Zhizhou Xu

Zhizhou Xu


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 March 2025 in Processes
Verified
Journal Article
Open access
PDF file
HCHongjie Chen
Hongjie Chen
BCBingxu Chen
Bingxu Chen
ZXZhizhou Xu
Zhizhou Xu
JGJing Ge
Jing Ge
HCHonghua Chen
Honghua Chen
ZZZhaoqi Zhong
Zhaoqi Zhong
Improving the efficiency of ejectors during off-design operations can be effectively achieved through the automatic adjustment of the nozzle exit position (NXP). A thermodynamic model for predicting the performance of an ejector with an adjustable nozzle position is proposed and validated. The key factors influencing the optimal nozzle exit position under variable operating conditions are analyzed using the model. The dimensionless optimal nozzle exit position (DONXP) of the ejector is fitted as a function of these key factors, and a nozzle exit position adjustment scheme for variable operating conditions is further derived. The proposed model has maximum errors in the entrainment ratio, critical back pressure, and nozzle exit position within ±10.70%, ±7%, and ±15.85%, respectively. When the area ratio increases, with the transition point located in the mixing chamber, the increase rates of the DONXP are within 0.068~0.195 for the R245fa, R600a, R141b, and R134a ejectors. However, when the transition point is located before the entrance of the mixing chamber, the increase rates are within 0.0009~0.0034. When the area ratio is fixed, the larger the expansion ratio, the smaller the DONXP. The DONXP can be fitted according to different cases where the turning point is located either before or after the entrance of the mixing chamber, to meet the demand for automatic adjustment of the nozzle exit position.

22 October 2024 in Entropy
Verified
Journal Article
Open access
PDF file
HCHongjie Chen
Hongjie Chen
JGJing Ge
Jing Ge
ZXZhizhou Xu
Zhizhou Xu
Being the core of the ejector refrigeration system, an ejector with a suitable mixer, conical–cylindrical or cylindrical, is key to high-energy-efficiency and low-carbon systems. To promote the scientific selection of mixers for ejectors based on the theoretical models that have been validated by experiments, the evolution laws of the entrainment ratios in the two types of ejectors are studied under various operating conditions. Furthermore, the influence mechanism of the mixer structures on the entrainment ratio of the ejector is elucidated by comparing the distribution characteristics of the entropy generation rate, pressure lift proportion, and entropy generation rate of the per-unit pressure lift in the two types of ejectors. The efficiencies of the conical-cylindrical mixer ejector and cylindrical mixer ejector exist a crossover, which makes the entrainment ratio of the conical–cylindrical mixer ejector smaller under small compression ratios but larger under large compression ratios. By changing the cylindrical mixer into a conical one, on the one hand, more pressure rise will be distributed in the diffuser, which helps to reduce the entropy increase rate in the pressurization process; on the other hand, the wall impulse effect of the conical mixer will lead to an increase in entropy generation rate of per-unit pressure lift, resulting in a growing entropy generation rate of boosting. The dominant roles are not the same with changing compression ratios, which leads to different relationships of entrainment ratio between the cylindrical and conical mixer ejectors.

23 November 2025 in Processes
Verified
Journal Article
Open access
PDF file
BCBingxu Chen
Bingxu Chen
HCHongjie Chen
Hongjie Chen
ZXZhizhou Xu
Zhizhou Xu
WLWenfeng Liang
Wenfeng Liang
HHHaishen Huang
Haishen Huang
LXLin Xia
Lin Xia
A distillation system with an ejector for secondary steam utilization can effectively improve energy efficiency. However, the poor performance of the ejector under varying operating conditions makes it difficult for the distillation system to adapt to wide-range operational requirements. To address this challenge, a distillation system using a combined ejector with staged and continuous adjustment is proposed, and its performance and economic feasibility under wide load conditions is analyzed. The results show that when a combined ejector is used—composed of four fixed-structure ejectors with capacities of 6.25%, 12.5%, 25%, and 50%, along with a nozzle needle-adjustable ejector with a capacity range of 0–6.25%—the distillation system can combine the advantages of both staged and continuous adjustment. This system can utilize secondary steam across a load range of 2.53–100%, whereas a distillation system with a single continuously adjustable ejector can only utilize secondary steam within a load range of 40.5–100%. As the load varies from 0 to 100%, the proposed system achieves an average entrainment ratio of 0.525, with an efficiency not less than 50% of the design value over 95.23% of the range. In contrast, the conventional single continuously adjustable ejector has an average entrainment ratio of 0.177, and the distillation system efficiency remains above 50% of the design value for only 25.32% of the range. In a solar-assisted distillation system, the combined ejector improves the coefficient of performance (COP) by over 30%, with a payback period of less than one year. The findings highlight the system’s superior adaptability, efficiency, and economic viability for applications with unstable energy supply.