Here, the single-target parameterization of alternatives to leading-edge noise is carried out using analytical models based on the Wiener–Hopf technique. Four leading-edge serration profiles with different frequencies, amplitudes, and phases are implemented to aid the understanding of sound suppression mechanisms. The effects of the serrated shape factor, wavelength, and amplitude are analyzed at tip-to-root ratios of 0.5, 1, and 2, respectively. An effective double-wavelength sinusoidal serration design can substantially reduce the noise emissions of 5.2 dB at = 2. Additionally, compared to single-wavelength serrations, an additional 1.47 dB noise reduction effect can be obtained by double-wavelength serrations under the appropriate design parameters. The surface pressure and phase distribution of different spanwise-varying leading edges indicate that the phase interference effect affected by source-radiated noise reduction is enhanced by this serration at the hills for serrations with a small curvature, and noise emission in the low-frequency band is more effectively suppressed. The sharper the serration is, the more conducive it is to a reduction in high-frequency noise. Nevertheless, the effectiveness of serrations is usually partially limited by the non-negligible trailing-edge self-noise. The sound source intensity of the root is decreased by the ogee-shaped serrations with a large curvature transition. A secondary noise reduction mechanism with a local source cut-off effect caused by nonlinearity is demonstrated.
1 November 2021 in Journal of Renewable and Sustainable Energy
The method of oscillating-foil energy extraction can be used to extract kinetic energy from the surrounding flow by a combined pitching and heaving motion of the foil. In order to improve the efficiency of energy extraction, a slotted foil with an active deflecting trailing-edge flap—inspired by the structure of the tail edge of bird wings—is designed. In this study, the unsteady Reynolds-averaged Navier–Stokes equation is solved to investigate the energy extraction performance of an oscillating foil at a Reynolds number of 5.0 × 105. In the numerical simulation, the dynamic overset mesh technology is used in order to ensure the accuracy and convergence of numerical solution. The effect of the deflecting motion of trailing-edge flaps on the efficiency of energy extraction is studied at a range of oscillating frequencies. In addition, the flow control mechanisms of slots on the oscillating foil are revealed by comparing the flow fields of the slotted foil and the NACA0015 foil. The result shows that active deflecting trailing-edge flaps can improve the efficiency of energy extraction over a wide range of oscillation frequencies. The active deflection of trailing-edge flaps increases the energy extraction efficiency of oscillating foils by 21.1% relative to conventional foils under a specific operating condition of oscillating frequency f* = 0.18. A detailed analysis of the flow fields indicates that the slot on the foil can suppress flow separation, while it has a negative effect on the attachment of leading-edge vortices. The deflecting trailing-edge flap enhances the heaving force. Therefore, the energy output and the efficiency of the oscillating foil are enhanced especially at the operating conditions of the oscillating foil without leading-edge vortex shedding.
This study aims to improve the energy extraction efficiency of flapping foils by using the retractable leading edge flaps (RLEFs). The effects of three parameters, including the designed rotation amplitude γ0, flap tail position dlef, and additional rotation angle γadd of RLEFs are studied at different reduced frequency f*. The usage of the RLEFs increases the effective contact area without increasing the sweep distance, improves the pressure difference near the leading edge, and delays the developments of the leading edge vortices on the flapping foil, resulting in the improvement of the energy extraction efficiency η at f* = 0.08–0.16. The optimal parameters are γ0 = 21°, dlef = 0.25c, and γadd = 0°, which helps the foil obtains a relative increase in 29.0% at f* = 0.08. A combined flap scheme using both RLEFs and the movable lateral flaps on the pressure side of the flapping foil is proposed. This scheme gets the highest η at f* = 0.08–0.14 among all the foils, and its maximum η is 44.9% at f* = 0.14, with a relative increase in 16.3%. Its maximum enhancement of η occurs at f* = 0.08, with a value of 33.6%, which is 41.3% higher than that of the conventional foil. It also forms a relatively stable high-efficiency region (η > 41.5%) at f* = 0.10–0.22.
As a bionic flow control structure, leading-edge serrations have been proven to effectively suppress the aerodynamic noise of airfoils. Compared with single-wavelength serrations, a greater noise reduction potential can be obtained for airfoils with the double-wavelength serrations because of the phase interference at different tip-to-root ratios. In this study, in order to reduce the aerodynamic noise of a flat plate operating in a steady uniform flow, double-wavelength leading-edge serrations based on Ayton’s analytical model are optimized by the meta-heuristic optimization algorithm. The effects of different double-wavelength serrations on the noise characteristics of the flat plate are investigated. By comparing and analyzing the radiation integral function and quantifying the sound pressure along the leading edge of the flat plate, the local source cut-off effect resulting from the large transition curvature of the root and phase difference superposition is analyzed in detail. The results show that, before the first inflection point, the convex sinusoidal and iron-shaped serrations can significantly reduce the aerodynamic noise of the flat plate. When the concave ogee-shaped serrations are adopted, the reduction of the high-frequency noise is more obviously. Especially when the slits are embedded at the roots of the optimized leading-edge serrated structures, the improved design further promotes an additional noise reduction level of 0.7 dB for the flat plate. Through numerical studies, the coupled noise reduction mechanism of the serration roots and the slits is also revealed.