Additive manufacturing (AM) has revolutionized the production of complex geometrical parts with metals; however, the usual layer-by-layer deposition results in poor surface quality and unpredictable surface integrity. Abrasive machining and finishing techniques play vital roles in counteracting these challenges and qualifying AM parts for practical applications. This review aims to present recent research developments concerning the machining of additively manufactured metal parts via both conventional and nonconventional abrasive machining methods. Conventional methods such as grinding, milling, polishing, honing, and sandblasting have been widely investigated for their ability to enhance the surface finish, dimensional accuracy, and mechanical properties of AM metal components. However, the characteristic features of various AM processes, such as porosity, microstructural features, and residual stresses, can significantly influence the machinability of the produced parts. Nonconventional methods such as abrasive flow machining, electrochemical machining, magnetic abrasive finishing, and vibratory bowl finishing, on the other hand, have shown potential in addressing the difficulties associated with internal machining geometries and hard-to-machine material combinations that are typical for many AM parts. This review also highlights some challenges and future trends in the machining of AM metal parts and emphasizes that further research is required in the direction of combinations of various postprocessing techniques, machinability regarding new alloy compositions, and the integration of AI for process optimization. As the demand for high-precision AM parts grows across various industries, the advancement of abrasive machining and finishing techniques is crucial for driving the wider adoption of AM technologies.
Experimental and modeling assessments have been conducted on the surface characteristics of SLS-printed polyamide lapping tools, considering the influence of three-body abrasion kinematics during machining of Al2O3 ceramic materials. Based on the radial axis profile and topography of segments, surface characteristics were assessed using 3D optical profilometers and minimum zone (MZ) techniques. Machining with counter-rotational kinematics exhibited larger surface shape error, resulting in an average maximum height (Wt) of 163.48 µm and pinpointing intense wear at a tool radius of 95 mm. Conversely, the highest wear with co-rotational kinematics resulted at a tool radius of 85 mm. Ceramic materials were improved by 64.74%, enhancing the initial spatial roughness Sa 1.73 µm to Sa 0.61 µm and resulting in near-zero skewness (Ssk) of surface height distribution with co-rotational kinematics. The three-body abrasion with counter-rotational kinematics resulted in 17.14% higher material removal than co-rotational kinematics. The tool-workpiece contact has been modeled considering the influence of the workpiece’s velocity and tangential acceleration along the active surface, and the findings confirmed experimental observations.