We propose an “accurate” phase-added stereogram, which can be defined as an improved phase-added stereogram. Generally, the macroblock size transformed by the fast Fourier transform is the same as the segmentation size of the phase-added stereogram. However, the proposed method uses a lager macroblock size than does the conventional method to reduce quantization error in discrete spatial frequencies in the spatial frequency domain. Therefore, even when the fast Fourier transform is used for calculation, the quality of the reconstructed image can be improved to be as clear as the Fresnel hologram.
For practical holographic video display, it is important to generate holographic fringes as fast as possible. It is also important to display the full-color image with a simple display system. In our previous study, a full-color hologram was realized as a rainbow hologram, which discards the vertical parallax to reduce computation complexity. Its color reproduction, however, is not enough. Since this hologram uses the horizontal slit, proper color reproduction can be obtained only from a narrow viewing area in the vertical direction. In contrast, the image hologram provided a good contrast image, although it had only a single color. Also, the image hologram has full-parallax information. In this work, we investigate the image hologram for fast calculation and the display optics for full-color holograms with full parallax. Since image points are located close to the hologram, the required computation area of the image hologram becomes much smaller than that of the entire hologram. Therefore, vastly improved computational speed is obtained. The full-color hologram is displayed on a holographic video display system, which uses part of the original optics and liquid crystal on silicon (LCoS) panels of the conventional video projector to separate and combine color components. From the experimental results, we obtain a full-parallax reconstructed image and better color reproduction compared with the rainbow hologram.
Hologram-like video images have been demonstrated using a stereoscopic display developed by a member of the 3-D project at TAO. Images are made of 45-view stereoscopic images at resolution of 400 by 400 pixels -- each pixel has 45 horizontal parallaxes -- and refreshed at 30 Hz. Stimulation of conventional stereoscopic video display causes a physiological problem, called accommodation-vergence conflict, though it provides multi-view images. Holography is a usual approach to avoid this conflict but it has great difficulty of providing video images. A new stereoscopic approach is described in this paper, called super multi-view (SMV) region. SMV region means the following condition; there are more than two parallax-images passing through a pupil of viewer's each eye. At the SMV region, if viewer accommodates one's focus to the spatial position of 3-D image -- perceived by binocular disparity -- then the parallax-images passed through a pupil are focused to the same position on a retina. Therefore, there is an ability of fusing accommodation and vergence due to the effect of monocular and binocular parallax. To satisfy the SMV condition, the display must provide numerous view images with narrow interval of parallax. It is difficult to satisfy the SMV condition using conventional displaying technique, but the FLA concept (proposed at Practical Holography X, EI '96) realized providing 45-view images with 0.5 degree interval. The design of this display is also described in this paper. SMV technique is just a quasi-holography because reproduced images have natural stimulus for monocular and binocular vision.
A new phase-added stereogram algorithm for accelerated computation of holograms from a point cloud model is proposed. The algorithm relies on the hologram segmentation, sampling of directional information, and usage of the fast Fourier transform with a finer grid in the spatial frequency domain than is provided by the segment size. The algorithm gives improved quality of reconstruction due to new phase compensation introduced in the segment fringe patterns. The result is finer beam steering leading to high peak intensity and a large peak signal-to-noise ratio in reconstruction. The feasibility of the algorithm is checked by the generation of 3D contents for a color wavefront printer.
Since a general flat hologram has a limited viewable area, we usually cannot see the other side of a reconstructed object. There are some holograms that can solve this problem. A cylindrical hologram is well known to be viewable in 360 deg. Most cylindrical holograms are optical holograms, but there are few reports of computer-generated cylindrical holograms. The lack of computer-generated cylindrical holograms is because the spatial resolution of output devices is not great enough; therefore, we have to make a large hologram or use a small object to fulfill the sampling theorem. In addition, in calculating the large fringe, the calculation amount increases in proportion to the hologram size. Therefore, we propose what we believe to be a new calculation method for fast calculation. Then, we print these fringes with our prototype fringe printer. As a result, we obtain a good reconstructed image from a computer-generated cylindrical hologram.