Numerical investigations of an anti-corrosion design and the combustion process (original conditions and optimal conditions) were conducted for a 660 MW opposed wall fired boiler. In order to solve high-temperature corrosion of the side wall, a scheme was proposed: slotting in the side wall and introducing air (closing-to-wall air) from the secondary air. The effect of anti-corrosion was disclosed in detail by varying the structures of slotting, gas velocities from nozzles and jet inclination angles. The temperature and NOx distribution in the furnace at optimized conditions were compared with those at the original operating conditions. Simulation results showed that the structures of the slot and gas velocities from the nozzles had a marked effect on anti-corrosion of the side wall. When the gas velocity was 4 m/s, an inclination angle of the gas velocity was not conducive to anti-corrosion of the side wall. When the gas velocity increased at the middle and bottom of the side wall, the anti-corrosion effect increased significantly. When the optimal scheme was adopted, the corrosion area of the side wall decreased obviously, but the furnace temperature and the NOx emission increased slightly. The detailed results of this work promote a full understanding of closing-to-wall air and could help to reduce the corrosive area in pulverized-coal furnaces or boilers.
In this paper, energy management strategy (EMS) model based on deep recurrent neural network is presented to learn optimal torque distribution for the single-axle parallel hybrid electric vehicle. The model has two distinguishing properties: 1) Because EMS is formulated as a time series prediction problem, taking historical data as input of EMS model captures the input-and-output dynamic characteristics and enhances the prediction capability. 2) EMS model based on end-to-end framework directly generates torque distribution results without extracting features of driving cycles and other artificial interference. Extensive simulations are conducted to demonstrate the accuracy and generalization capability of the EMS model in public platform TensorFlow. Comparing with other energy management strategies, our proposed model yields better performance in terms of fuel economy and accuracy. Simulation results show that our proposed EMS model provide a novel way to study the energy management strategy.
15 June 2022 in International Journal of Intelligent Transportation Systems Research
High-efficiency permanent-magnet synchronous motor (PMSM) is a key technology to improve the driving range of batteries in electric vehicles, while the mismatched disturbance that is caused by external disturbances and parameter perturbation may easily result in speed fluctuations and overshoot of the PMSM, which further deteriorate the performance and efficiency of batteries. To solve the problem, a novel nonlinear disturbance observer-based sliding mode control (NDO-SMC) is proposed. Compared with the traditional SMC method, the NDO-SMC scheme has better disturbance rejection ability in the presence of matched and mismatched uncertainties and disturbances by introducing the estimation value of the nonlinear disturbance observer in the sliding surface. Furthermore, owing to the compensation of the disturbance observer, the switching gain is only required to be greater than the bound of the disturbance estimation error rather than that of the disturbance; thus, the chattering problem is substantially alleviated. A rigorous stability proof of the whole closed-loop system is given in detail using Lyapunov theory by designing an appropriate Lyapunov function. The simulation results demonstrate the feasibility and superiority of the proposed NDO-SMC strategy.
31 May 2021 in Turkish Journal of Electrical Engineering and Computer Sciences
The control of nonlinear system is the hotspot in the control field. The paper proposes an algorithm to solve the tracking and robustness problem for the discrete-time nonlinear system. The completed control algorithm contains three parts. First, the dynamic linearization model of nonlinear system is designed based on Model Free Adaptive Control, whose model parameters are calculated by the input and output data of system. Second, the model error is estimated using the Quasi-sliding mode control algorithm, hence, the whole model of system is estimated. Finally, the neural network PID controller is designed to get the optimal control law. The convergence and BIBO stability of the control system is proved by the Lyapunov function. The simulation results in the linear and nonlinear system validate the effectiveness and robustness of the algorithm. The robustness effort of Quasi-sliding mode control algorithm in nonlinear system is also verified in the paper.