Valerii Kosarchur

Prof. Dr. Valerii Kosarchur


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 April 2022 in Lubricants
Verified
Journal Article
Open access
PDF file
VKValerii Kosarchur
Valerii Kosarchur
MCMykola Chausov
Mykola Chausov
APAndrii Pylypenko
Andrii Pylypenko
VTVolodymyr Tverdomed
Volodymyr Tverdomed
Pavlo MaruschakPavlo Maruschak
Pavlo Maruschak
VVVasyl Vasylkiv
Vasyl Vasylkiv
This paper provides experimental data on the effective use of a new lubricating composition, which includes industrial oil of any brand with the addition of a nanometal of the component of a friction pair, which has a lower hardness. It is shown that this composition significantly reduces the wear resistance of the rails and wheels of rolling stock during operation, prevents electrochemical corrosion of the friction pair wheel–rail and, most importantly, stabilizes the coefficient of friction at the optimum level after a relatively short operating time. The experiments were performed on the friction pair, “sample of the bandage material of the railway wheel—a sample of the rail material”, with a ratio of hardness of the bandage material (Rockwell hardness, HRC scale—35.3) to the hardness of the rail material of 1.1. Test results show that in the case of industrial lubricant, the BioRail brand, with the addition of a nanomaterial friction pair with lower wear hardness of the rail metal sample, after three hours in operation the wear was practically not observed. Moreover, the average value of the friction coefficient for three hours of operation was maintained at the level 0.25, which is optimal for the friction pair wheel–rail. Similar experiments using only the same lubricant brand showed much worse results.

29 September 2022 in Lubricants
Verified
Journal Article
Open access
PDF file
VKValerii Kosarchur
Valerii Kosarchur
MCMykola Chausov
Mykola Chausov
APAndrii Pylypenko
Andrii Pylypenko
VTVolodymyr Tverdomed
Volodymyr Tverdomed
Pavlo MaruschakPavlo Maruschak
Pavlo Maruschak
AMAbdellah Menou
Abdellah Menou
The authors have previously proposed and tested a method for increasing the wear resistance of heavy-loaded friction pairs by saturating industrial lubricants with the metallic nanopowder of the friction pair’s component that has a lower hardness. To confirm the effectiveness of this concept, this paper presents the results of experimental investigations into the tribological characteristics of two medium carbon steels (rail steel K74 and structural steel 20) during sliding friction. Friction surfaces lubricated with compositions based on the Bio Rail industrial lubricant were saturated with nanopowder additives of copper, carbon, and magnesium alloy, as well as K74 and 20 steels. The research findings indicate that lubricants saturated with nanomaterials of K74 and 20 steels help achieve the highest wear resistance, as compared to lubricants based on pure grease and lubricating compositions based on copper, magnesium alloy and carbon powders. The test results confirmed that the mean friction coefficient of the rail steel remained at the level of 0.25 for three hours of operation, which is optimal for the “wheel–rail” friction pair. The proposed method of manufacturing lubricating compositions can be used to improve the efficiency of lubrication of railway rails and rolling stock wheels.

10 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
VKValerii Kosarchur
Valerii Kosarchur
VTVolodymyr Tverdomed
Volodymyr Tverdomed
OBOlha Bambura
Olha Bambura
One of the tasks of ensuring the safe and sustainable operation of railway transport is to assess the life cycle of the railway track and its elements—in particular, rails. It is known that the main cause of their failure is the development of defects that arise as a result of contact of rails with the wheels of rolling stock—contact fatigue defects. Modern approaches to predicting the contact-fatigue endurance of railway rails and wheels of rolling stock are based on the use of the kinetic theory of damage. The basis of such predictions is the calculation of the stress–strain state of rails under the action of combinations of external force and temperature influences, which is associated with the need to solve spatial boundary value problems of contact interaction. The complexity of such problems necessitates the use of numerical methods, such as the finite element method in particular, for their solution. This paper considers the features of constructing calculation schemes for such problems. Attention is primarily paid to assessing the influence of some design parameters of the rail track and wheels on the magnitude and distribution of stresses in the contact zone. The results will be useful for understanding the physical processes of damage accumulation, the occurrence and development of defects in rails and wheels, as well as for developing methods for predicting the contact fatigue endurance of important elements of railway infrastructure.

1 May 2025 in Strength of Materials
Verified
Journal Article
Closed access
PDF file
VKValerii Kosarchur
Valerii Kosarchur
VTV. M. Tverdomed
V. M. Tverdomed
OBO. V. Bambura
O. V. Bambura
VKV. V. Kovalchuk
V. V. Kovalchuk
MDM. E. Demchenko
M. E. Demchenko