Silicon, germanium, and related alloys, which provide the leading materials platform of electronics, are extremely inefficient light emitters because of the indirect nature of their fundamental energy bandgap. This basic materials property has so far hindered the development of group-IV photonic active devices, including diode lasers, thereby significantly limiting our ability to integrate electronic and photonic functionalities at the chip level. Here we show that Ge nanomembranes (i.e., single-crystal sheets no more than a few tens of nanometers thick) can be used to overcome this materials limitation. Theoretical studies have predicted that tensile strain in Ge lowers the direct energy bandgap relative to the indirect one. We demonstrate that mechanically stressed nanomembranes allow for the introduction of sufficient biaxial tensile strain to transform Ge into a direct-bandgap material with strongly enhanced light-emission efficiency, capable of supporting population inversion as required for providing optical gain.
1 September 2017 in Reports on Progress in Physics
This paper reviews the device physics and technology of optoelectronic devices based on semiconductors of the GaN family, operating in the spectral regions from deep UV to Terahertz. Such devices include LEDs, lasers, detectors, electroabsorption modulators and devices based on intersubband transitions in AlGaN quantum wells (QWs). After a brief history of the development of the field, we describe how the unique crystal structure, chemical bonding, and resulting spontaneous and piezoelectric polarizations in heterostructures affect the design, fabrication and performance of devices based on these materials. The heteroepitaxial growth and the formation and role of extended defects are addressed. The role of the chemical bonding in the formation of metallic contacts to this class of materials is also addressed. A detailed discussion is then presented on potential origins of the high performance of blue LEDs and poorer performance of green LEDs (green gap), as well as of the efficiency reduction of both blue and green LEDs at high injection current (efficiency droop). The relatively poor performance of deep-UV LEDs based on AlGaN alloys and methods to address the materials issues responsible are similarly addressed. Other devices whose state-of-the-art performance and materials-related issues are reviewed include violet-blue lasers, ‘visible blind’ and ‘solar blind’ detectors based on photoconductive and photovoltaic designs, and electroabsorption modulators based on bulk GaN or GaN/AlGaN QWs. Finally, we describe the basic physics of intersubband transitions in AlGaN QWs, and their applications to near-infrared and terahertz devices.
Wide-bandgap semiconductors such as and quantum wells are promising for improving the spectral reach and high-temperature performance of terahertz quantum cascade lasers, due to their characteristically large optical phonon energies. Here, a particle-based Monte Carlo model is developed and used to quantify the potential of terahertz sources based on these materials relative to existing devices based on quantum wells. Specifically, three otherwise identical quantum cascade structures based on , , and quantum wells are designed, and their steady-state carrier distributions are then computed as a function of temperature. The simulation results show that the larger the optical phonon energies (as in going from the AlGaAs to the MgZnO to the AlGaN materials system), the weaker the temperature dependence of the population inversion. In particular, as the temperature is increased from , the population inversions are found to decrease by factors of 4.48, 1.50, and 1.25 for the AlGaAs, MgZnO, and AlGaN structure, respectively. Based on these results, the AlGaN and MgZnO devices are then predicted to be in principle capable of laser action without cryogenic cooling.
Due to their large optical phonon energies, nitride semiconductors are promising for the development of terahertz quantum cascade lasers with dramatically improved high-temperature performance relative to existing GaAs devices. Here, we present a rigorous Monte Carlo study of carrier dynamics in two structures based on the same design scheme for emission at , consisting of or quantum wells. The population inversion and hence the gain coefficient of the nitride device are found to exhibit a much weaker (by a factor of over 3) temperature dependence and to remain large enough for laser action even without cryogenic cooling.
The vision system of arthropods such as insects and crustaceans is based on the compound-eye architecture, consisting of a dense array of individual imaging elements (ommatidia) pointing along different directions. This arrangement is particularly attractive for imaging applications requiring extreme size miniaturization, wide-angle fields of view, and high sensitivity to motion. However, the implementation of cameras directly mimicking the eyes of common arthropods is complicated by their curved geometry. Here, we describe a lensless planar architecture, where each pixel of a standard image-sensor array is coated with an ensemble of metallic plasmonic nanostructures that only transmits light incident along a small geometrically-tunable distribution of angles. A set of near-infrared devices providing directional photodetection peaked at different angles is designed, fabricated, and tested. Computational imaging techniques are then employed to demonstrate the ability of these devices to reconstruct high-quality images of relatively complex objects.