The global reliance on fossil fuels, particularly natural gas, underscores the urgency of developing sustainable methods for methane (CH4) and carbon dioxide (CO2) conversion. Methane, which constitutes 95% of natural gas, is a critical feedstock and fuel source. However, its high bond dissociation energy and volatility pose challenges for large-scale utilization and transport. Current research emphasizes the catalytic and plasma-assisted conversion of CH4 and CO2 into value-added products such as methanol, higher hydrocarbons, and organic oxygenates. Advancements in these technologies aim to overcome obstacles such as high operating temperatures, coking, and low product selectivity while addressing methane’s environmental impact, as leakage during extraction and distribution significantly contributes to global warming. Plasma-assisted conversion has emerged as a promising approach, leveraging electron impact processes to generate reactive species that facilitate CH4 and CO2 transformation at near-room temperatures. The integration of catalysts within plasma environments enhances reaction pathways, product yields, and selectivity by modifying plasma properties and surface interactions. This review comprehensively discusses the various methods investigated for CH4 conversion and energy efficiency. We attempt to highlight the recent progress in plasma-assisted catalytic processes for CH4 and CO2 valorization, with a focus on the mechanisms of product formation, catalyst modifications, and their impact on plasma discharge characteristics. The insights gained could pave the way for scalable, energy-efficient solutions to produce sustainable fuels and chemicals, thereby contributing to global efforts in carbon cycle fixation and climate change mitigation.
Non-thermal plasma (NTP)-assisted material synthesis and surface modification provide a promising approach in various applications, particularly in wastewater treatment. In this study, we reported the synthesis of photocatalytic zinc oxide (ZnO) from zinc hydroxide (Zn(OH)2) utilizing NTP discharge generated by dielectric barrier discharge (DBD). The results demonstrated that the 40 min plasma treatment at 200 °C (ZnO-P) with a voltage of 20 kV significantly improved the material’s physicochemical properties compared to conventional calcination at 600 °C (ZnO-600). ZnO-P exhibited better crystallinity, a significantly reduced particle size of 41 nm, and a narrower band gap of 3.1 eV compared to ZnO-600. Photocatalytic performance was evaluated through crystal violet degradation, where ZnO-P achieved an 60% degradation rate after 90 min of UV exposure, whereas ZnO-600 exhibited only a 50% degradation rate under identical conditions. These findings underscore the effectiveness of NTP synthesis in enhancing the surface properties of ZnO, leading to superior photocatalytic performance.
The win–win situation of dye degradation and nitrogen fixation in wastewater using non-thermal plasma (NTP) were investigated in this study. Specifically, the feasibility of utilizing plasma-treated dye-contaminated wastewater for seed germination and plant growth was explored. Crystal Violet (CV) and Rhodamine B (RhB) dyes were used as model pollutants, while Sorghum bicolor (great millet) seeds were used to assess germination rates and plant growth responses. In untreated wastewater containing CV and RhB, approximately 45% of seeds germinated after three days, but no significant stem or root growth was observed after 11 days. Plasma treatment significantly enhanced dye degradation, with efficiency improving as treatment time and input power increased. After 16 min of plasma treatment at 1.3 ± 0.2 W input power, about 99% degradation efficiency was achieved for both CV (0.0122 mM) and RhB (0.0104 mM). This degradation was primarily driven by reactive oxygen and nitrogen species (RONS) generated by plasma discharge. When sorghum seeds were germinated using plasma-treated wastewater, the germination rate increased to 65% after three days—20% higher than with untreated wastewater. Furthermore, after 11 days, the average stem length reached 9 cm, while the average root length extended to 7 cm. These findings highlight NTP as a promising and sustainable method for degrading textile industry pollutants while simultaneously enhancing crop productivity through the reuse of treated wastewater.