In this work; resistive moisture sensors were obtained by dip coating sulfonated polycarbonate (SPC) onto silver interdigitated electrodes. Commercial polycarbonate was sulfonated with acetyl sulphate at two different sulfonation degrees corresponding to 9.0 and 18.0 mole %. Impedance spectroscopy was used to investigate the humidity sensing properties at controlled relative humidity (RH%) environments generated from standard saline solutions in the range of 11–90 RH%. For the highest sulfonated sample; in the RH% range investigated (11 to 90%); the sensor impedance changed from 4.7 MΩ to 18 kΩ. Humidity sensors made from sulfonated polycarbonate showed exponential decay behavior of the impedance at constant frequency with the environmental relative humidity. Sample 9SPC presented dielectric relaxation response for environmental humidity between 58 and 90 RH% while sample 18SPC presented dielectric relaxation response for the entire measured range between 11 and 90 RH%. Sulfonated polycarbonate could be a promising material for the fabrication of simple and cheap humidity-sensing sensors for the assessment of relative humidity of the surrounding environment, as suggested by experimental results.

The synthesis of ten novel mesoionic 4‐[para‐substituted (H, CH₃, OCH₃, NO₂, Cl, Br, OH, t‐C₄H₉, C₆H₅, C₄H₉) phenyl‐5‐2,4‐dichlorophenyl]‐1,3‐4‐thiadiazolium‐2‐aminides, as hydrochlorides, are described. The synthesis strategy utilized the corresponding para‐substituted isothiocyanates as starting materials to obtain the thiosemicarbazides through reaction with phenylhydrazine (61–98%), which were then submitted to acylation with 2,4‐dichloro benzoyl chloride and direct cyclization to generate the desired substituted mesoionic compounds in good yields (ca. 80%).

This paper presents a revision of the history, definitions, and classification of tracers (natural and artificial, internal and external). The fundamental ideas concerning tracers are described, followed by their application illustrated by typical examples. The advantages and disadvantages of five classes among the most frequently used external tracers (fluorescent, microbial, chemical, radioactive and activable isotopes) are also described in detail. This review also presents some interesting and modern applications of tracers in the areas of diagnostics in medical practice, environmental pollution, hydrology and petroleum chemistry