Ronghua Guo

Dr. Ronghua Guo

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 January 2025 in IEEE Transactions on Intelligent Transportation Systems
Verified
Journal Article
Closed access
DBDan Bao
Dan Bao
RGRonghua Guo
Ronghua Guo
A novel intelligent reflecting surface (IRS) aided dual-function radar-communication (DFRC) system is proposed in this paper. IRSs are not only used to improve communication channels, but also employed as cooperative intelligent targets to enhance some objects of interest, such as vehicles and pedestrians in an intelligent transportation system. The optimal design objective function is to maximize the radar performance, while keeping the communication rate constant. The measure of radar performance is the Cramér–Rao bound (CRB) of the direction of departure (DOD), which is a special capability of a collocated antenna array multiple input multiple output (MIMO) radar. The joint optimization process comprises two steps, namely the passive optimization of IRSs and the active transmit beamforming. Due to the non-convexity of the optimization problem, a solver based on semidefinite relaxation (SDR) is proposed. Simulation experiments show the ability of the proposed optimization algorithm to balance the radar performance and the communication rate.

29 January 2024 in Remote Sensing
Verified
Journal Article
Open access
PDF file
RGRonghua Guo
Ronghua Guo
YDYang-Yang Dong
Yang-Yang Dong
LZLidong Zhang
Lidong Zhang
CDChunxi Dong
Chunxi Dong
DBDan Bao
Dan Bao
ZLZhiyuan Li
Zhiyuan Li
When radar receivers adopt digital channelization, it is prone to generating a cross-channel split signal, the rabbit ear effect, and a transition band repeated signal, leading to errors in radar signal sorting or identification. The pulse-splitting model and detection method proposed in this paper can model split pulses and identify them in radar pulse streams, facilitating the merging of split pulses to enhance sorting and identification performance. Firstly, the mechanism of splitting pulse generation is deeply analyzed, and the splitting site theory is proposed. Then, the split pulse signal model and the split pulse number statistical model based on geometric distribution are constructed, which are used to guide the construction of simulation data of split pulse flow with different characteristics. Furthermore, a time-domain convergence degree (TCD) index is proposed to characterize the pulse split phenomenon. At the same time, in order to avoid a large number of threshold searching problems in pulse-splitting detection, an empirical formula for the pulse-splitting detection threshold based on the TCD is given to quickly determine whether there is a pulse train split problem. The selected measured radar pulse stream is verified to follow a geometric distribution at a significance level of 0.05. The proposed method achieved a detection accuracy of at least 99.55% on the simulation dataset and at least 95.68% on the experimental dataset, validating the rationality of pulse-splitting modeling and the effectiveness of the detection method.

17 March 2025 in Remote Sensing
Verified
Journal Article
Open access
PDF file
ZLZhiyuan Li
Zhiyuan Li
XFXuan Fu
Xuan Fu
CMChengjian Mo
Chengjian Mo
JTJianlong Tang
Jianlong Tang
RGRonghua Guo
Ronghua Guo
WLWenbo Li
Wenbo Li
Multi-function radar (MFR) work modes recognition is an important research component of the electronic reconnaissance field. When facing MFR systems equipped with complex mode-waveform mapping relationships and flexible beam scanning techniques, the intercepted work mode pulse sequences have a wide temporal range of feature distributions and variable durations, which bring significant challenges for accurate recognition. To address this issue, this study constructs a novel hierarchical MFR signal model with waveform multiplexing and waveform scheduling laws with spatial beam arrangement and proposes a work mode recognition method based on dual-scale feature extraction. The recognition method first obtains the variable-length sequence processing capability through pulse sequence segmentation. Then, a structure composed of convolutional neural network (CNN) and long short-term memory (LSTM) is followed to extract the deep time-series features at the internal-segment scale of segments, and the features of each segment are concatenated in the time dimension. Subsequently, an LSTM-Attention network is used to extract the external-segment-scale features while adaptively assigning a higher weight to important waveform segments. Ultimately, the work mode recognition results are obtained. The experimental results show that the proposed method’s performance is advantageous in recognizing work modes under the comprehensive MFR signal model.

1 May 2025 in IEEE Transactions on Aerospace and Electronic Systems
Verified
Journal Article
Closed access
DBDan Bao
Dan Bao
RGRonghua Guo
Ronghua Guo
In this correspondence, a joint direction of departure (DOD) and direction of arrival (DOA) estimation method is proposed for a wideband multiple-input multiple-output (MIMO) system with orthogonal frequency division multiplexing (OFDM). In a wideband array system, the envelope-misalignment effect of signals on different array elements is unneglectable. To deal with this problem, the theoretical channel response of the wideband system for joint DOA and DOD estimation is given. Then, a coherent accumulation method to reconstruct a two-dimensional sinusoidal model following range compression is proposed, which simplifies the wideband array response to a narrow-band array representation. The range migration effect among transmit and receiving antenna pairs of the wideband array is eliminated. A theoretical deduction is present to prove the correctness of this method. The proposed algorithm is capable of sparsifying the dense targets, is highly computationally efficient, and is good at increasing the signal-tonoise ratio. The joint DOA and DOD estimation performance is also verified by numerical experiments

11 November 2025 in IEEE Transactions on Neural Networks and Learning Systems
Verified
Journal Article
Open access
WLWenbo Li
Wenbo Li
YDYang-Yang Dong
Yang-Yang Dong
CDChunxi Dong
Chunxi Dong
TSTing Sun
Ting Sun
RGRonghua Guo
Ronghua Guo
ZLZhiyuan Li
Zhiyuan Li
Deinterleaving radar signals is a significant task in contemporary electronic warfare reconnaissance. However, as adaptive waveforms and multifunctional radar technologies evolve, the dynamic range of signal parameters broadens and modulation styles diversify, resulting in critical performance bottlenecks for single-feature deinterleaving algorithms. Therefore, this article explores a novel intelligent deinterleaving paradigm that fuses multidimensional signal properties. A radar signal deinterleaving method based on the multiscale attention mechanism, Multiscale attention deinterleaving (MSAD), is proposed to address issues like how to depict the multidomain coupling characteristics of radar signals, how to model the contribution differences of features at different scales, and how to improve the generalization ability of algorithms for complex modulated signals. The approach first expands the dimensionality of the pulse description word (PDW) data, which is then converted using a Gramian angular field (GAF) into a pulse description graph (PDG). This allows for the joint graphical description of multidimensional characteristics that include time, frequency, space, and energy. Next, build a Laplace Pyramid multiscale feature extraction framework and employ deep convolutional networks (DCNs) to hierarchically capture signal patterns at various granularities. Last, a physically interpretable deinterleaving decision is created by dynamically fusing the feature weights of each scale using the attention mechanism (AM). According to experiments, the MSAD method outperforms the current approaches [bidirectional long short-term memory (BLSTM), bidirectional gated recurrent unit (BGRU), DCN, sequential difference histogram (SDIF), and pulse repetition interval transform (PRI-Tran)] in deinterleaving by taking advantage of the enhancement effect of multiscale image representations on electromagnetic signal features and the dynamic weight assignment by the AM. In addition, in multifunctional radar and jittered PRI deinterleaving, the MSAD approach demonstrates competitive performance gains.

9 October 2025 in IEEE Transactions on Aerospace and Electronic Systems
Verified
Journal Article
Closed access
RGRonghua Guo
Ronghua Guo
YDYang-Yang Dong
Yang-Yang Dong
DBDan Bao
Dan Bao
CDChunxi Dong
Chunxi Dong
SVSergio Vitale
Sergio Vitale
ZLZhiyuan Li
Zhiyuan Li
In modern battlefields, the electromagnetic environment is complex and changeable, and radar detection and acquisition equipment perform unstably. This often causes pulse splitting in the received pulse stream. As a result, the corresponding data stream shows arbitrary statistical distribution and contains many outliers, leading to errors in signal sorting or identification. To address this problem, a split pulse fusion method for radar reconnaissance is proposed. Firstly, the split pulse fusion algorithm model is constructed, and the pulse is simplified to time point. Then, combining with the idea of robust statistics, a pulse time point clustering algorithm (PTPC) is proposed, and the optimal number of range gates is calculated by fast estimation of the complete pulse flow timing position. Subsequently, the fusion pulse descriptor word (PDW) stream is generated by updating the candidate neighborhood radius, and the fusion result is optimized according to the pulse fusion index. The simulation results show that the proposed method has better performance than the baseline methods in most scenarios with pulse flow characteristic changes, which verifies the stability and superiority of the proposed method.