Recycling precious metals from electronic waste by bioleaching stands out as a sustainable technology for metal solubilisation using microorganisms. In this study, the recovery of pure copper from waste printed circuit boards was performed through an indirect approach by sequential bioleaching and electrowinning. The bacterium Acidithiobacillus ferrooxidans was cultivated in a stirred tank reactor for the continuous production of ferric iron (Fe3+) as the primary leaching agent for batch leaching at pulp densities and temperature up to 8 % w/v and 40 °C, respectively. A leaching rate of 50 % copper was achieved at a pulp density of 6 % w/v, 40 °C and 96 h spent time. The finding was used as a reference for flow leaching operations in a continuous stirred tank reactor and rates of 100 % and 80 % of copper were leached with and without pH control, respectively, at 40 °C, and a hydraulic residence time of 96 h. A rate of 70.85 % of pure copper was then recovered from the metal rich solution by electrowinning using a current density of 0.0168 A/cm2 over 8 h. These results provide valuable insights into the continuous recovery of copper from electronic wastes and contribute to the ongoing strategies of design and scale-up toward industrially viable operations.
The rapid consumption and disposal of electronic waste due to technological innovations and changes in living commodities are causing the development of a significant environmental challenge. Among the components of these wastes, spent printed circuit boards are particularly considered to be among the most valuable owing to their content of precious metals, such as gold first and potentially platinum, which may be available in a lower proportion. Effective methods as part of gold recovery strategies by industries and policymakers are developed and envisioned from economic and environmental perspectives. Currently, cyanidation dominates global gold production from e-waste due to its selectivity for gold. The high toxicity of cyanide, however, poses serious environmental issues, leading thiosulphate leaching to emerge as a non-toxic and promising alternative for gold extraction. Its industrial viability has been demonstrated by Barrick Gold Corporation at the Goldstrike site with the pretreatment of acidic or alkaline pressure oxidation. This review introduces bioleaching as a promising economic and environmentally friendly process for gold extraction. This review explores thiosulphate leaching of gold as an alternative to conventional cyanidation, with a particular focus on biothiosulphate production by adapted microorganisms. The factors that affect the pretreatment, chemical reaction mechanism, and design engineering are discussed. The consumption of thiosulphate was identified as one of the main challenges, restricting the reliability of the process. Various solutions for the reduction of its consumption and relevant process costs were discussed, with a particular examination from the engineering aspect of the process design and scalability to industrially relevant operating conditions by using bioreactors adapted to large pulp density loads of electrical waste.
Spent automotive catalysts represent an important secondary resource for platinum group metals, offering environmental and economic advantages over primary mining. This review evaluates bioleaching-based recovery strategies of these metals as sustainable alternatives to conventional pyrometallurgical and hydrometallurgical processing. The cyanogenic bioleaching using Chromobacterium violaceum, Pseudomonas fluorescens, and Bacillus megaterium, and acidophilic bioleaching using Acidithiobacillus spp. for washcoat degradation and base-metal removal are discussed through the one-step, two-step, spent-medium, and decoupled systems. The analysis shows progressive improvement of recovery as process separation increases. Sequential pretreatment involving ultrasound-assisted acid leaching, thermal oxidation, and pressure-enhanced processing improved recovery by removing competing base metals and increasing PGM accessibility. Kinetic analyses indicate that diffusion through the porous catalyst support matrix becomes the dominant rate-controlling mechanism at high conversion, which impacts reactor design. Despite sustainability potential, industrial implementation remains constrained by low pulp density, cyanide stability, reactor productivity, and scale-up limitations. Routes to commercialisation require feasibility studies of process designs that integrate viable process flow diagrams combining pretreatment, biological lixiviant generation, intensified bioleaching, and downstream metal purification.