Aliakbar Dastranj

Dr. Aliakbar Dastranj


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 January 2017 in IEEE Antennas and Propagation Magazine
Verified
Journal Article
Closed access
ADAliakbar Dastranj
Aliakbar Dastranj
This article presents a general approach to design and optimize printed ultrawideband (UWB) antennas by using invasive weed optimization (IWO), a well-known global optimization algorithm. To achieve the required radiation parameters over a wide bandwidth, a frequency-related cost function with optimal weighting coefficients is suggested. Two prototypes of the optimized antenna have been manufactured and examined. The experimental outcomes show good agreement with the simulated ones that validate the proposed optimization approach. The optimized antenna has a compact size of 50 mm × 50 mm. The operational bandwidth of the antenna for S11 <; -10 dB, from both measurement and simulation, is 150%, based on the center frequency of 6.4 GHz (1.6-11.2 GHz), which also covers the UWB (3.1-10.6 GHz) applications. The time-domain response of the antenna was also investigated by measurement of the group delay. Finally, the efficiency of the optimized antenna in terms of bandwidth, size, and gain are compared with a number of previously proposed designs. Comparison results show that the optimized antenna outperforms other designs cited. The experimental outcomes in frequency as well as the time domain show that the antenna is suitable for use in UWB or other communication systems.

1 December 2015 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
ADAliakbar Dastranj
Aliakbar Dastranj
A modified broadband antipodal Vivaldi antenna for the operating frequency range of 6–18 GHz is presented. In order to eliminate diffraction from sharp ends, the corners of the patches are rounded. As a result, both the gain and directivity are improved. Moreover, one major addition that is done to the antenna is the background plane. The purpose of the backplane, which is made of metal, is to reflect any radiation going in a direction opposite to that of the required. This would then effectively increase the forward radiation, thus contributing to the gain of the antenna structure. In addition to be small in size, the designed antenna exhibits stable radiation patterns over the entire operating bandwidth, relatively high gain of 7–8.4 dB, and low cross‐polarisation. A prototype of the modified antenna is fabricated and verified experimentally. The measured results are in reasonable agreement with the simulation data. Based on the obtained results, the designed antenna can be useful for broadband applications.

27 February 2017 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
ADAliakbar Dastranj
Aliakbar Dastranj
A compact and broadband printed monopole antenna (PMA) with a hybrid trapezoidal–elliptical radiator is proposed. An overlap region between the trapezoidal and elliptical patches is introduced to enhance the impedance bandwidth. Meanwhile, by etching two symmetrical quarter‐elliptical slots on the ground plane and optimising the ellipticity ratio, further improvement in the impedance bandwidth is achieved. Measured results show that the antenna can cover the frequency range of 2.4–18.6 GHz (| S 11 | < −10 dB) while its total size is only 25 × 25 × 1.2 mm 3 . In addition, omnidirectional radiation patterns, desirable gain, high radiation efficiency and nearly constant group delay are obtained. Compared with recent PMAs, the proposed antenna has a smaller size and wider bandwidth, simultaneously.

11 July 2017 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
ADAliakbar Dastranj
Aliakbar Dastranj
A low‐profile single‐layer printed dual‐port antenna with high isolation is presented for broadband polarisation diversity applications. The proposed antenna comprises a pair of the same monopoles that are orthogonally fed by two coplanar waveguide lines. Each monopole consists of a hexagonal radiator and a staircase‐like ground plane. To accomplish a wideband polarisation diversity performance with a compact size, the geometrical parameters of the radiator and ground plane were optimised by using Ansoft HFSS. The designed antenna with the total area of 25 × 50 mm 2 was fabricated and tested. Measured results show that the antenna covers the frequency ranges of 2.4–17.1 and 2.6–16.8 GHz (| S 11 | and | S 22 | < −10 dB), for ports 1 and 2, respectively. Also, the isolation between the two ports is better than 25 dB over the entire working band. The proposed antenna features not only nearly omnidirectional radiation patterns, but also reasonable gain and radiation efficiency. Besides, the envelope correlation coefficient reveals a good diversity performance across the whole bandwidth. Finally, the distortionless time‐domain performance of the antenna is verified by measurement of the group delay. The experimental results in both frequency and time domain show the suitability of the antenna for broadband dual‐polarised applications.

6 May 2018 in Journal of Electromagnetic Waves and Applications
Verified
Journal Article
Closed access
ADAliakbar Dastranj
Aliakbar Dastranj
A broadband microstrip-fed modified printed bow-tie antenna is proposed. Using a rounded ground plane, adding a pair of circular patches to the bow-tie arms, and optimizing the design parameters, an operation frequency band of 3.3–15.2 GHz is achieved. The development stages of the modified bow-tie radiator is exhibited and it is shown that by designing different antenna structures, the impedance bandwidth (defined by –10-dB reflection coefficient) can be improved from 37% to more than 128%. The modified antenna possesses advantages of not only a broad bandwidth of 128%, but also a small size of 34 × 34 × 1.2 mm3. The designed antenna was fabricated and tested. The impedance matching, group delay, and the antenna radiation characteristics, including co-polarized far-field patterns, cross-polarized patterns, radiation efficiency, and gain were analyzed with numerical simulation and experimental measurement. Measured data are in good agreement with the simulated results. Based on the obtained frequency- and time-domain characteristics, the designed antenna is an attractive candidate for broadband communication applications.

1 January 2020 in Progress In Electromagnetics Research M
Verified
Journal Article
Open access
PDF file
ADAliakbar Dastranj
Aliakbar Dastranj
FBFaezeh Bahmanzadeh
Faezeh Bahmanzadeh
This paper presents a technique to design a very small planar antenna for ultra-wideband (UWB) communication applications. To cover UWB frequency range by a small-size antenna, the ground plane influence on the antenna impedance bandwidth is suppressed at middle and higher frequencies. To accomplish this purpose, a rectangular and several stepped slots are etched on the conventional radiator. Also, a tuning stub is printed in the rectangular slot, and its length is optimized. This technique decreases current distribution on the ground plane at higher frequencies, and the impedance matching of the antenna is significantly influenced by the radiating patch. The antenna has a compact size of 25 × 25 × 1.6 mm 3. It can provide a wide impedance bandwidth from 2.8 to 15.4 GHz (|S 11 | <-10 dB) which covers the entire UWB spectrum (3.1-10.6 GHz). Two prototypes of the antenna were fabricated and measured. The impedance matching, group delay, fidelity factor, and the antenna radiation characteristics, including co-and cross-polarized far-field patterns and realized gain were analyzed with numerical simulation and experimental measurement. Measured data are in good agreement with the simulated ones. Based on the obtained frequency-and time-domain characteristics, the designed antenna is an excellent candidate for UWB wireless devices.