D. Naidoo

Dr. D. Naidoo

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2024 in Advances in Polymer Technology
Verified
Journal Article
Open access
SOStanley Chibuzor Onwubu
Stanley Chibuzor Onwubu
DND. Naidoo
D. Naidoo
ZOZodidi Obiechefu
Zodidi Obiechefu
Thabang Hendrica MokhothuThabang Hendrica Mokhothu
Thabang Hendrica Mokhothu
PMPhumlane Mdluli
Phumlane Mdluli
Ajay Kumar MishraAjay Kumar Mishra
Ajay Kumar Mishra
Epoxy polymer composites reinforced with fish scale‐derived collagen (EFC) have garnered significant interest due to their potential for enhancing mechanical properties and environmental sustainability. In this study, we investigated the mechanical, thermal, and morphological characteristics of epoxy composites reinforced with varying concentrations of EFC (5%, 10%, 15%, 20%, and 25% wt). Tensile strength testing revealed an initial increase in Young’s modulus with 5% and 10% EFC concentrations, followed by a decrease at higher concentrations, attributed to agglomeration effects. Flexural strength (FS) exhibited a decreasing trend with increasing EFC content, while flexural modulus (FM) showed improvement up to 20% EFC loading. Scanning electron microscopy (SEM) analysis highlighted the distribution of collagen particles, with agglomeration observed at higher concentrations. Fourier‐transform infrared spectroscopy (FTIR) spectroscopy indicated alterations in hydrogen bonding with the addition of EFC. Thermal analysis revealed a reduction at onset degradation temperature with EFC incorporation, attributed to poor dispersion and agglomeration effects, alongside a slight enhancement in thermal stability at higher concentrations. The study supports the sustainable use of EFC as a filler, by offering a renewable and eco‐friendly alternative to reinforcing polymer composites.

6 October 2024 in Polymers
Verified
Journal Article
Open access
PDF file
ZOZodidi Obiechefu
Zodidi Obiechefu
SOStanley Chibuzor Onwubu
Stanley Chibuzor Onwubu
DND. Naidoo
D. Naidoo
Thabang Hendrica MokhothuThabang Hendrica Mokhothu
Thabang Hendrica Mokhothu
PMPhumlane Mdluli
Phumlane Mdluli
The utilization of biowaste fillers in the development of high-density polyurethane (PU) foams has gained significant attention due to environmental and economic benefits. This study investigates the mechanical properties of PU foams reinforced with biowaste fillers extracted from fish scales (FS) and fish scale-derived collagen (FSC). The fish scales and collagen were characterized for their composition and integrated into PU foams at various loadings. Mechanical properties such as tensile strength, hardness, and density were evaluated. ANOVA was used to analyze the mean values. Bonferroni tests were used to identify differences between the filler materials (α = 0.05). The tensile strength increases with an increase in filler content for both FS (59.48 Kpa) and FSC (65.43 Kpa). No differences were observed between FS and FSC in tensile strength. Significant differences were observed between the FS and FSC in both hardness and density (p < 0.001). The results demonstrated that both fillers enhanced the mechanical properties of PU foams, with collagen-reinforced foams showing superior performance. This suggests that collagen and fish scales can be effective biowaste fillers for developing environmentally friendly PU foams with enhanced mechanical properties.

1 January 2024 in Advances in Polymer Technology
Verified
Journal Article
Open access
DND. Naidoo
D. Naidoo
SOStanley Chibuzor Onwubu
Stanley Chibuzor Onwubu
Thabang Hendrica MokhothuThabang Hendrica Mokhothu
Thabang Hendrica Mokhothu
PMPhumlane Mdluli
Phumlane Mdluli
MMM. U. Makgobole
M. U. Makgobole
Ajay Kumar MishraAjay Kumar Mishra
Ajay Kumar Mishra
This study is based on the utilization of fish scale‐derived collagen (FSC) as a potential filler material in polyurethane foam (PUF) composites. The composites were prepared with varying FSC concentrations (2.5%, 5 wt%, and 10 wt%) with the standard PUF matrix, while calcium carbonates in the standard sample (STD) were completely substituted with 50 wt% of collagen. When examining the effects of collagen concentration on mechanical characteristics, complex correlations emerge between tensile strength, elongation, tear resistance, and ductility. The results reveal that the addition of 2.5 wt% FSC increased tensile strength by 12.66% during heat aging, while the addition of 5 wt% at standard temperature increased elongation by 6.65%. Under normal conditions, collagen significantly enhanced the material’s resistance to tearing, demonstrating its potential for long‐term durability. Under typical conditions, tear resistance showed notable gains, increasing by 84.85% (50 wt% FSC) and 33% (10 wt% FSC), respectively. The tear resistance, however, diminishes under heat aging for all concentrations. Morphological assessments indicate a consistent closed cell structure across all samples, with collagen potentially contributing to reinforcement. The study supports the sustainable use of fish scale‐derived collagen as a filler, addressing waste management challenges and aligning with principles of environmentally conscious material development.

17 December 2024 in Marine Drugs
Verified
Journal Article
Open access
PDF file
MMMokgadi Ursula Makgobole
Mokgadi Ursula Makgobole
SOStanley Chibuzor Onwubu
Stanley Chibuzor Onwubu
ABAbayomi Solomon Baruwa
Abayomi Solomon Baruwa
Nomakhosi MpofanaNomakhosi Mpofana
Nomakhosi Mpofana
ZOZodidi Obiechefu
Zodidi Obiechefu
BMBlessing Nkazimulo Mkhwanazi
Blessing Nkazimulo Mkhwanazi
Collagen, a critical biomaterial with wide applications in pharmaceuticals, cosmetics, and medical industries, can be sourced sustainably from fish scales. This study optimizes the extraction of collagen using Tris-Glycine buffer from fish scales via the Taguchi method. Various extraction parameters—buffer concentration, temperature, pH, and time—were evaluated to identify optimal conditions. Under optimal conditions (0.5 M of acetic acids, volume of acids of 100 mL, soaking time of 120 min, and Tris-Glycine buffer of 10 mL), the results demonstrate that temperature and buffer concentration significantly influence collagen yield, with a collagen purity of 17.14 ± 0.05 mg/g. R2 value of 73.84% was obtained for the mathematical model). FTIR analysis confirmed the presence of characteristic collagen peaks at 1611 cm−1 (amide I), 1523 cm−1 (amide II), and 1300 cm−1 (amide III), indicating the successful extraction of type I collagen. SDS-PAGE analysis revealed a protein banding pattern consistent with the molecular weight of collagen, and amino acid analysis shows high percentages of glycine (20.98%), proline (15.43%), and hydroxyproline (11.51%), implying fibrous collagen structures. The finding suggests that the Taguchi method offers an efficient and sustainable approach for collagen extraction, reducing waste from fish processing industries. Nevertheless, there is a need for further experimental validation to align with mathematical modeling on the optimized conditions.

17 February 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
SOStanley Chibuzor Onwubu
Stanley Chibuzor Onwubu
DND. Naidoo
D. Naidoo
ZOZodidi Obiechefu
Zodidi Obiechefu
Thabang Hendrica MokhothuThabang Hendrica Mokhothu
Thabang Hendrica Mokhothu
Polymeric composites, particularly epoxy and polyurethane systems, have gained significant attention due to their excellent mechanical, thermal, and chemical properties. However, the environmental concerns associated with petroleum-based polymers have driven research towards biobased alternatives. This review explores the integration of biobased filler materials derived from agricultural and marine waste into epoxy and polyurethane matrices to enhance their performance while promoting sustainability. The empirical review of epoxy and polyurethane resins reinforced with natural fillers highlights the significant role of bio-based additives in enhancing mechanical properties while promoting sustainability. Findings from reviewed studies demonstrate that natural fillers such as jute, sisal, lignin, and rice husk fish scales improve tensile strength, flexural strength, and wear resistance of polymer composites. However, excessive filler content can lead to agglomeration, reducing mechanical integrity. Optimal filler content varies depending on polymer type, with moderate concentrations yielding the best mechanical performance. Additionally, chemical modifications, such as silane treatment and alkalization, enhance filler-polymer adhesion, further improving material properties. Despite their advantages, challenges such as moisture sensitivity and long-term durability require further investigation.

5 November 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
MMMokgadi Ursula Makgobole
Mokgadi Ursula Makgobole
SOStanley Chibuzor Onwubu
Stanley Chibuzor Onwubu
ABAbayomi Solomon Baruwa
Abayomi Solomon Baruwa
Nomakhosi MpofanaNomakhosi Mpofana
Nomakhosi Mpofana
ZOZodidi Obiechefu
Zodidi Obiechefu
BMBlessing Nkazimulo Mkhwanazi
Blessing Nkazimulo Mkhwanazi
Collagen, a critical biomaterial with wide applications in pharmaceuticals, cosmetics, and medical industries, can be sourced sustainably from fish scales. This study optimizes the extraction of col-lagen using Tris-Glycine buffer from fish scales via the Taguchi method. Various extraction pa-rameters—buffer concentration, temperature, pH, and time—were evaluated to identify optimal conditions. Under optimal conditions (0.5 of acetic acids, volume of acids of 100mL, soaking time of 120 min, and Tris-Glycine buffer of 10mL), the results demonstrate that temperature and buffer concentration significantly influence collagen yield, with a collagen purity of 17.14 ± 0.05 mg/g. R2 value of 73.84% was obtained for the mathematical model). FTIR analysis confirmed the pres-ence of characteristic collagen peaks at 1611 cm⁻¹ (amide I), 1523 cm⁻¹ (amide II), and 1300 cm⁻¹ (amide III), indicating the successful extraction of Type I collagen. SDS-PAGE analysis revealed a protein banding pattern consistent with the molecular weight of collagen, and amino acid analysis shows high percentages of glycine (20.98%), proline (15.43%), and hydroxyproline (11.51%), im-plying fibrous collagen structures. The finding suggests that the Taguchi method offers an efficient and sustainable approach for collagen extraction, reducing waste from fish processing industries.