Axial suspension plasma spraying (ASPS) is an alternative technique to atmospheric plasma spraying (APS), which uses a suspension of much finer powders (<5-micron particle size) as the feedstock. It can produce more refined microstructures than APS for biomedical implants. This paper highlights the influence of incorporated graphene nanoplatelets (GNPs) on the behavior of ASPS hydroxyapatite (HAp) coatings. The characterization of the ASPS coatings (HAp + varying GNP contents) was carried out using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), confocal Raman microscopy (CRM), white light interferometry (WLI), and contact angle measurements. The evaluation of the mechanical properties such as the hardness, roughness, adhesion strength, and porosity was carried out, along with a fretting wear performance. Additionally, the biocompatibility of the Hap + GNP coatings was evaluated using cytotoxicity testing which revealed a decrease in the cell viability from 92.7% to 85.4%, with an increase in the GNP wt.%. The visualization of the cell’s components was carried out using SEM and Laser Scanning Microscopy. Furthermore, the changes in the genetic expression of the various cellular markers were assessed to analyze the epigenetic changes in human mesenchymal stem cells. The gene expression changes suggested that GNPs upregulated the proliferation marker and downregulated the pluripotent markers by a minimum of three folds.
Sediments often contain a complex mixture of organic and inorganic pollutants, including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), aliphatic and aromatic hydrocarbons, phthalates, tributyltin (TBT), and metals. Since large quantities of contaminated sediments are regularly dredged, it is necessary to develop methods to simultaneously treat the different contaminants. These techniques should also handle complex sediment matrices where pollutants may be strongly bound, e.g., TBT in paint flakes and PAHs in tire particles. This work has focused on the development of photoelectrocatalytic (PEC) processes to degrade organic pollutants (OPs) and simultaneously recover metals from marine, brackish and stormwater sediments. The remediation efficiencies were studied in real contaminated sediments and clear water solutions spiked with PAHs, PCBs, TBT, and metals. In spiked water, PEC yielded a > 99 % reduction of PAHs, PCBs, and TBT, and recovered 76 % of copper. The pollutant removal from the sediments by PEC was less efficient, especially for PAHs in stormwater sediment. However, the combination of PEC and H2O2 reduced other groups of OPs: TBT by 91 %, PCB by 82 %, and phthalates DINP and DEHP by 98 % and 85 %, respectively. The release of pollutants from sediments into the water phase is the key to successful PEC application.
30 September 2026 in Progress in Additive Manufacturing
Alloy 718 substrates were additively manufactured via electron beam-powder bed fusion (EB-PBF), followed by post-processing, using shot peening (SP), hot isostatic pressing (HIP), and a combination of both. The EB-PBF built samples were analyzed in comparison to cast alloy 718 to understand the manufacturing and post-processing influence on the corrosion and erosion performance. The substrates were subsequently coated with NiCoCrAlY using the high-velocity air fuel (HVAF) thermal spray process. Hot corrosion behavior of both coated and uncoated samples was evaluated after 1008 h of exposure to Na 2 SO 4 at 650 °C. The uncoated samples exhibited severe hot corrosion characterized by non-uniform and flaky oxide-scale formation. In contrast, the coated samples showed comparatively less severe oxide degradation, indicating improved corrosion resistance under the tested conditions. The erosion performance revealed severe material removal in the uncoated samples, particularly for the as-built surfaces due to loosely bonded and less deformed particles remaining from the EB-PBF process. Despite the influence of post-processing on substrate surface characteristics, all coated samples exhibited comparable erosion resistance, highlighting the reliability and consistency of the HVAF-sprayed NiCoCrAlY coatings.