This paper investigates the photocatalytic performance of ZnO−SnO2 nanocomposites deposited using the Spray Pyrolysis technique, with varying percentages of tin oxide (20, 60, and 80%) on glass substrates at 350 °C. Comprehensive characterization of the samples was carried out using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and UV–Vis spectroscopy to analyze their structural, morphological, and optical properties. The XRD analysis confirmed the hexagonal structure of zinc oxide and the tetragonal phase of tin oxide in the nanocomposites. The average crystallite size was found to decrease with an increase in the percentage of tin oxide. The UV–Vis spectra demonstrated that the band gap energy of the ZnO−SnO2 nanocomposite increased from 3.29 to 3.64 eV as the amount of Sn increased. The Urbach energy decreases reflecting an improvement in the structural and electronic quality of the material, with fewer defects and better crystallinity. Additionally, The SEM results reveal a transition in surface morphology with increasing Sn content, shifting from a smooth, compact structure to a highly aggregated particle surface, with the highest thickness (740 nm) observed at 80% SnO2. Remarkably, the ZnO−SnO2 nanocomposite with 80% tin exhibited superior photocatalytic activity, successfully degrading 91% of methylene blue solution within 180 min under UV irradiation. Moreover, the stability and reusability of the sample were demonstrated through repeated photocatalytic cycles. The use of a chemical synthesis technique for the elaboration of the Sn:Zn mixed nanocomposite and UV light as catalyzer which, is well suited for large bandgap materials, optimizes this work by providing an increased contact surface area and facilitating the interaction between the photocatalyst and the target molecules. These findings highlight its potential for effective environmental applications, specifically in photocatalysis for pollution control and environmental protection. The results collectively suggest that ZnO−SnO2 nanocomposites, deposited through the spray method, represent promising candidates for advancing photocatalytic technologies.
Notwithstanding the success of SnO2 as a fundamental material for gas sensing, it has often been criticized for its cross-sensitivity and high operational temperatures. Therefore, in this study, RF-sputtered SnO2 thin films were subjected to a modification process through doping with a rare earth element, dysprosium (Dy), and subsequently deposited onto two different types of substrates: alumina and glass substrates. All thin films underwent a comprehensive series of characterizations aimed at ensuring their suitability as NO2 sensors. The dysprosium doping levels ranged from 1 to 7 wt.% in increments of 2% (wt.%). X-ray patterns showed that all deposited films exhibited the tetragonal rutile structure of SnO2. The optical band gap energy (Eg) increased with Dy doping, while the Urbach energy decreased with Dy doping. Field emission scanning electron microscopy (FESEM) revealed highly compacted grainy surfaces with high roughness for alumina substrate thin films, which also exhibited higher resistivity that increased with the levels of Dy doping. Energy-dispersive X-ray spectroscopy (EDX) analyses confirmed the stoichiometry of both types of thin films. Gas sensing tests were conducted at different operating temperatures, where the highest response to nitrogen dioxide, over 42%, was recorded for the higher dopant level at 250 °C. Moreover, the sensor’s selectivity toward nitrogen dioxide traces was evaluated by introducing interfering gases at higher concentrations. However, the sensors showed also significant responses when operated at room temperature. Also, we have demonstrated that higher stability is related to the temperature of the sensors and Dy ratio. Hence, a detailed discussion of the gas-sensing mechanisms was undertaken to gain a deeper insight into the NO2 sensitivity exhibited by the Dy-doped SnO2 layer.
This study investigates the synthesis, characterization, and application of chemically reduced graphene oxide (rGO) thin films fabricated from a graphene oxide (GO) nanocolloidal solution using varied dosages of hydrazine hydrate (HH) as the reducing agent. Using a spray deposition technique, we obtain rGO thin films with distinct properties regarding their electrical conductivity, optical absorption, and surface morphology. X-ray diffraction and Raman spectroscopy confirm that increased HH levels lead to greater reduction, while a significant drop in sheet resistance accompanies the decrease in the oxygen-to-carbon ratio in rGO. The progressive reduction of GO slightly shifts the apparent optical transition energy and leads to a broader optical absorption. Interestingly, we observe a transition from a uniform GO structure to a porous, sponge-like morphology as the rGO is subjected to larger reduction levels. We then evaluated the photocatalytic performance of the rGO thin films under natural sunlight. The presence of rGO thin films enhances the degradation of methylene blue and methyl orange dyes by 82 and 75%, respectively, with the highest level of photocatalytic activity observed, with the sample corresponding to the highest reduction level. Furthermore, we show that the photocatalytic material retains performance over three reuse cycles, suggesting the potential for extended use. Our study underscores the potential of rGO thin films as practical, efficient, stable solar-light-driven photocatalysts, demonstrating their potential for solar-driven water treatment.