Several analyses have been published in the specialized literature on the use and performance of distinct prestack seismic attributes as direct hydrocarbon indicators (DHI). The main idea is to use combinations of those attributes, in particular the P and S impedances (IP and IS), to minimize the dry rock frame contribution, that cause the increase of the pore fluid discrimination capacity.
The deposition of the presalt section from Santos Basin began when Gondwana started to break up and South America and Africa were separating. Initial synrift carbonate deposits affected by relatively severe tectonic activity evolved to a lacustrine carbonate environment during the later stages of basin formation. Although the reservoirs are composed of carbonate rocks, the occurrence of faults and the intense colocation of igneous rocks served as a source of chemical elements uncommon in typical carbonate environments. Consequently, beyond the presence of different facies with complex textures and pore geometries, the presalt reservoir rocks present marked compositional and microstructural variability. Therefore, rock-physics modeling is used to understand and interpret the extensive laboratory measurements of P-wave velocities, S-wave velocities, and density that we have undertaken on the presalt carbonate cores from Santos Basin. We show that quartz and exotic clay minerals (such as stevensite and other magnesium-rich clay minerals), which have different values of elastic moduli and Poisson's ratio as compared to calcite and dolomite, may introduce noticeable “Poisson's reflectivity anomalies” on prestack seismic data. Moreover, although the authors concentrate their attention on composition, it will become clear that pore-space geometry also may influence seismic rock properties of presalt carbonate reservoirs.
1 January 1998 in Geological Society, London, Special Publications
In order to improve hydrocarbon production, it is often necessary to obtain more accurate rock, fluid and petrophysical information. For example, to obtain a reservoir porosity map using seismic data as reference, it is necessary to generate reliable correlations between seismic attributes and petrophysical properties like porosity and permeability. Again, to optimize drilling and/or hydraulic fracturing programs, it is also necessary to estimate better formation static mechanical behaviour from geophysical data. The main goal of this work is to establish for an offshore Brazilian field, relationships between compressional and shear wave velocities and petrophysical properties such as porosity and permeability. The large number of limestone samples (120) gave us a precise empirical relationship between V s and V p for limestone. In order to obtain a calibration reference, we also made, with the same samples, simultaneous measurements of dynamic and static elastic constants. Using all these laboratory relationships, it was possible to generate unmeasured pseudo-logs of in situ parameters, which include: shear wave velocity, static and dynamic elastic constants and permeability. The good experimental relationships obtained between k -φ and V p-φ in this work together with available logs give us an additional method to estimate permeability which is impossible to obtain from in situ measurements.
Recent applications of seismic data in reservoir characterization, direct hydrocarbon indication, and production monitoring rely on the accuracy of elastic logs (density and sonic). Trying to develop (semi) quantitative seismic-based studies requires the use of well-to-seismic calibration; the well information is used as a bridge between the geology and the surface seismic data. Nevertheless, we must take into account that well logs are also indirect measurements of rock properties and subject to various sources of errors. Borehole wall rugosity due to washouts (or even threaded well bore) and mud filtrate invasion are the main sources of uncertainty on elastic logs. Velocity dispersion and shale alteration can also be very important.
Brazilian presalt reservoirs comprise carbonate rocks saturated with light oil with different amounts of CO2 and excellent productivity. The occurrence of giant-size accumulations with such productivity generates the interest in production monitoring tools, such as time-lapse seismic. However, time-lapse seismic may present several challenges, such as imaging difficulties, repeatability, and detectability of small variations of reservoir properties. In addition, when assessing time-lapse seismic feasibility, the validity of Gassmann’s modeling for complex, heterogeneous carbonate rocks is arguable. Other questions include the pressure variation effects on the seismic properties of competent rocks. The effective stress is a linear combination of confining stress and pore pressure that governs the behavior of physical properties of rocks. Many applications assume that the effective stress for elastic-wave velocity is given by the difference between confining stress and pore pressure, whereas another common approach uses the Biot-Willis coefficient as a weight applied to the pore pressure to estimate the effective stress. Through a series of experiments involving ultrasonic pulse transmission on saturated core plugs in the laboratory, we verified the applicability of Gassmann’s fluid substitution and estimated the empirical effective stress coefficients related to the P- and S-wave velocities for rock samples from two offshore carbonate reservoirs from the presalt section, Santos Basin. We observed that Gassmann’s equation predicts quite well the effects of fluid replacement, and we found that the effective stress coefficient is less than one and not equal to the Biot-Willis coefficient. Moreover, there is a good agreement between the static and dynamic Biot-Willis coefficient, which is a suggestion that the presalt rocks behave as a poroelastic media. These observations suggest that more accurate time-lapse studies require the estimation of the effective stress coefficient for the particular reservoir of interest.