The pore structure, high surface area and good conductivity are the key properties for the electrochemical double layer based supercapacitors. The activated carbons were produced from the waste tea, utilising microwave pretreatment with H3PO4 and activation at 450°C. Sodium thiosulfate pentahydrate (Na2S2O3·5H2O) was used as sulphur doping agent at 800°C to enhance conductivity of the activated carbons. Supercapacitor electrodes were prepared from both the activated carbon (WTAC) and sulphur doped activated carbon (WTAC-S) samples and the electrochemical performances were tested in the presence of 6 M KOH and 1 M H2SO4 as electrolytes. The activated carbon samples were characterised by Brunauer–Emmett–Teller (BET) surface area, Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) and Fourier Transform Infrared Spectroscopy (FTIR) analysis techniques. The electrochemical performance analyses were performed by galvanostatic charge–discharge (GCD), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. The specific capacitance values of the WTAC and WTAC-S samples under the 1 A g−1 current density were found to be 89.3, 144.7 F g−1 for KOH electrolyte and 73.8 and 101.9 F g−1 for H2SO4 electrolyte, respectively. The results show that the sulphur doping process enhances the electrochemical performance of activated carbon samples. GRAPHICAL ABSTRACT
1 April 2021 in Journal of Environmental Chemical Engineering
Bu çalışmada çay fabrikası atığından H3PO4 aktivasyonu ile aktif karbon üretilmiş, üretilen örneklere farklı derişimlerde (v/v, % 3,33, % 10, % 20 ve % 40) HNO3 kullanılarak asidik yüzey modifikasyonu işlemi uygulanmıştır. Örneklerin süperkapasitör elektrot malzemesi olarak kullanılabilirliği, sulu asidik elektrolit (1 M H2SO4) ortamında test edilmiştir. İşlem görmemiş ve modifiye aktif karbon örneklerinin yüzey karakterizayonu çeşitli kimyasal ve fiziksel yöntemlerle gerçekleştirilmiş, yüzey oksijenli grupların tipi ve miktarının elektrokimyasal performans üzerine etkisi araştırılmıştır. Sonuç olarak, modifikasyonda kullanılan asit derişiminin aktif karbonun yüzey alanı ve gözenekliliğini önemli oranda etkilediği belirlenmiştir. Asit derişimi % 3,33’ün üzerine çıktığında yüzey alanında büyük düşüş gözlenmiştir. Asit derişiminin artmasıyla yüzeydeki oksijenli grupların derişiminde artış gözlenirken, fonksiyonel grup tipi farklılık göstermektedir. % 3,33 HNO3 ile modifiye edilen örnekten hazırlanan elektrot, işlem görmemiş aktif karbondan hazırlanan elektrota göre daha iyi performans sergilemiş, asit derişimi arttıkça elektrot performansında elektrot iç direncindeki artışa bağlı olarak önemli ölçüde düşüş gözlenmiştir.
The wide operating temperature and voltage window are favourable properties that increase the practical applications of supercapacitors. Ionic liquids (IL) are suitable electrolytes that allow supercapacitors to be used in wide operating ranges. In this study, triethylammonium tetrafluoroborate (Et3NHBF4) is tested as a new IL to operate supercapacitors in a wide temperature range (−40 °C, 25 °C, and 80 °C) in the presence of commercial activated carbon. The performance of Et3NHBF4 is compared to two different commercial ILs. This study also investigates the application of heat treatment to determine suitable activated carbon surface characteristics for ILs. The results indicate that heat treatment enhances the electrode–electrolyte interaction, and the electrochemical performances of the supercapacitors prepared from the heat-treated activated carbon are significantly higher than the original commercial activated carbon. Electrochemical tests show that the synthesised Et3NHBF4 (with propylene carbonate) can be used over a wide temperature range and has a better energy storage performance, especially at −40 °C (specific capacitance of 42.12 F/g at 2 A/g), compared to the other two commercial ionic liquids.