The present study focuses on using apricot seeds shells and walnut shells as a potential renewable material for biorefinery in Ukraine. The goal of the research work was to determine the relationship between the chemical composition of solid residues from biomass after acid pretreatment with H₂SO₄, alkaline pretreatment with NaOH, and a steam explosion pretreatment and the recovery of sugars and lignin after further enzymatic hydrolysis with the application of an industrial cellulase Cellic CTec2. Apricot seeds shells and walnut shells consist of lots of cellulose (35.01 and 24.19%, respectively), lignin (44.55% and 44.63%, respectively), hemicelluloses (10.77% and 26.68%, respectively), and extractives (9.97% and 11.41%, respectively), which affect the efficiency of the bioconversion of polysaccharides to sugars. The alkaline pretreatment was found to be more efficient in terms of glucose yield in comparison with that of acid and steam explosion, and the maximum enzymatic conversions of cellulose reached were 99.7% and 94.6% for the solids from the apricot seeds shells and the walnut shells, respectively. The maximum amount of lignin (82%) in the residual solid was obtained during the processing of apricot seed shells submitted to the acid pretreatment. The amount of lignin in the solids interferes with the efficiency of enzymatic hydrolysis. The results pave the way for the efficient and perspective utilization of shells through the use of inexpensive, simple and affordable chemical technologies, obtaining value-added products, and thus, reducing the amount of environmental pollution (compared to the usual disposal practice of direct burning) and energy and material external dependency (by taking advantage of these renewable, low-cost materials).

The aim of this work was to evaluate the economic feasibility of the bioethanol production (BEP) based on olive tree pruning (OTP) as a biomass feedstock with optimization of the dilute acid pretreatment in focus. For this, the BEP was simulated taking into account the influence of the operating conditions of the pretreatment stage. Then, the techno-economic results were analyzed by means of the response surface methodology (RSM). The results show that lowest price of BE was 1.94 USD l⁻¹ with a yield of 174.12 l t⁻¹ OTP under optimal conditions. As a conclusion, the raw material cost has a strong influence in the economic feasibility of the BEP from OTP. The inclusion of other processing lines into the process would improve the process economy.

The production of furfural from renewable sources, such as lignocellulosic biomass, has gained great interest within the concept of biorefineries. In lignocellulosic materials, xylose is the most abundant pentose, which forms the hemicellulosic part. One of the key steps in the production of furfural from biomass is the dehydration reaction of the pentoses. The objective of this work was to assess the conditions under which the concentration of furfural is maximized from a synthetic, monophasic, and homogeneous xylose medium. The experiments were carried out in a microwave reactor. FeCl₃ in different proportions and sulfuric acid were used as catalysts. A two-level, three-factor experimental design was developed for this purpose. The results were further analyzed through a second experimental design and optimization was performed by response surface methodology. The best operational conditions for the highest furfural yield (57%) turned out to be 210 °C, 0.5 min, and 0.05 M FeCl₃.

Due to population growth in the coming years, an increase in agricultural production will soon be mandatory, thus requiring fertilizers that are more environmentally sustainable than the currently most-consumed fertilizers since these are important contributors to climate change and water pollution. The objective of this work is the techno-economic evaluation of the production of biofertilizer concentrated in free amino acids from microalgal biomass produced in a wastewater treatment plant, to determine its economic viability. A process proposal has been made in six stages that have been modelled and simulated with the ASPEN Plus simulator. A profitability analysis has been carried out using a Box–Behnken-type response surface statistical design with three factors—the cost of the biomass sludge, the cost of the enzymes, and the sale price of the biofertilizer. It was found that the most influential factor in profitability is the sale price of the biofertilizer. According to a proposed representative base case, in which the cost of the biomass sludge is set to 0.5 EUR/kg, the cost of the enzymes to 20.0 EUR/kg, and the sale price of the biofertilizer to 3.5 EUR/kg, which are reasonable costs, it is concluded that the production of the biofertilizer would be economically viable.

Avocado has become fashionable due to its great organoleptic and nutritional properties. It is consumed as a fresh product and it is also processed to obtain salad oil and guacamole. In all cases, the only usable portion is the pulp. Therefore, to be a more sustainable and profitable agribusiness, it is important to recognize which compounds from the peel and the stone waste can be converted into valuable bio-products. Therefore, their chemical composition was determined according to the National Renewable Energy Laboratory, the total phenolic content by the Folin-Ciocalteu method and the antioxidant properties by the FRAP and TEAC assays. The main components of the peel and stone were acid-insoluble lignin (35.0% and 15.3%, respectively), polymeric sugars (23.6% and 43.9%, respectively), and the aqueous extractives (15.5% and 16.9%, respectively). Both biomasses contain lipids and protein, but a minor proportion (<6%). The valorization of lignin and sugars is of interest given the high content; stones are a rich source of glucose (93.2% of the polymeric fraction), which could be used to obtain biofuels or derivatives of interest. The extractive fraction of the peel contained the highest number of phenolic compounds (4.7 g/100 g biomass), mainly concentrated in the aqueous fraction (i.e., 87%) compared to the ethanol one, which was subsequently extracted. It correlated with major antioxidant activity and, therefore, the peel can be applied to obtain antioxidants and water can be used as an environmentally friendly extraction solvent.