We have developed an integrated, multienzyme functionalized membrane reactor for bioconversion of a lignin model compound involving enzymatic catalysis. The membrane bioreactors were fabricated through the layer-by-layer assembly approach to immobilize three different enzymes (glucose oxidase, peroxidase and laccase) into pH-responsive membranes. This novel membrane reactor couples the in situ generation of hydrogen peroxide (by glucose oxidase) to oxidative conversion of a lignin model compound, guaiacylglycerol-β-guaiacyl ether (GGE). Preliminary investigation of the efficacy of these functional membranes towards GGE degradation is demonstrated under convective flow mode. Over 90% of the initial feed could be degraded with the multienzyme immobilized membranes at a residence time of approximately 22 s. GGE conversion product analysis revealed the formation of oligomeric oxidation products upon reaction with peroxidase, which may be a potential hazard to membrane bioreactors. These oxidation products could further be degraded by laccase enzymes in the multienzymatic membranes, explaining the potential of multi enzyme membrane reactors. The multienzyme incorporated membrane reactors were active for more than 30 days of storage time at 4 °C. During this time span, repetitive use of the membrane reactor was demonstrated involving 5–6 h of operation time for each cycle. The membrane reactor displayed encouraging performance, losing only 12% of its initial activity after multiple cycles of operation.
22 August 2019 in Industrial & Engineering Chemistry Research
Dense Pd-Ag/MPSS composite membranes were fabricated on macroporous stainless steel substrate (MPSS) by novel surfactant induced electroless plating (SIEP) process. SIEP was effective in synthesizing dense and thinner Pd-Ag films on MPSS with shorter deposition time in presence of cationic DTAB. SIEP membranes showed 3–8 times higher H2 permeance compared to that of conventional EP membranes. The SEM, XRD, and EDS studies confirmed the formation of Pd-Ag alloy and no diffusion of MPSS substrate metal components into the Pd-Ag film. The Pd-Ag membrane (15 μm thickness) was tested for long-term stability under thermal cycling (623–723-623 K) up to 42 days.