Aquaponics integrates aquaculture and hydroponics, promoting circularity through the recirculation of water and nutrients. However, waste management remains a challenge. This study aimed to evaluate the anaerobic digestion (AD) of aquaponic effluent (AE) combined with cattle manure (CM) for biogas production. An Indian model biodigester was fed with AE, CM and 1:1, 1:3, and 3:1 W (Water):CM, under anaerobic mono-digestion (MoAD) and 1:1, 1:3, and 3:1 AE:CM under anaerobic co-digestion (CoAD) conditions. The chemical characteristics of the substrates and digestates were assessed, as well as the potential for biogas production over 19 weeks. Overall, CoAD provided better results regarding the chemical characterization of the substrates aimed at biogas production. Notably, the 1:3 AE:CM ratio resulted in the most promising outcomes among the tested conditions. This ratio demonstrated higher efficiency, initiating biogas production by the third week and reaching the highest accumulated volume. It is probable that AE increased the dissolved organic load, optimizing the conversion of organic matter and eliminating the need for additional water in the process. Thus, the CoAD of AE and CM emerged as a promising alternative for waste valorization in aquaponics, contributing to renewable energy generation, agricultural sustainability, and the promotion of the circular economy.
In the present study, the microalga Spirulina platensis (Arthrospira) was grown in two horizontal photobioreactors (HPBR) under two different irradiances (150 and 270 μmol m-2 s-2). Anaerobically digested cattle wastewater (ACWW) was used as substrate. The experiment was carried out in batches for a period of 8 days. The maximum specific growth rate of 0.347 day-1 and the doubling time of 2.08 days were obtained under the highest illumination of the culture. Dry biomass production reached maximum values between 2.17 g L-1 and 6.52 g L-1, with volumetric biomass productivities between 0.0812 and 0.5578 g L-1 day-1. Productivity per area was equal to 47.97 g m-2 d-1, which is the highest value recorded compared to those found in the literature consulted. As for CO2 biofixation, relevant values for reducing this gas in the atmosphere were obtained, ranging from 128.52 to 882.36 mg L-1 day-1. In terms of organic matter, 16.3-77% of BOD5 and 12.6-61.6% of COD were reduced. In the reduction of TS, TSS and VSS, values of 71.3-78.5%, 79.5-84.4% and 87.0-88.3%, respectively, were reached. NH4+ reduction was 32.5-98.3%, organic nitrogen reduction was 20.3-95.9% and total phosphorus reduction was 33.5-89.9%. The reductions of thermotolerant coliforms were between 71.7% and 99.9%. In view of the results found, it can be considered that the bioremediation of the effluent reached promising efficiencies, with the advantage of producing biomass with potential to obtain bioproducts of relevant economic value
Anaerobic digestion (AD) is a sustainable strategy for converting hazardous wastes into renewable energy while supporting Sustainable Development Goals (SDGs). This study aimed to evaluate the effect of inoculum on optimizing biogas production from sewage sludge (SS) and cattle manure (CM). Bench-scale digesters were fed with 0, 20, and 40% inoculum prepared at a 1:3 SS:CM ratio. Substrate and digestate were analyzed for physicochemical properties, and biogas production data were fitted using nonlinear models. Kinetic parameters ranged from 0.0770 to 0.4691 L·kg−1 for Ymax, from 1.0263 to 2.1343 L·kg−1·week−1 for μmax, and from 0.8168 to 8.0114 weeks for λ, depending on the ratio. The 1:3 SS:CM with 40% inoculum significantly improved biogas production by reducing the lag phase and increasing weekly yield, with the Gompertz model showing the best fit to the digestion kinetics. This was particularly evident due to the favorable conditions for microbial adaptation and efficient substrate degradation. The results reinforce the concept of optimization as defined in this study, wherein the application of inoculum enhances the performance of AD by improving the physicochemical conditions of the substrate and accelerating microbial activity, thereby resulting in increased methane (CH4) generation and overall biogas yield.
17 August 2022 in Journal of Aquatic Food Product Technology
The production of organic waste following processing is a problem faced by food industries. Its use in the development of new products is an important strategy for the mitigation of this environmental impact. The aim of the study was to investigate the effects of pineapple residue flour and corn starch on the development of a cooked sausage developed from mechanically separated meat (MSM) from Nile tilapia fillet residues, on sausage humidity, water retention capacity, yield, shrinkage, texture profile, and color L*, a*, and b* evaluations at time zero. Response surface methodology) was used to select the best formulations from the responses of both assessed independent variables, corn starch and pineapple residue flour, ranging, respectively, from 0.29% to 2% and from 3% to 8%. A significant effect (p < .05) of the starch and PRF interaction was noted for moisture, and a PRF effect was detected for WRC, hardness, and chewability.
1 January 2025 in Brazilian Archives of Biology and Technology
This research developed a tool based on the TRL (Technology Readiness Level) metric to characterize the levels of scientific and technological maturity of fish products. The study was based on a descriptive and exploratory research, using a case study and data collection through the application of questionnaires containing semi-structured questions and analysis of examples of referenced material. A TRL calculator model was proposed, adapted to the food segment with emphasis on fish technology. The tool was applied in five projects in the area of fish technology and the results were evaluated through the application of four methodological proposals. The results indicated that the best model for the use of the tool in the food context in fish technology was the proposal developed in this work, efficiently demonstrating the degree of maturity of the projects evaluated.
3 November 2025 in OBSERVATÓRIO DE LA ECONOMÍA LATINOAMERICANA
O crescimento populacional e os desafios relacionados à insegurança alimentar reforçam a importância de estratégias sustentáveis alinhadas à “Agenda 2030” da ONU. O aproveitamento de subprodutos pesqueiros, como peixes descartados (bycatch) e produtos alimentares, como cenouras fora do padrão comercial por forma irregular, mas próprios para consumo, representam uma alternativa promissora para reduzir o desperdício e promover a segurança alimentar. Este estudo avaliou as propriedades físico-químicas e funcionais de almôndegas elaboradas com Ubarana (Albula vulpes) e farinha obtida a partir de cenouras descartadas (Daucus carota L.), associadas à fécula de mandioca e temperos naturais. Por delineamento de misturas, foram analisados 12 tratamentos quanto à textura e umidade. O tratamento T3 (16% de carne de Ubarana, 60% de fécula de mandioca e 4% de temperos) apresentou maior dureza (331,89 N) e mastigabilidade (110,75 N/mm), enquanto o T9 (56% de carne de Ubarana, 10% de fécula e farinha de cenoura, e 4% de temperos) exibiu maior umidade (69,84%) e desempenho de textura comparável a produtos comerciais. Entre os pontos axiais da melhor região, o ponto PT9 (56% de Ubarana, 10% de farinha de cenoura, 10% de fécula e 4% de temperos) apresentou os maiores valores de carotenoides totais pós-bioacessibilidade (1463 µg/100 g⁻¹), digestão proteica (64,6%) e umidade (68,6%). A formulação destacou-se por ser potencialmente “alta em” vitamina A para crianças até 3 anos e “fonte” para adolescentes até 13 anos. Conclui-se que a almôndega de Ubarana enriquecida com farinha de cenoura constitui uma alternativa inovadora, sustentável e nutricionalmente relevante, para segurança alimentar.