This study investigates the nonlinear dynamic response of the masonry bridge ‘Ponte delle Torri’ in Spoleto, aiming at assessing the seismic performance of the structure and evaluating the occurring damaging mechanisms. A 3D Finite Element (FE) macromechanical procedure implemented in the FE program FEAP is adopted to model the bridge. To reproduce the typical nonlinear microcracking process evolving in masonry material when subjected to external loads, an isotropic damage model is used. This is based on a scalar damage variable introduced in the stress-strain constitutive law and equally degrading all the components of the elastic constitutive operator. A nonlocal integral definition of the damage associated variable, that is the equivalent strain measure governing its evolution, is adopted to overcome the mesh dependency problems of the FE solution typically occurring in the presence of strain softening behavior. Based on the results of a recent study by some of the authors, a single equivalent pier is analyzed, whose geometry and boundary conditions are selected so that its response can provide useful information on the out-of-plane dynamic behavior of the overall bridge. To perform the seismic assessment, a set of recorded accelerograms is properly selected to simulate the seismic history of the Spoleto site. The nonlinear dynamic response of the structure is evaluated and monitored in terms of top displacement time history, evolution of the global damage index, and distribution of the damage variable. First, a set of analyses is performed by imposing the selected ground motions one by one on the initial undamaged configuration for the structure with the aim of emphasizing the damaging effects on its dynamic response. Then, the accelerograms are arranged in sequence to reproduce the seismic history of the site and analyze the influence of accumulated damage on the dynamic amplification of the response. A critical comparison of the bridge response to the sequence of accelerograms and the single records is made, and the interaction between the damaged structure dynamic response and the signal characteristic is highlighted, as well.
29 November 2023 in Computer Methods in Applied Mechanics and Engineering
An enhanced virtual element formulation for large displacement analyses is presented. Relying on the corotational approach, the nonlinear geometric effects are introduced by assuming nodal large displacements but small strains in the element. The element deformable behavior is analyzed with reference to the local system, corotating with the element during its motion. Then, the large displacement-induced nonlinearity is accounted for through the transformation matrices relating the local and global quantities. At the local level, the Virtual Element Method is adopted, proposing an enhanced procedure for strain interpolation within the element. The reliability of the proposed approach is explored through several benchmark tests by comparing the results with those evaluated by standard virtual elements, finite element formulations, and analytical solutions. The results prove that: (i) the corotational formulation can be efficiently used within the virtual element framework to account for geometric nonlinearity in the presence of large displacements and small strains; (ii) the adoption of enhanced polynomial approximation for the strain field in the virtual element avoids, in many cases, the need for ad-hoc stabilization procedures also in the nonlinear geometric framework.
12 July 2023 in European Journal of Mechanics - A/Solids