GIS-AHP framework for Northeastern Bangladesh integrates 19 indicators to prioritize flood risk. It identifies Sunamganj and Sylhet as high-priority zones, supporting Sendai Framework resilience planning. Flood risk assessments in monsoon-dominated, data-scarce regions often emphasize physical susceptibility while insufficiently integrating exposure and vulnerability, limiting actionable risk prioritization. This study develops a validated flood risk prioritization index (FRPI) for northeastern Bangladesh (Sylhet Division) using a geographical information system-based analytic hierarchy process (AHP) framework that integrates 19 geospatial indicators across susceptibility (9 parameters), exposure (5 parameters), and vulnerability (5 parameters). Flood susceptibility was evaluated using independent flood inventories from June 2022 and June 2024 through zonal overlay and receiver operating characteristic-area under the curve (AUC) analysis, yielding strong predictive performance (AUC = 0.836 and 0.794). A one-at-a-time sensitivity analysis across 114 perturbation scenarios demonstrated high stability (κ > 0.94). By combining multidimensional risk components within a unified structure, incorporating exposure proxies such as nighttime light intensity and critical infrastructure density, and implementing temporal validation with uncertainty assessment, the framework advances conventional AHP-based flood mapping approaches. Results identify Sunamganj and Sylhet districts as the highest priority zones, with over 72% and 42% of land classified as high to very high risk, respectively. The FRPI is scalable and transferable, supporting data-driven flood risk governance and resilience planning across transboundary, data-scarce basins, aligning with the Sendai Framework's aim of enhancing localized flood risk intelligence.
Torsion failure poses a critical threat to the structural integrity of reinforced concrete, particularly in seismic hazard zones. This study aims to overcome this difficulty by conducting a thorough examination of the torsional characteristics of Reinforced Cement Concrete (RCC) beams. This study examined the torsional characteristics of various RCC beams by utilizing different configurations of shear reinforcements. The objective was to determine an effective alternative shear reinforcement configuration in comparison to the traditional Non-welded Rectangular Stirrup Beam (NRSB). Comparing three types of beams, namely NRSB, Welded Rectangular Stirrup Beam (WRSB), and Welded Warren Truss Beam (WWTB), a novel warren truss-shaped shear reinforcement was introduced. All beams were constructed with consistent dimensions of concrete and uniform weights of reinforcement, including 16 mm bars for the top and bottom longitudinal reinforcement and 10 mm bars as shear reinforcements. Two separate concrete mix ratios were evaluated, specifically 1:1.5:1.5 and 1:2.5:2.5 (by volume) respectively. Theoretical calculations based on elastic theory were used to determine the angle of twist for each beam. The torsional moment resistance of WRSB and WWTB was found to be 4.4% and 1% higher, respectively, compared to the traditional NRSB, while using a mix ratio of 1:1.5:1.5. Regarding the alternative mixture ratio, the torsional moment for WRSB was 10% more, whereas for WWTB it was 2.4% less. As a result, the WRSB specimens exhibited the highest torsional moment for both mix ratios, but the NRSB and WWTB specimens had comparable values.