Maintaining a Constant False Alarm Rate (CFAR) in the presence of K-distributed sea clutter is vital due to the dynamic and unpredictable nature of maritime environments. However, conventional CFAR detectors suffer significant performance degradation in multi-target scenarios, primarily due to the masking effect caused by interfering targets. To address this challenge, this paper introduces an advanced detection scheme that integrates Linear Density-Based Spatial Clustering for Applications with Noise (Lin-DBSCAN) with CFAR processing. Lin-DBSCAN is specifically tailored to efficiently identify and isolate interfering targets and sea spikes, which typically manifest as outliers in the symmetric reference windows surrounding the Cell Under Test (CUT). By leveraging Lin-DBSCAN, the proposed Lin-DBSCAN-CFAR method effectively filters out anomalous signals from the background clutter, resulting in enhanced detection accuracy and robustness, especially under complex sea clutter conditions. Extensive simulations under varying conditions, including multiple target environments, varying false alarm rates, and different clutter shape parameters, demonstrate that Lin-DBSCAN-CFAR significantly outperforms conventional CFAR approaches. It is noteworthy that the proposed method achieves detection performance comparable to the more computationally intensive DBSCAN-CFAR while significantly reducing computational complexity. Simulation results reveal that Lin-DBSCAN-CFAR requires a 1 to 2 dB lower SNR to reach a detection probability of 0.8 compared with the nearest traditional CFAR techniques, confirming its superiority in both accuracy and efficiency.
1 September 2019 in Journal of Physics: Conference Series
A new interpolation technique based on an optimized near end-points Akima’s cubic spline method is proposed in order to plot the profile of longitudinal section in a boat such that the aerodynamic properties will be improved. As a result of the method, the boat shape permit to reduce the water resistance in the forward motion. The method is illustrated by simulating the boat shape using the proposed method in comparison with the shapes provided by the natural cubic spline and by the Akima’s cubic spline interpolation procedures.