Raushan Kaiynbayeva

Prof. Raushan Kaiynbayeva

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 August 2022 in Crystals
Verified
Journal Article
Open access
PDF file
GSGita Sultanbayeva
Gita Sultanbayeva
AAAktolkyn Agatayeva
Aktolkyn Agatayeva
RKRaushan Kaiynbayeva
Raushan Kaiynbayeva
NKNazym Kozhabekova
Nazym Kozhabekova
RCRaisa Chernyakovа
Raisa Chernyakovа
UJUmurzak Jusipbekov
Umurzak Jusipbekov
This paper presents the systematic studies of the sorption capacity of natural zeolite with respect to In3+ and Ga3+ cations in the model systems “natural zeolite–In3+–H2O” and “natural zeolite–In3+–Ga3+–H2O”, while varying a number of the main process factors. The patterns of sorption of In3+ and Ga3+ cations by the natural zeolite of the Shankanai deposit are revealed, depending on the zeolite vs. solution ratio, temperature, and time. It is shown that the sorption of In3+ cations by natural zeolite can be controlled by the process duration. The longer the process, the less the sorption by natural zeolite. It has been found that the sorption of In3+ cations in the “natural zeolite–In3+–Ga3+–H2O” model system depends on the amount of zeolite and temperature, and the sorption of Ga3+ cations depends on the temperature and time. The physicochemical characteristics of the spent sorbents confirm the sorption of the cations, present in the systems under study.

19 March 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
GSGita Sultanbayeva
Gita Sultanbayeva
RKRaushan Kaiynbayeva
Raushan Kaiynbayeva
RCRaisa Chernyakovа
Raisa Chernyakovа
Hamdi TemelHamdi Temel
Hamdi Temel
UJUmurzak Jusipbekov
Umurzak Jusipbekov
KTKhaidar Tassibekov
Khaidar Tassibekov
Chromium pollution has emerged as a critical environmental concern, prompting extensive research into the chemical and mineralogical properties of refined ferrochrome (RFC) slag, the leaching of chromium using sulfuric acid, and the adsorption of chromium cations onto natural zeolite. The aim of the study is to analyze the chemical and mineralogical properties of purified ferrochrome slag (RFC) from the Aktobe Ferroalloy Plant and its leaching with sulfuric acid, as well as to study the effectiveness of Shankanai zeolite in the adsorption of chromium cations from a sulfuric acid solution to improve waste management in the ferrochrome industry. Semi-quantitative X-ray analysis reveals that the dominant phase in RFC slag is olivine (50.7% Ca2SiO4). The optimal chromium transition rate (16.67%) occurs in dilute H2SO4 (23%) after 145 min of leaching, while the highest transition efficiency (18.0–18.5%) is achieved at 90 °C with a leaching duration of 145–180 min. Chromium in the RFC slag cake is predominantly in the divalent state, existing as pentahydrate chromium (II) sulfate (CrSO4•5H2O). The chromium sorption process was studied in a sulfuric acid solution obtained after leaching of ferrochrome slags. The process of chromium sorption by Shankanai zeolite from sulfuric acid has been studied for the first time, and the influence of the main technological parameters of the process on the degree of its purification has been established. It was determined that the highest degree of purification of a chromium-containing sulfuric acid solution is achieved with a ratio of zeolite:chromium-containing sulfuric acid solution equal to 1:10, heated to 35 °C for 15 min, and it reaches (63.6–69.0%). The natural zeolite of the Shankanai deposit is an effective, and inexpensive sorbent for cleaning aggressive media, particularly media contaminated with chromium-containing sulfuric acid. X-ray diffraction analysis further confirmed that both chromium and sulfur ions participate in the sorption process, as evidenced by microstructural changes in the zeolite, including pore filling and smoothing observed in microphotographs. These findings underscore the potential of natural zeolite as an efficient and cost-effective adsorbent for the remediation of chromium-contaminated solutions following sulfuric acid leaching. Its ability to adsorb chromium ions highlights its significant applicability in environmental cleanup efforts. This study contributes to sustainability by offering an environmentally friendly and cost-effective method for chromium removal, reducing industrial waste impact and promoting circular economy principles by utilizing natural zeolite, a readily available and recyclable adsorbent.

22 May 2025 in Crystals
Verified
Journal Article
Open access
PDF file
RKRaushan Kaiynbayeva
Raushan Kaiynbayeva
RCRaisa Chernyakovа
Raisa Chernyakovа
GSGita Sultanbayeva
Gita Sultanbayeva
NKNazym Kozhabekova
Nazym Kozhabekova
UJUmurzak Jusipbekov
Umurzak Jusipbekov
ETErsin Tussupkaliyev
Ersin Tussupkaliyev
The most promising method for the purification of concentrated technical sulfuric acid is the purification sorption method, which is the most effective and innovative, using a natural sorbent. Study of the process of sorption of iron and copper cations from concentrated technical sulfuric acid by a natural zeolite. The specific surface area of the zeolite isolated from reactive sulfuric acid is 4.781 m2/g. The true absorption volume in the zeolite after the purification of sulfuric acid decreases to a value of 147.0068 mL/g for a zeolite sample. The adsorption pore volume for the zeolite after the acid purification calculated from the obtained results is 0.229 mL/g. The physicochemical methods of analysis (NGR, IR, X-ray diffraction, DTA, porosimetry, electron microscopy) and chemical methods revealed that in concentrated sulfuric acid the Fe–O bonds of octahedrons and SiO bonds of tetrahedrons of the zeolite framework are stable. The sorption process was carried out under conditions of a room temperature of T = 25 °C, the ratio “zeolite: H2SO4” of 10:100, and a process time of 5–50 min. The specified concentration of the Fe and Cu cations was created by introducing the calculated amount of FeSO4·7H2O and CuSO4·5H2O, in order to identify the patterns of the sorption process of copper and iron in their joint presence (CFe > CCu; CFe = CCu). The regularities of sorption of iron and copper cations by zeolite in their joint presence on the model system “H2SO4–zeolite–Fe–Cu” were studied and selective sorption capacity of zeolite with respect to iron cations was revealed. The maximum degree of sorption of iron cations in concentrated sulfuric acid is achieved in 10–15 min and makes up 95% and that of copper 30.6%. The process of iron sorption from sulfuric acid occurs according to the types of ion isomorphism and ion exchange, as indicated by a very high number of sorbed Fe ions and the absence of their release (desorption) from the zeolite into the solution. The Cu cations are sorbed by zeolite from acid by the ion exchange method, which is confirmed by the physicochemical analysis methods.