results. The high-resolution images include the identification of small fragments of uranium within a surrogate 500-litre intermediate level waste container and metal inclusions within thermally treated GeoMelt® R&D Product Samples. The latter of these are from Lynkeos' first commercial contract with the UK National Nuclear Laboratory. The Lynkeos MIS will be deployed at the NNL Central Laboratory facility on the Sellafield site in Summer 2018 where it will embark upon a series of industry trials. This article is part of the Theo Murphy meeting issue ‘Cosmic-ray muography’.
24 July 2021 in Journal of Nondestructive Evaluation
Quality assurance and condition assessment of concrete structures is an important topic world-wide due to the aging infrastructure and increasing traffic demands. Common topics include, but are not limited to, localisation of rebar or tendon ducts, geometrical irregularities, cracks, voids, honeycombing or other flaws. Non-destructive techniques such as ultrasound or radar have found regular, successful practical application but sometimes suffer from limited resolution and accuracy, imaging artefacts or restrictions in detecting certain features. Until the 1980s X-ray transmission was used in case of special demands and showed a much better resolution than other NDT techniques. However, due to safety concerns and cost issues, this method is almost never used anymore. Muon tomography has received much attention recently. Novel detectors for cosmic muons and tomographic imaging algorithms have opened up new fields of application, such as the investigation of freight containers. Muon imaging also has the potential to fill some of the gaps currently existing in concrete NDT. As a first step towards practical use and as a proof of concept we used an existing system to image the interior of a reference reinforced 600 kg concrete block. Even with a yet not optimized setup for this kind of investigation, the muon imaging results are at least of similar quality compared to ultrasonic and radar imaging, potentially even better. The data acquisition takes more time and signals contain more noise, but the images allowed to detect the same important features that are visible in conventional high energy X-ray tomography. In our experiment, we have shown that muon imaging has potential for concrete inspection. The next steps include the development of mobile detectors and optimising acquisition and imaging parameters.
10 December 2018 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
Owing to the high penetrating power of high-energy cosmic ray muons, muon imaging techniques can be used to image large bulky objects, especially objects with heavy shielding. Muon imaging systems work just like CT scanners in the medical imaging field—that is, they can reveal information inside of a target. There are two forms of muon imaging techniques: muon absorption imaging and muon multiple scattering imaging. The former is based on the flux attenuation of muons, and the latter is based on the multiple scattering of muons in matter. The muon absorption imaging technique is capable of imaging very large objects such as volcanoes and large buildings, and also smaller objects like spent fuel casks; the muon multiple scattering imaging technique is best suited to inspect smaller objects such as nuclear waste containers. Muon imaging techniques can be applied in a broad variety of fields, i.e. from measuring the magma thickness of volcanoes to searching for secret cavities in pyramids, and from monitoring the borders of countries checking for special nuclear materials to monitoring the spent fuel casks for nuclear safeguards applications. In this paper, the principles of muon imaging are reviewed. Image reconstruction algorithms such as Filtered Back Projection and Maximum Likelihood Expectation Maximization are discussed. The capability of muon imaging techniques is demonstrated through a Geant4 simulation study for imaging a nuclear spent fuel cask. This article is part of the Theo Murphy meeting issue ‘Cosmic-ray muography’.
The civil engineering industry faces a critical need for innovative non-destructive evaluation methods, particularly for ageing critical infrastructure, such as bridges, where current techniques fall short. Muography, a non-invasive imaging technique, constructs three-dimensional density maps by detecting the interactions of naturally occurring cosmic-ray muons within the scanned volume. Cosmic-ray muons offer both deep penetration capabilities due to their high momenta and inherent safety due to their natural source. However, the technology’s reliance on this natural source results in a constrained muon flux, leading to prolonged acquisition times, noisy reconstructions, and challenges in image interpretation. To address these limitations, we developed a two-model deep learning approach. First, we employed a conditional Wasserstein Generative Adversarial Network with Gradient Penalty (cWGAN-GP) to perform predictive upsampling of undersampled muography images. Using the Structural Similarity Index Measure (SSIM), 1-day sampled images were able to match the perceptual qualities of a 21-day image, while the Peak Signal-to-Noise Ratio (PSNR) indicated a noise improvement to that of 31 days worth of sampling. A second cWGAN-GP model, trained for semantic segmentation, was developed to quantitatively assess the upsampling model’s impact on each of the features within the concrete samples. This model was able to achieve segmentation of rebar grids and tendon ducts embedded in the concrete, with respective Dice–Sørensen accuracy coefficients of 0.8174 and 0.8663. This model also revealed an unexpected capability to mitigate—and in some cases entirely remove—z-plane smearing artifacts caused by the muography’s inherent inverse imaging problem. Both models were trained on a comprehensive dataset generated through Geant4 Monte Carlo simulations designed to reflect realistic civil infrastructure scenarios. Our results demonstrate significant improvements in both acquisition speed and image quality, marking a substantial step toward making muography more practical for reinforced concrete infrastructure monitoring applications.
Legacy storage sites for nuclear waste can pose a serious environmental problem. In fact, since certain sites date from the middle of the last century when safety protocols had not been properly established and strict bookkeeping was not enforced, a situation has evolved where the content of storage silos is basically known only with a large uncertainty both on quantity and quality. At the same time maintenance work on old storage structures is becoming ever more urgent and yet this work requires exactly that information which is now lacking on the type of waste that was stored inside. Because of the difficulty in accessing the storage silos and the near impossibility of making visual inspections inside, techniques have to be developed which can determine the presence or absence of heavy elements (i.e. uranium) within the structures. Muography is a very promising technique which could allow the survey of previously inaccessible structures. We have begun an evaluation performing feasibility studies using simulations based on real case scenarios. This paper will outline the storage site scenarios and then present some of the results obtained from the Monte Carlo simulations.