In order to analyze the explosion risk of the engine room, this paper uses CFD software to simulate the LNG leakage process in the engine room of the ship, and uses the combustible gas cloud obtained from the leakage simulation to simulate the explosion, analyzing its combustion and explosion dynamics. On the basis of previous studies, this paper studies the coupling of leakage and explosion simulation to ensure that it conforms to the real situation. At the same time, taking explosion overpressure, explosion temperature, and the mass fraction of combustion products as the breakthrough point, this paper studies the harm of explosion to human body and the influence of ignition source location on the propagation characteristics of LNG explosion shock wave in the engine room, and discusses the influence of obstacles on gas diffusion and accumulation. The results show that the LNG leakage reaches the maximum concentration in the injection direction, and the obstacles in the cabin have a significant effect on the diffusion and accumulation of gas. In the explosion simulation based on the leakage results, it can be determined that the shape of the pressure field generated by the explosion is irregular, and the pressure field at the obstacle side has obvious accumulation. Finally, in order to reduce the explosion hazard, the collaborative strategy of modular layout, directional ventilation, and gas detection is proposed, which provides ideas for the explosion-proof design of the cabin.

In the maritime industry, hydrogen fuel cell ships demonstrate significant potential for development due to their environmental friendliness and high efficiency. However, the risks of fire and explosion caused by hydrogen leakage pose severe challenges to their safety. To enhance the safety of hydrogen fuel cell ships and mitigate the explosion hazards caused by leakage, this study employs the XiFoam solver in the OpenFOAM v9 to establish an explosion model for a full-scale hydrogen fuel cell compartment within a hydrogen fuel cell ship. The model simulates the transient explosion process following high-pressure hydrogen leakage under varying initial hydrogen concentrations and premixed fuel conditions. By analyzing the temporary evolution of temperature distribution, flame front propagation, and explosion pressure, the study provides a comprehensive understanding of the safety implications of hydrogen leakage at different locations within the fuel cell. Specifically, increasing the hydrogen concentration from ΦH₂ = 0.10 to ΦH₂ = 0.18 and ΦH₂ = 0.20 significantly elevates the overpressure peak and accelerates the flame speed from 250 m/s to 370 m/s, with local pressure gradients approaching the deflagration to detonation transition threshold. The simulation results contribute valuable insights into optimizing hydrogen fuel cell design, formulating effective fire safety strategies, and improving overall ship safety.

To investigate the propagation of explosion shock waves within a ship’s engine room, a two-story engine room of a cargo ship was selected as the research object. The BlastFOAM solver in OpenFOAM-9 software was utilized to conduct numerical simulations of the explosion dynamics in the engine room. The results demonstrate that the explosion impact force escalates with the quantity of explosives. Following a liquefied natural gas (LNG) explosion, the shock waves exerted on the ventilation duct and control room are significantly stronger in terms of maximum pressure and intensity compared with those generated by a naphtha explosion. Comprehensive analyses of shock wave pressure distribution, structural damage, and energy absorption reveal that the centralized control room sustains the most severe damage from shock waves, while the ventilation ducts are also significantly impacted. The mechanical equipment absorbs the majority of the shock wave impact while reflecting a minor portion, leading to the intersection of direct and reflected waves. This study provides valuable insights for enhancing the explosion resistance of ship engine rooms, optimizing equipment layout within cabins, and improving the structural resilience of cabin designs.