The main components responsible for the mechanical behavior of the arterial wall are collagen, elastin, and smooth muscle cells (SMCs) in the medial layer. We determined the structural and mechanical changes in porcine carotid arteries after administration of Triton® X-100, elastase, and collagenase using the inflation-deflation test. The arteries were intraluminarly pressurized from 0 to 200 mmHg, and the outer diameter of the artery was measured. The pressure-strain elastic modulus was determined based on the pressure/diameter ratio. The intima-media thickness, wall thickness, thickness of the tunica adventitia layer, and the area fractions of SMCs, elastin, and collagen within the arterial wall (A(A)(SMC/elastin/collagen, wall)) were measured using stereological methods. The relative changes in the relevant components of the treated samples were as follows: the decrease in A(A)(SMC, wall) after administration of Triton® X-100 was 11% ± 7%, the decrease in A(A)(elastin, wall) after administration of elastase was 40% ± 22%, and the decrease in A(A)(collagen, wall) after the application of collagenase was 51% ± 22%. The Triton® X-100 treatment led to a decrease in the SMC content that was associated with enlargement of the arterial wall (outer diameter) for pressures up to 120 mmHg, and with mechanical stiffening of the arterial wall at higher pressures. Elastase led to a decrease in the elastin content that was associated with enlargement of the arterial wall, but not with stiffening or softening. Collagenase led to a decrease in collagen content that was associated with a change in the stiffness of the arterial wall, although the exact contribution of mechanical loading and the duration of treatment (enlargement) could not be quantified.
Objective: The perineal body connects muscles from the pelvic floor and is critical for support of the lower part of the vagina and proper function of the anal canal. We determined mechanical parameters and volume fractions of main components of the human female postmenopausal perineal body. Methods: The specimens were taken from 15 fresh female cadavers (age 74 ± 10, mean ± standard deviation). Seventy-five specimens from five regions of the perineal body were processed histologically to assess volume fractions of tissue components using stereological point testing grid. Fifteen specimens taken from the midline region were loaded uniaxially with 6 mm/min velocity until tissue rupture to determine Young's modulus of elasticity, ultimate stresses, and strains. Results: The perineal body was composed of collagen (29%), adipose cells (27%), elastin (7%), smooth muscle (11%), and skeletal muscle (3%). The residual tissue (19%) constituted mostly peripheral nerves, lumina of blood vessels, fibroblasts, and fibrocytes. Young's modulus of elasticity at midline region was 18 kPa (median) at small and 232 kPa at large deformations, respectively. The ultimate stress was 172 kPa and the ultimate strain was 1.4. Conclusions: We determined the structural and mechanical parameters of the perineal body. The resultant data could be used as input for models simulating pelvic floor prolapse or dysfunction.
20 July 2014 in Biomechanics and Modeling in Mechanobiology
AIMS: This work focuses on the morphological and mechanical changes in the wall of the subrenal aorta in rats suffering from arterial hypertension and chronic renal failure induced by subtotal nephrectomy (NX). METHODS: The quantitative struct...