Permanent‐magnet synchronous motor (PMSM) is a nonlinear, multivariate, strongly coupled system with uncertain external interference. A general control method cannot meet system requirements. This study proposes an optimal control strategy based on active disturbance rejection control (ADRC) to achieve high‐precision control of PMSM. First, interpolation fitting is used to construct a nonlinear function with improved continuity and derivative near the origin and segment points. Second, various components of active disturbance rejection control are constructed based on the new nonlinear function, which mainly improves the extended state observer and nonlinear state error feedback. Simulation results show that under similar parameters, the improved active disturbance rejection control has smaller overshoot, faster tracking capacity, and stronger anti‐interference capability compared with traditional active disturbance rejection control. Finally, the optimized active disturbance rejection control is used in the motion control system of PMSM. Experimental results show that the proposed optimal control strategy is simple and has good control performance.
With the rapid advancement of intelligent driving technology, multi-source information fusion has become a vital topic in the field of environmental perception. To address the fusion deviation resulting from changes in sensor performance due to environmental variations, this paper proposes a multi-source information fusion algorithm based on the improved Sage-Husa adaptive extended Kalman filtering (SHAEKF) algorithm. First, a multi-source information fusion system is constructed based on the vehicle kinematic model and the sensor measurement model. Then, the Sage-Husa adaptive fading extended Kalman filtering (SHAFEKF) algorithm is constructed by introducing a fading factor into the SHAEKF algorithm to enhance the influence of newly incoming data. Finally, the experimental results indicate that the positional average errors of the algorithm in the two scenarios are 0.137 and 0.071. When compared to the SHAEKF algorithm, the positional average errors have been reduced by 2.8% and 13.4%, while the mean squared errors have decreased by 64% and 72%. This demonstrates that the SHAFEKF algorithm offers high accuracy and low fluctuation, enhancing its adaptability in multi-source information fusion systems.
9 July 2025 in Transactions of the Institute of Measurement and Control
With the rapid advancement of intelligent driving technology, multi-source information fusion has emerged as a critical focus in environmental perception research. This technology not only reliably captures environmental data across diverse conditions but also enables cross-sensor data complementarity. To address the fusion deviation resulting from changes in sensor performance due to environmental variations, this paper proposes a multi-source information fusion system utilizing the Sage-Husa adaptive extended Kalman filtering (SHAEKF) algorithm. First, we construct a multi-source information fusion system grounded in vehicle motion models. Then, a fading factor is incorporated into the SHAEKF algorithm, such that the estimation error is effectively reduced and the risk of filter divergence is mitigated. Finally, a dynamic threshold fault-tolerance module is proposed based on Euclidean distance and motion equations to identify and eliminate erroneous sensor information. Based on a series of simulation experiments, the improved SHAEKF algorithm demonstrates higher estimation accuracy and robustness than the original SHAEKF algorithm.
9 October 2025 in Transactions of the Institute of Measurement and Control
Blind zone environments cause collision risks for autonomous vehicles (AVs), and how to achieve safe and efficient blind zone passing is an important challenge. In this paper, a longitudinal motion control strategy based on the spatio-temporal risk prediction (STRP) and model predictive control (MPC) algorithm, named MPC-STRP, is investigated for AVs in the blind zone. Before detecting the obstacle in the blind zone, the concept of virtual obstacle is proposed, and its corresponding spatio-temporal risk field is established. Upon detection of the obstacle, the real obstacle spatio-temporal risk field is established to replace the virtual one. On the basis of the spatio-temporal risk field and the obstacle motion model, the STRP is developed to characterize the risks that exist in the blind zone in a future period. The longitudinal motion controller is comprised of an upper-level controller that employs the MPC-STRP to determine the optimal longitudinal acceleration, and a lower-level controller that calculates the torque at the front and rear wheels. The simulation results demonstrate that the longitudinal control strategy based on MPC-STRP proposed in this paper can effectively ensure the safety of the AV when passing through the blind zone while maintaining the passing efficiency and comfort.