The indentation formed on a metallic component by the high-velocity impingement of a small object can fracture the component, and this is known as foreign object damage. In this type of dynamic indentation, it is necessary to consider the effects of work hardening, strain rate hardening, and thermal softening in the impinged material. In this study, in order to consider these effects, the expanding cavity model based on a spherical formulation is modified via the Johnson–Cook constitutive equation for the dynamic indentation problem. Additionally, an equation is developed based on energy conservation and the modified expanding cavity model to predict the size of the indentation formed by an impingement of a solid sphere (EPIS). The distributions of equivalent plastic strain, equivalent plastic strain rate, temperature, and equivalent von Mises stress obtained via the expanding cavity model were in good agreement with the data obtained from the finite element analysis (FEA). Furthermore, it was demonstrated that EPIS accurately predicted the indentation size formed on various metallic materials at several impingement velocities in the range of 50–300 m/s. Consequently, EPIS can be effectively applied to an impingement problem of a hard sphere onto a sufficiently thick ductile material within 300 m/s without any help of FEA.
In recent years, the role of thermal power plants has shifted from providing a baseload to providing supplemental supply to compensate for fluctuations in the output of renewable energy sources. Thus, the operation of these plants involves frequent startup and shutdown cycles, which lead to extensive damage caused by creep and fatigue interactions. In addition, the piping utilized in thermal plants is subjected to a combined stress state composed of bending and torsional moments. In this study, a high-temperature fatigue testing machine capable of generating such a bending-torsional loading was developed. Creep-fatigue tests were conducted on P91 steel piping with weldment. The results clarified that the creep-fatigue life was reduced by the superposition of the torsional and bending moments and that it was further reduced by a holding load. It was shown that the creep-fatigue life of piping with weldment can be estimated accurately using the equivalent bending moment, which is composed of the torsional and bending moments. It was also confirmed that crack occurred in the heat-affected zone (HAZ) of the welded part, which has been often observed in actual thermal power equipment. From the finite element analysis, it was identified that cracking was initiated in the HAZ due to the accumulation of creep strain and increase in the hydrostatic pressure component during a holding load.
14 September 2018 in Journal of Electronic Materials